Dendritic structural transformation of laser surface remelted γ-TiAl based alloy during post-heat treatment

被引:6
|
作者
Wu, GQ
Luo, GX
Huang, Z
Ruan, ZJ
机构
[1] Beijing Univ Aeronaut & Astronaut, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
[2] Huazhong Univ Sci & Technol, State Key Lab Laser Technol, Wuhan, Peoples R China
基金
中国国家自然科学基金;
关键词
TiAl based alloy; laser processing; heat treatment; hardness; microstructure;
D O I
10.1016/j.matlet.2005.09.001
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Laser surface remelting followed by heat treatments at 1000 degrees C for different time was carried out on gamma-TiAl based alloy. The characteristics of structural transformation of laser surface remelted gamma-TiAl based alloy were investigated by high-temperature microscope, TEM and XRD. The results show that the phase transformation (alpha(2) -> gamma) in TiAl alloy occurred at the earlier stage of post-heat treatment, and the dendritic structure transformed firstly at the intergranular, then expanded into the transgranular, finally changed to ultrafine equiaxed grain structure, at the same time, micro-hardness of laser-surface remelted gamma-TiAl based alloy had the corresponding change with the structural trans fori-nation. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:406 / 409
页数:4
相关论文
共 50 条
  • [41] A precipitation-strengthened high-entropy alloy prepared by selective laser melting in-situ alloying and post-heat treatment
    Chen, Xinsheng
    Kong, Jian
    Feng, Shuai
    Dong, Kewei
    Liang, Yuzheng
    Wang, Qipeng
    Yang, Yang
    Liu, Xiangkui
    Journal of Alloys and Compounds, 2023, 936
  • [42] Surface chemistry of polyacrylonitrile- and rayon-based activated carbon fibers after post-heat treatment
    Chiang, Yu-Chun
    Lee, Chen-Yueh
    Lee, Hung-Chih
    MATERIALS CHEMISTRY AND PHYSICS, 2007, 101 (01) : 199 - 210
  • [43] Effect of post-heat treatment on the thermophysical and compressive mechanical properties of Cu-Ni-Sn alloy manufactured by selective laser melting
    Kim, Young-Kyun
    Park, Sun-Hong
    Lee, Kee-Ahn
    MATERIALS CHARACTERIZATION, 2020, 162
  • [44] Effect of post-heat treatment on the microstructure and mechanical properties of laser metal deposition Inconel 718
    Pengfei Li
    Jianzhong Zhou
    Yadong Gong
    Xiankai Meng
    Jinzhong Lu
    Journal of Mechanical Science and Technology, 2021, 35 : 2871 - 2878
  • [45] Effect of post-heat treatment on the microstructure and mechanical properties of laser metal deposition Inconel 718
    Li, Pengfei
    Zhou, Jianzhong
    Gong, Yadong
    Meng, Xiankai
    Lu, Jinzhong
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021, 35 (07) : 2871 - 2878
  • [46] Precipitation Kinetics During Post-heat Treatment of an Additively Manufactured Ferritic Stainless Steel
    Chou, Chia-Ying
    Karlsson, Dennis
    Pettersson, Niklas Hollander
    Helander, Thomas
    Harlin, Peter
    Sahlberg, Martin
    Jansson, Ulf
    Odqvist, Joakim
    Lindwall, Greta
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2022, 53 (08): : 3073 - 3082
  • [47] A precipitation-strengthened high-entropy alloy prepared by selective laser melting in-situ alloying and post-heat treatment
    Chen, Xinsheng
    Kong, Jian
    Feng, Shuai
    Dong, Kewei
    Liang, Yuzheng
    Wang, Qipeng
    Yang, Yang
    Liu, Xiangkui
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 936
  • [48] Influence of post-heat treatment on the microstructure and mechanical properties of Al-Cu-Mg-Zr alloy manufactured by selective laser melting
    Wang, Yanfang
    Lin, Xin
    Kang, Nan
    Wang, Zihong
    Liu, Yuxi
    Huang, Weidong
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2022, 111 : 35 - 48
  • [49] Structural Changes in Manganese Oxides on Zeolite Y in Benzene Oxidation with Ozone and Post-Heat Treatment
    Zheng, Xuerui
    Einaga, Hisahiro
    CATALYSIS LETTERS, 2025, 155 (01)
  • [50] Effects of post-heat treatment on anisotropic mechanical properties of laser additively manufactured IN718
    Zhou, Fan
    Hu, Xiaogang
    Zhou, Yang
    Xu, Zhen
    Guo, Chuan
    Li, Gan
    Li, Zhuoyu
    Huang, Yuhe
    Zhu, Qiang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 877