Dendritic structural transformation of laser surface remelted γ-TiAl based alloy during post-heat treatment

被引：6
|
作者：
Wu, GQ
Luo, GX
Huang, Z
Ruan, ZJ
机构：
[1] Beijing Univ Aeronaut & Astronaut, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
[2] Huazhong Univ Sci & Technol, State Key Lab Laser Technol, Wuhan, Peoples R China
来源：
MATERIALS LETTERS | 2006年 / 60卷 / 03期
基金：
中国国家自然科学基金;
关键词：
TiAl based alloy; laser processing; heat treatment; hardness; microstructure;
D O I：
10.1016/j.matlet.2005.09.001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Laser surface remelting followed by heat treatments at 1000 degrees C for different time was carried out on gamma-TiAl based alloy. The characteristics of structural transformation of laser surface remelted gamma-TiAl based alloy were investigated by high-temperature microscope, TEM and XRD. The results show that the phase transformation (alpha(2) -> gamma) in TiAl alloy occurred at the earlier stage of post-heat treatment, and the dendritic structure transformed firstly at the intergranular, then expanded into the transgranular, finally changed to ultrafine equiaxed grain structure, at the same time, micro-hardness of laser-surface remelted gamma-TiAl based alloy had the corresponding change with the structural trans fori-nation. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：406 / 409
页数：4
相关论文
共 50 条
  • [31] Grain refinement of a TiAl alloy by heat treatment through near gamma transformation
    Yong Wang
    J. N. Wang
    Jie Yang
    Qiangfei Xia
    Journal of Materials Science, 2001, 36 : 4465 - 4468
  • [32] Post-heat treatment microstructural changes in nickel based HVOF coating
    Rodriguez, MA
    Gil, L
    Staia, MH
    SURFACE ENGINEERING, 2002, 18 (05) : 358 - 362
  • [33] Metastable to stable phase transformation in atmospheric plasma sprayed Yb-silicate coating during post-heat treatment
    Bakan, Emine
    Sohn, Yoo Jung
    Vassen, Robert
    SCRIPTA MATERIALIA, 2023, 225
  • [34] Post-heat treatment design for high-strength low-alloy steels processed by laser powder bed fusion
    Sridar, Soumya
    Zhao, Yunhao
    Li, Kun
    Wang, Xin
    Xiong, Wei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 788
  • [35] Evaporation of Al and microstructural variation in TiAl alloy during heat treatment
    Xia, QF
    Wang, JN
    Yang, J
    Wang, Y
    MATERIALS SCIENCE AND TECHNOLOGY, 2001, 17 (11) : 1417 - 1422
  • [36] Microstructural instability of a TiAl-based alloy during rapid heating cyclic heat treatment
    Peng, Chaoqun
    Huang, Baiyun
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2004, 33 (04): : 363 - 367
  • [37] Microstructural instability of a TiAl-based alloy during rapid heating cyclic heat treatment
    Peng, CQ
    Huang, BY
    RARE METAL MATERIALS AND ENGINEERING, 2004, 33 (04) : 363 - 367
  • [38] Microstructural evolution during post-heat treatment and its effect on the mechanical properties of directed energy deposited near β titanium alloy
    Huang, Shilei
    Ming, Xianliang
    Hu, Yunlong
    Zhang, Qiang
    Tang, Ye
    Zhang, Siyu
    Chen, Weimin
    Lin, Xin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 934
  • [39] Microstructural Characterization of a Laser Surface Remelted Cu-Based Shape Memory Alloy
    da Silva, Murillo Romero
    Gargarella, Piter
    Wolf, Witor
    Gustmann, Tobias
    Kiminami, Claudio Shyinti
    Pauly, Simon
    Eckert, Juergen
    Bolfarini, Claudemiro
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2018, 21 (03):
  • [40] Analysis of phase, microstructure, and mechanical characteristics of selective laser melted AlSi10Mg alloy after post-heat treatment
    Charan, B. Sai
    Srikanth, M.
    Swamy, S.
    Ravi, K. R.
    Pattanayak, Deepak K.
    PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (01) : 593 - 604
12345