Dendritic structural transformation of laser surface remelted γ-TiAl based alloy during post-heat treatment

被引:6
|
作者
Wu, GQ
Luo, GX
Huang, Z
Ruan, ZJ
机构
[1] Beijing Univ Aeronaut & Astronaut, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
[2] Huazhong Univ Sci & Technol, State Key Lab Laser Technol, Wuhan, Peoples R China
基金
中国国家自然科学基金;
关键词
TiAl based alloy; laser processing; heat treatment; hardness; microstructure;
D O I
10.1016/j.matlet.2005.09.001
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Laser surface remelting followed by heat treatments at 1000 degrees C for different time was carried out on gamma-TiAl based alloy. The characteristics of structural transformation of laser surface remelted gamma-TiAl based alloy were investigated by high-temperature microscope, TEM and XRD. The results show that the phase transformation (alpha(2) -> gamma) in TiAl alloy occurred at the earlier stage of post-heat treatment, and the dendritic structure transformed firstly at the intergranular, then expanded into the transgranular, finally changed to ultrafine equiaxed grain structure, at the same time, micro-hardness of laser-surface remelted gamma-TiAl based alloy had the corresponding change with the structural trans fori-nation. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:406 / 409
页数:4
相关论文
共 50 条
  • [1] Transformation of laser surface melted TiAl intermetallic alloy during annealing treatment
    Wu, Guoqing
    Huang, Zheng
    Lin, Jianguo
    Yu, Gengsheng
    Ruan, Zhongjian
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2002, 16 (04): : 385 - 388
  • [2] Quantitative analysis on microstructure characteristic of pre-strained β-solidified TiAl alloy during post-heat treatment
    Qiang, Fengming
    Wu, Xinyu
    Yu, Yonghao
    Cai, Meina
    Wang, Wen
    Li, Lulu
    Liu, Yi
    Cai, Jun
    Kou, Hongchao
    Wang, Kuaishe
    VACUUM, 2024, 230
  • [3] Weldability and microstructure of laser-surface-remelted TiAl intermetallic alloy
    Wu, GQ
    Huang, Z
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 345 (1-2): : 286 - 292
  • [4] Microstructure and wear resistance of laser remelted ceramic coatings on TiAl alloy surface
    Tian, Zongjun
    Wang, Dongsheng
    Shen, Lida
    Huang, Yinhui
    Liu, Zhidong
    Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics, 2009, 41 (03): : 348 - 353
  • [5] The effect of post-heat treatment of laser surface melted AISI 1018 steel
    Akkurt, AS
    Akgun, OV
    Yakupoglu, N
    JOURNAL OF MATERIALS SCIENCE, 1996, 31 (18) : 4907 - 4911
  • [6] Laser surface melting and post-heat treatment of AISI 420 stainless tool steel
    Colaco, R
    Vilar, R
    SURFACE MODIFICATION TECHNOLOGIES XI, 1998, : 600 - 606
  • [7] Attaining superhydrophobic and superoleophilic bronze surface by picosecond laser texturing and post-heat treatment
    Jiang, Chao
    Zhang, Wei
    Wang, Mingyou
    Sun, Tengfei
    Zhang, Xiuli
    Wu, Yongling
    Zheng, Hongyu
    OPTICS AND LASER TECHNOLOGY, 2024, 177
  • [8] Achieving high strength in a laser powder bed fused FeCoNiAlTaB alloy through post-heat treatment
    Sun, Qinyao
    Du, Dafan
    Dong, Anping
    Li, Zhongjie
    Xiong, Lianghua
    Zhang, Cheng
    Sun, Baode
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 908
  • [9] Grain boundary character distribution in the CoCrMo alloy processed by selective laser melting and post-heat treatment
    Haoqing Li
    Shuai Shao
    Xuepeng Ren
    Hong Guo
    Dianjun Lou
    Weilong Xia
    Xiaoying Fang
    Journal of Materials Science, 2020, 55 : 16780 - 16790
  • [10] Grain boundary character distribution in the CoCrMo alloy processed by selective laser melting and post-heat treatment
    Li, Haoqing
    Shao, Shuai
    Ren, Xuepeng
    Guo, Hong
    Lou, Dianjun
    Xia, Weilong
    Fang, Xiaoying
    JOURNAL OF MATERIALS SCIENCE, 2020, 55 (35) : 16780 - 16790