Investigations on shear capacity of steel plates with local opening

被引：11

作者：

Zhao, Zhongwei ^{[1
]}

Zhang, Mengzhou ^{[1
]}

Gao, Youran ^{[1
]}

Sun, Qingwei ^{[1
]}

机构：

[1] Liaoning Tech Univ, Sch Civil Engn, Fuxin 123000, Peoples R China

来源：

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH | 2021年 / 179卷

基金：

中国博士后科学基金;

关键词：

Shear capacity; Steel plate with opening; Opening shape; Opening position; Mass loss ratio;

D O I：

10.1016/j.jcsr.2020.106518

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Steel plates with opening have been widely used in various structures, including buildings, bridges, ocean platforms, and industrial equipment. In addition, corrosion can cause an opening on the surface of steel panels. The shear capacity of steel panels is the most important performance utilized by steel structures, such as the steel plate shear wall. This capacity can be significantly deteriorated by these openings. Hence, this study investigated the shear capacity of steel panels with multiple openings. The influence of opening position and shape, panel thickness, and material strength were evaluated. An analytical method for predicting the shear capacity of panels with multiple openings was proposed. The accuracy of the proposed method was validated by experimental and numerical results. (c) 2020 Elsevier Ltd. All rights reserved.

引用

页数：13

共 50 条

[41] Local buckling of steel plates at elevated temperatures
Wong, MB
Tan, KH
MECHANICS OF STRUCTURES AND MATERIALS, 1999, : 467 - 471
[42] Local buckling of stainless steel plates in fire
Xing, Zhe
Kucukler, Merih
Gardner, Leroy
THIN-WALLED STRUCTURES, 2020, 148 (148)
[43] Experimental and numerical investigations of the effectiveness of engineered cementitious composites and stainless steel plates in shear strengthening of reinforced concrete beams
Hamoda, Ahmed
Ahmed, Mizan
Sennah, Khaled
STRUCTURAL CONCRETE, 2023, 24 (02) : 2778 - 2799
[44] Experimental and numerical investigation on the seismic performance of RC squat shear walls with single post-opening reinforced by steel plates
Liu, Meng
Yuan, Guanglin
Sun, Wen
Shu, Qianjin
Zhao, Zhiyuan
Lu, Limin
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING, 2024, 28 (01) : 53 - 79
[45] POSTBUCKLING SHEAR CAPACITY OF THIN STEEL TUBES
ROMAN, VG
ELWI, AE
JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 1988, 114 (11): : 2511 - 2523
[46] SHEAR CAPACITY OF SIMPLE SUPPORTED RC BEAM WITH WEB OPENING
Cai, Jian
Hou, Lei
Yang, Chun
ISISS '2009: INNOVATION & SUSTAINABILITY OF STRUCTURES, VOLS 1 AND 2, 2009, : 542 - 546
[47] Shear resistent mechanism analysis of the ultimate bearing capacity of RC shear walls with an opening
Zhang, Dachang
Chen, Huailiang
Lu, Zhongqiang
Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2008, 41 (11): : 44 - 50
[48] Investigations in the static shear capacity of small-scaled pin shear connectors
Kopp, Maik
Feldmann, Markus
Classen, Martin
Hegger, Josef
Schaefer, Johannes
Reisgen, Uwe
STAHLBAU, 2016, 85 (03) : 200 - 206
[49] Experimental and theoretical investigations on axial bearing capacity of steel angle members with local corrosion on their limb peaks
Luo, Zhicheng
Li, Qiyu
Xu, Congbai
Hu, Hao
Zhang, Dachang
Han, Xingning
CONSTRUCTION AND BUILDING MATERIALS, 2023, 363
[50] Numerical and experimental investigation of composite steel shear wall with opening
Arabzadeh, Abolfazl
Korrani, Hamid Reza Kazemi Nia
INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 2017, 17 (04) : 1379 - 1389

← 1 2 3 4 5 →