Investigations on shear capacity of steel plates with local opening

被引：11

作者：

Zhao, Zhongwei ^{[1
]}

Zhang, Mengzhou ^{[1
]}

Gao, Youran ^{[1
]}

Sun, Qingwei ^{[1
]}

机构：

[1] Liaoning Tech Univ, Sch Civil Engn, Fuxin 123000, Peoples R China

来源：

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH | 2021年 / 179卷

基金：

中国博士后科学基金;

关键词：

Shear capacity; Steel plate with opening; Opening shape; Opening position; Mass loss ratio;

D O I：

10.1016/j.jcsr.2020.106518

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Steel plates with opening have been widely used in various structures, including buildings, bridges, ocean platforms, and industrial equipment. In addition, corrosion can cause an opening on the surface of steel panels. The shear capacity of steel panels is the most important performance utilized by steel structures, such as the steel plate shear wall. This capacity can be significantly deteriorated by these openings. Hence, this study investigated the shear capacity of steel panels with multiple openings. The influence of opening position and shape, panel thickness, and material strength were evaluated. An analytical method for predicting the shear capacity of panels with multiple openings was proposed. The accuracy of the proposed method was validated by experimental and numerical results. (c) 2020 Elsevier Ltd. All rights reserved.

引用

页数：13

共 50 条

[31] Investigations on arc brazing for galvanized heavy steel plates in steel and shipbuilding
Philipp Andreazza
Andreas Gericke
Knuth-Michael Henkel
Welding in the World, 2021, 65 : 1199 - 1210
[32] Investigations on arc brazing for galvanized heavy steel plates in steel and shipbuilding
Andreazza, Philipp
Gericke, Andreas
Henkel, Knuth-Michael
WELDING IN THE WORLD, 2021, 65 (06) : 1199 - 1210
[33] Calculation of shear capacity of shear connector in steel column base
Xiao, Nan
Li, Sha
Zhao, Wenzheng
Jianzhu Jiegou Xuebao/Journal of Building Structures, 2010, 31 (07): : 86 - 93
[34] Analytical Study on Shear Capacity of Steel I-Girders with Local Corrosion nearby Supports
Liu, C.
Miyashita, T.
Nagai, M.
PROCEEDINGS OF THE TWELFTH EAST ASIA-PACIFIC CONFERENCE ON STRUCTURAL ENGINEERING AND CONSTRUCTION (EASEC12), 2011, 14
[35] Effect of Shear Reinforcement on Punching Shear Capacity of Reinforced Concrete Flat Plates
Mohamed, Osama
Khattab, Rania
5TH WORLD MULTIDISCIPLINARY CIVIL ENGINEERING-ARCHITECTURE-URBAN PLANNING SYMPOSIUM (WMCAUS), 2020, 960
[36] Effect of edge distance on shear friction capacity of steel plates anchored with reinforcing bars in comparison with headed bolts
Sabra, Tarek S.
Ibrahim, Hatem Hassan
CANADIAN JOURNAL OF CIVIL ENGINEERING, 2019, 46 (08) : 742 - 758
[37] Influence of the arrangement of the punching shear and composite reinforcement made of L steel plates on the load- bearing capacity
Guenther, Gerd
Cramer, Joerg
Heller, Kevin
BETON- UND STAHLBETONBAU, 2023, 118 (06) : 427 - 436
[38] Shear strength degradation of steel plate shear walls with optional located opening
Afshari, Mohammad Jalilzadeh
Gholhaki, Majid
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2018, 18 (04) : 1547 - 1561
[39] Shear buckling coefficient: proposal for tapered steel plates
Bedynek, Agnieszka
Real, Esther
Mirambell, Enrique
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 2014, 167 (04) : 243 - 252
[40] Experimental Investigations on Moment Redistribution and Punching Shear of Flat Plates
Choi, Jung-Wook
Kim, Jang-Ho Jay
ACI STRUCTURAL JOURNAL, 2012, 109 (03) : 329 - 337

← 1 2 3 4 5 →