Influence of Rotor Tip Blockage on Near Stall Blade Vibrations in an Axial Compressor Rig

被引：15

作者：

Moeller, Daniel ^{[1
]}

Juengst, Maximilian ^{[1
]}

Schiffer, Heinz-Peter ^{[1
]}

Giersch, Thomas ^{[2
]}

Heinichen, Frank ^{[2
]}

机构：

[1] Tech Univ Darmstadt, Inst Gas Turbines & Aerosp Prop, D-64287 Darmstadt, Germany

[2] Rolls Royce Deutschland, D-15827 Blankenfelde Mahlow, Germany

来源：

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME | 2018年 / 140卷 / 02期

关键词：

INTEGRATED NONLINEAR APPROACH; FORCED RESPONSE PREDICTION;

D O I：

10.1115/1.4038316

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Rotor blade vibrations observed in the Darmstadt transonic compressor rig are investigated in this paper. The vibrations are nonsynchronous and occur in the near stall (NS) operating region. Rotor tip flow fluctuations traveling near the leading edge (LE) against the direction of rotation (in the rotor relative frame of reference) with about 50% blade tip speed are found to be the reason for the occurrence of the vibrations. The investigations show that the blockage at the rotor tip is an important factor for the aeroelastic stability of the compressor in the NS region. It is found that by application of a recirculating tip injection (TI) casing treatment, the aeroelastic stability increases as a result of reduced blockage in the rotor tip region.

引用

页数：12

共 50 条

[41] Influence of blade tip winglet on the off-design performance of a transonic compressor rotor
Han S.-B.
Zhong J.-J.
Hangkong Dongli Xuebao/Journal of Aerospace Power, 2016, 31 (03): : 647 - 658
[42] A research on the compressor blade tip pressure modeling and stall detection measure
Sun, Fengyong
Zhang, Haibo
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2016, 230 (14) : 2654 - 2660
[43] Computational fluid dynamics simulations of blade damage effect on the performance of a transonic axial compressor near stall
Li, Yan-Ling
Sayma, Abdulnaser I.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2015, 229 (12) : 2242 - 2260
[44] DYNAMIC CHARACTERIZATION AND IDENTIFICATION OF FLOW IN A BLADE PASSAGE IN NEAR-STALL CONDITIONS OF AXIAL COMPRESSOR SYSTEMS
Aung, Eighdi
Schoen, Marco P.
Li, Jichao
PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 6, 2019,
[45] FORCED VIBRATIONS OF A SINGLE STAGE AXIAL COMPRESSOR ROTOR
FABUNMI, JA
JOURNAL OF ENGINEERING FOR POWER-TRANSACTIONS OF THE ASME, 1980, 102 (02): : 322 - 328
[46] Mechanism of Effects of Rotor Blade Tip Jet Slot on Performance and Flow Structure of Transonic Axial Compressor
Gao, Tian-Yi
Zhang, Guo-Chen
Xu, Zhi-Hui
Liu, Peng-Cheng
Tuijin Jishu/Journal of Propulsion Technology, 2022, 43 (03):
[47] Effects of casing treatment on behavior of tip leakage flow in an isolated axial compressor rotor blade row
Taghavi-Zenouz, Reza
Eslami, Siamak
JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, 2013, 36 (07) : 819 - 830
[48] The Influence of Tip Clearance Momentum Flux on Stall Inception in a High-Speed Axial Compressor
Cameron, Joshua D.
Bennington, Matthew A.
Ross, Mark H.
Morris, Scott C.
Du, Juan
Lin, Feng
Chen, Jingyi
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2013, 135 (05):
[49] Influence of blade tip clearance shapes on aerodynamic performance of an axial flow compressor stator
Wang, Z
Jia, X
Cai, R
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2002, 216 (A5) : 395 - 401
[50] Investigation on the influence of the structure parameters of blade tip recess on the performance of axial flow compressor
Yan, Song
Chu, WuLi
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2021, 235 (16) : 2436 - 2450

← 1 2 3 4 5 →