Influence of Rotor Tip Blockage on Near Stall Blade Vibrations in an Axial Compressor Rig

被引：15

作者：

Moeller, Daniel ^{[1
]}

Juengst, Maximilian ^{[1
]}

Schiffer, Heinz-Peter ^{[1
]}

Giersch, Thomas ^{[2
]}

Heinichen, Frank ^{[2
]}

机构：

[1] Tech Univ Darmstadt, Inst Gas Turbines & Aerosp Prop, D-64287 Darmstadt, Germany

[2] Rolls Royce Deutschland, D-15827 Blankenfelde Mahlow, Germany

来源：

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME | 2018年 / 140卷 / 02期

关键词：

INTEGRATED NONLINEAR APPROACH; FORCED RESPONSE PREDICTION;

D O I：

10.1115/1.4038316

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Rotor blade vibrations observed in the Darmstadt transonic compressor rig are investigated in this paper. The vibrations are nonsynchronous and occur in the near stall (NS) operating region. Rotor tip flow fluctuations traveling near the leading edge (LE) against the direction of rotation (in the rotor relative frame of reference) with about 50% blade tip speed are found to be the reason for the occurrence of the vibrations. The investigations show that the blockage at the rotor tip is an important factor for the aeroelastic stability of the compressor in the NS region. It is found that by application of a recirculating tip injection (TI) casing treatment, the aeroelastic stability increases as a result of reduced blockage in the rotor tip region.

引用

页数：12

共 50 条

[31] Influence of Blade Tip Winglet Combined With Tip Groove on the Leakage Flow of Transonic Compressor Rotor
Han, Shaobing
Zhao, Ao
Zhao, Yuzhou
Zhong, Jingjun
Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2022, 43 (07): : 1859 - 1869
[32] Development of hub corner stall and its influence on the performance of axial compressor blade rows
Hah, C.
Loellbach, J.
Journal of Turbomachinery, 1999, 121 (01): : 67 - 77
[33] Development of hub corner stall and its influence on the performance of axial compressor blade rows
Hah, C
Loellbach, J
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1999, 121 (01): : 67 - 77
[34] STALL INCEPTION AND DEVELOPMENT PROCESS DUE TO TIP LEAKAGE FLOW IN AXIAL COMPRESSOR ROTOR BLADES ROW
Taghavi-Zenou, R.
Abbasi, S.
Eslami, S.
JOURNAL OF MECHANICS, 2014, 30 (03) : 307 - 313
[35] INFLUENCE OF LOCAL SURFACE ROUGHNESS OF A ROTOR BLADE ON PERFORMANCE OF AN AXIAL COMPRESSOR STAGE
Chen, Shaowen
Sun, Shijun
Xu, Hao
Zhang, Longxin
Wang, Songtao
Zhang, Tian
PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2013, VOL 6A, 2013,
[36] Experimental Investigation of Dynamic Stall on a Pitching Rotor Blade Tip
Merz, Christoph B.
Wolf, C. Christian
Richter, Kai
Kaufmann, Kurt
Raffel, Markus
NEW RESULTS IN NUMERICAL AND EXPERIMENTAL FLUID MECHANICS X, 2016, 132 : 339 - 348
[37] A model governing the stall characteristics of an isolated axial compressor rotor
Canbazoglu, S
Yilbas, BS
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 2005, 77 (02): : 142 - 147
[38] Experimental investigation of unsteady flow field in the tip region of an axial compressor rotor passage at near stall condition with stereoscopic particle image velocimetry
Liu, BJ
Wang, HW
Liu, HX
Yu, HJ
Jiang, HK
Chen, MZ
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2004, 126 (03): : 360 - 374
[39] Optimization of blade sweep in a transonic axial compressor rotor
Jang, CM
Li, P
Kim, KY
JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 2005, 48 (04) : 793 - 801
[40] Sweep optimization on a transonic rotor blade of an axial compressor
National Key Lab. on Aero-Engine, School of Jet Propulsion, Beihang University, Beijing 100083, China
Kung Cheng Je Wu Li Hsueh Pao, 2007, SUPPL. 1 (109-112):

← 1 2 3 4 5 →