Study on Six Degrees of Freedom Arc Welding Robot Trajectory Based on SolidWorks

被引：0

作者：

Liu, Zhanqi ^{[1
]}

Zhang, Wenming ^{[1
]}

机构：

[1] Shenyang Univ, Shenyang, Peoples R China

来源：

PROCEEDINGS OF THE 2016 INTERNATIONAL FORUM ON ENERGY, ENVIRONMENT AND SUSTAINABLE DEVELOPMENT (IFEESD) | 2016年 / 75卷

关键词：

SolidWorks; Arc welding robot; Saddle shape;

D O I：

暂无

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

Three- dimensional (3D) saddle shape model is built by using SolidWorks software in this paper. Then import the saddle model into a robot off-line programming system. Finally, the simulation study of the SIASUN robot off-line programming system can be used after collecting the saddle model and saving the recognized data type of the robot. Singularities can appear during the period of simulation study. These singularities can disappear after continually adapting the data of saddle model and finally run the predefined program. The robot can be seen moving based on the predefined route within the simulation software interface.

引用

页码：372 / 376

页数：5

共 50 条

[31] The Manipulator of Six Degrees of Freedom Design Based on VB
Sun Ya-ning
Xiong Yao
[J]. NATIONAL CONFERENCE OF HIGHER VOCATIONAL AND TECHNICAL EDUCATION ON COMPUTER INFORMATION, 2010, : 230 - 233
[32] Research on Kinematic Trajectory Simulation System of KUKA Arc Welding Robot System
Hu, Min
[J]. 2017 INTERNATIONAL CONFERENCE ON STRUCTURAL, MECHANICAL AND MATERIALS ENGINEERING (ICSMME 2017), 2017, 248
[33] Modelling and Simulation Using Mathematical and CAD Model of a Robot with Six Degrees of Freedom
Ghozlane, Wafa
Knani, Jilani
[J]. 2016 4TH INTERNATIONAL CONFERENCE ON CONTROL ENGINEERING & INFORMATION TECHNOLOGY (CEIT), 2016,
[34] Double circular-triangular six-degrees-of-freedom parallel robot
Brodsky, V
Glozman, D
Shoham, M
[J]. ADVANCES IN ROBOT KINEMATICS: ANALYSIS AND CONTROL, 1998, : 155 - 164
[35] Solution of forward kinematics model of six degrees of freedom parallel robot manipulator
Arshad, M
Khan, TM
Choudhry, MA
[J]. IEEE: 2005 INTERNATIONAL CONFERENCE ON EMERGING TECHNOLOGIES, PROCEEDINGS, 2005, : 393 - 398
[36] A new configuration of a six degrees-of-freedom parallel robot for MEMS fabrication
Bamberger, H
Shoham, M
[J]. 2004 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1- 5, PROCEEDINGS, 2004, : 4545 - 4550
[37] Welding Trajectory Planning of Beam Welding Robot Based on Computer Simulation
Duan Zhiqun
Meng Xiaojing
[J]. PROCEEDINGS OF THE 2015 2ND INTERNATIONAL CONFERENCE ON ELECTRICAL, COMPUTER ENGINEERING AND ELECTRONICS (ICECEE 2015), 2015, 24 : 1073 - 1078
[38] An innovative forming method based on an arc welding robot
Zhu, S.
Liu, J.
Yin, F. -L.
Meng, F. -J.
Chang, T. -Q.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 84 (5-8): : 1531 - 1538
[39] An innovative forming method based on an arc welding robot
S. Zhu
J. Liu
F.-L. Yin
F.-J. Meng
T.-Q. Chang
[J]. The International Journal of Advanced Manufacturing Technology, 2016, 84 : 1531 - 1538
[40] OPTIMISATION OF A SIX-DEGREE-OF-FREEDOM ROBOT TRAJECTORY BASED ON IMPROVED MULTI-OBJECTIVE PSO ALGORITHM
He, Zhengyang
Tang, Xiaojie
Shen, Qin
Duan, Chenxu
Jia, Chengfen
[J]. INTERNATIONAL JOURNAL OF ROBOTICS & AUTOMATION, 2023, 38 (03): : 218 - 230

← 1 2 3 4 5 →