Effects of stress ratio on crack growth rate and fatigue strength for high cycle and very-high-cycle fatigue of metallic materials

被引：36

作者：

Sun, Chengqi ^{[1
]}

Lei, Zhengqiang ^{[1
]}

Hong, Youshi ^{[1
]}

机构：

[1] Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China

来源：

MECHANICS OF MATERIALS | 2014年 / 69卷 / 01期

基金：

中国国家自然科学基金;

关键词：

Stress ratio; Crack growth rate; Fatigue strength; Very-high-cycle fatigue; Metallic materials; DRIVING-FORCE PARAMETER; LOAD RATIO; PROPAGATION BEHAVIOR; STEELS; LIFE; PREDICTION; MECHANISMS; THRESHOLD; FAILURE; CLOSURE;

D O I：

10.1016/j.mechmat.2013.10.007

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper studies the effects of stress ratio R on crack growth rate and fatigue strength for high cycle and very-high-cycle fatigue of metallic materials. First, the effect of R on fatigue crack growth rate is analyzed, and the result shows that the effect of R on crack growth rate at near-threshold region and on Paris region is well expressed by a unified relation. Then, a model is developed for describing the fatigue crack growth rate with the effect of R in near-threshold region and Paris region. The model is verified by experimental data of metallic materials in literature. Finally, a formula is derived for the effect of R on fatigue strength. The estimated results are in good agreement with the experimental data for high cycle and very-high-cycle fatigue regime in literature. The comparison of the present result with Goodman diagram is also discussed. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：227 / 236

页数：10

共 50 条

[21] Very high cycle fatigue strength and crack growth of thin steel sheets
Ouarabi, Mohand
Mora, Ruben Perez
Bathias, Claude
Palin-Luc, Thierry
FRATTURA ED INTEGRITA STRUTTURALE, 2016, 10 (36): : 112 - 118
[22] Effects of stress ratio on high-cycle and very-high-cycle fatigue behavior of a Ti-6Al-4V alloy
Liu, Xiaolong
Sun, Chengqi
Hong, Youshi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 622 : 228 - 235
[23] A probabilistic model on crack initiation modes of metallic materials in very high cycle fatigue
Nakagawa, Akiyoshi
Sakai, Tatsuo
Harlow, D. Gary
Oguma, Noriyasu
Nakamura, Yuki
Ueno, Akira
Kikuchi, Shoichi
Sakaida, Akiyoshi
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 1199 - 1206
[24] High cycle and very high cycle fatigue of TC17 titanium alloy: Stress ratio effect and fatigue strength modeling
Li, Gen
Ke, Lei
Ren, Xuechong
Sun, Chengqi
INTERNATIONAL JOURNAL OF FATIGUE, 2023, 166
[25] A cumulative damage model for fatigue life estimation of high-strength steels in high-cycle and very-high-cycle fatigue regimes
Sun, C.
Xie, J.
Zhao, A.
Lei, Z.
Hong, Y.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2012, 35 (07) : 638 - 647
[26] Faceted crack initiation characteristics for high-cycle and very-high-cycle fatigue of a titanium alloy under different stress ratios
Liu, Xiaolong
Sun, Chengqi
Hong, Youshi
INTERNATIONAL JOURNAL OF FATIGUE, 2016, 92 : 434 - 441
[27] EFFECTS OF MICROSTRUCTURE AND STRESS RATIO ON HIGH-CYCLE AND VERY-HIGH-CYCLE FATIGUE BEHAVIOR OF Ti-6Al-4V ALLOY
Liu Xiaolong
Sun Chengqi
Zhou Yantian
Hong Youshi
ACTA METALLURGICA SINICA, 2016, 52 (08) : 923 - 930
[28] Propagation behaviour of microstructurally short fatigue cracks in the high-cycle- and very-high-cycle fatigue regimes
Krupp, Ulrich
Knobbe, Helge
Dueber, Olaf
Christ, Hans-Juergen
Koester, Philipp
Kuenkler, Boris
Fritzen, Claus-Peter
MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE V, 2008, 567-568 : 425 - +
[29] Fractography and crack initiation of very-high-cycle fatigue for a high carbon low alloy steel
Zhou, Cheng'en
Qian, Gui'an
Hong, Youshi
FRACTURE AND DAMAGE MECHANICS V, PTS 1 AND 2, 2006, 324-325 : 1113 - +
[30] Effects of strength level and loading frequency on very-high-cycle fatigue behavior for a bearing steel
Zhao, Aiguo
Xie, Jijia
Sun, Chengqi
Lei, Zhengqiang
Hong, Youshi
INTERNATIONAL JOURNAL OF FATIGUE, 2012, 38 : 46 - 56

← 1 2 3 4 5 →