Determination of stick-slip stage of single and multiple yarn ends pull-out in para-aramid (Kevlar®) woven fabric

被引：1

作者：

Bilisik, Kadir ^{[1
]}

机构：

[1] Erciyes Univ, Fac Engn, Dept Text Engn, TR-38039 Talas Kayseri, Turkey

来源：

JOURNAL OF INDUSTRIAL TEXTILES | 2013年 / 43卷 / 01期

关键词：

Ballistic fabrics; single and multiple yarn pull-outs; stick-slip force; accumulative retraction force; pull-out fixture; BALLISTIC IMPACT ENERGY; FRICTION; MECHANISM;

D O I：

10.1177/1528083712447312

中图分类号：

TB3 [工程材料学]; TS1 [纺织工业、染整工业];

学科分类号：

0805 ; 080502 ; 0821 ;

摘要：

The aim of this study was to understand the stick-slip properties of para-aramid woven fabrics. For this reasons, pull-out test was conducted on para-aramid Kevlar (R) 29 and Kevlar (R) 129 woven fabrics. The force-displacement curve from each fabric sample was obtained. The stick-slip region and accumulative retraction force region were defined based on the force-displacement curve. It was found that stick-slip and accumulative retraction forces depend on fabric density and the number of pulled ends in the fabric. Stick-slip and accumulative retraction forces in the multiple yarn pull-out test were higher than those of the single yarn pull-out test. Stick-slip and accumulative retraction forces in single and multiple yarn pull-out tests in the dense K29 fabric were higher than those of the loose K129 fabric. In addition, long fabric samples showed high stick-slip force compared to that of the short fabric samples.

引用

页码：90 / 115

页数：26