Determination of stick-slip stage of single and multiple yarn ends pull-out in para-aramid (Kevlar®) woven fabric

被引：1

作者：

Bilisik, Kadir ^{[1
]}

机构：

[1] Erciyes Univ, Fac Engn, Dept Text Engn, TR-38039 Talas Kayseri, Turkey

来源：

JOURNAL OF INDUSTRIAL TEXTILES | 2013年 / 43卷 / 01期

关键词：

Ballistic fabrics; single and multiple yarn pull-outs; stick-slip force; accumulative retraction force; pull-out fixture; BALLISTIC IMPACT ENERGY; FRICTION; MECHANISM;

D O I：

10.1177/1528083712447312

中图分类号：

TB3 [工程材料学]; TS1 [纺织工业、染整工业];

学科分类号：

0805 ; 080502 ; 0821 ;

摘要：

The aim of this study was to understand the stick-slip properties of para-aramid woven fabrics. For this reasons, pull-out test was conducted on para-aramid Kevlar (R) 29 and Kevlar (R) 129 woven fabrics. The force-displacement curve from each fabric sample was obtained. The stick-slip region and accumulative retraction force region were defined based on the force-displacement curve. It was found that stick-slip and accumulative retraction forces depend on fabric density and the number of pulled ends in the fabric. Stick-slip and accumulative retraction forces in the multiple yarn pull-out test were higher than those of the single yarn pull-out test. Stick-slip and accumulative retraction forces in single and multiple yarn pull-out tests in the dense K29 fabric were higher than those of the loose K129 fabric. In addition, long fabric samples showed high stick-slip force compared to that of the short fabric samples.

引用

页码：90 / 115

页数：26

共 32 条

[21] Pull-Out Properties of Nano-Processed Para-Aramid Fabric Materials in Soft Ballistic: An Experimental Analysis
Bilisik, Nedim Erman
Erdogan, Gulhan
Bilisik, Kadir
APPLIED SCIENCES-BASEL, 2025, 15 (05):
[22] Yarn pull-out behavior of plain woven Kevlar fabrics: Effect of yarn sizing, pullout rate, and fabric pre-tension
Nilakantan, Gaurav
Gillespie, John W., Jr.
COMPOSITE STRUCTURES, 2013, 101 : 215 - 224
[23] Enhancement of Yarn Pull-Out Force of Para-Aramid Fabric at High Speed by Dispersion and Phenolic Anchoring of MWCNT on the Fiber Surfaces in the Presence of Surfactant and Ultrasonic Process
Cheon, Jinsil
Cho, Donghwan
MACROMOLECULAR RESEARCH, 2020, 28 (09) : 881 - 884
[24] Enhancement of Yarn Pull-Out Force of Para-Aramid Fabric at High Speed by Dispersion and Phenolic Anchoring of MWCNT on the Fiber Surfaces in the Presence of Surfactant and Ultrasonic Process
Jinsil Cheon
Donghwan Cho
Macromolecular Research, 2020, 28 : 881 - 884
[25] Multiple Yarn Pull-out Response on E-Glass Twill 4/1 Woven Fabric
Zulkifli, Nasrun Faris
Yahya, Faizul
Ahmad, Rozi
Abd Ghani, Suzaini
INTERNATIONAL TRANSACTION JOURNAL OF ENGINEERING MANAGEMENT & APPLIED SCIENCES & TECHNOLOGIES, 2021, 12 (09):
[26] Effect of interlacement frequency on the single and multiple yarn end pull-out properties of woven fabrics
Bilisik, Kadir
TEXTILE RESEARCH JOURNAL, 2011, 81 (06) : 585 - 597
[27] Multilayered and Multidirectionally-stitched aramid Woven Fabric Structures: Experimental Characterization of Ballistic Performance by Considering the Yarn Pull-out Test
Bilisik, K.
Korkmaz, M.
TEXTILE RESEARCH JOURNAL, 2010, 80 (16) : 1697 - 1720
[28] Determination of inter-yarn friction and its effect on ballistic response of para-aramid woven fabric under low velocity impact
Das, Sanhita
Jagan, S.
Shaw, Arnit
Pal, Anjali
COMPOSITE STRUCTURES, 2015, 120 : 129 - 140
[29] The synergetic effect of phenolic anchoring and multi-walled carbon nanotubes on the yarn pull-out force of para-aramid fabrics at high speed
Cheon, Jinsil
Yoon, Byung Il
Cho, Donghwan
CARBON LETTERS, 2018, 26 (01) : 107 - 111
[30] Pull-out Properties of Polyester Woven Fabrics: Effects of Softening Agent and Interlacement on Single and Multiple Yarn Pull-Out Forces and Analysis by Statistical Model
Bilisik, Kadir
FIBERS AND POLYMERS, 2011, 12 (08) : 1106 - 1118

← 1 2 3 4 →