Experimental Investigation of Using Sandwich Panels as Infill Plate in a Steel Plate Shear Wall

被引:2
|
作者
Dusak, Said [1 ]
Yalcin, Cem [2 ]
Yelgin, Ahmet Necati [3 ]
机构
[1] Sakarya Univ, Inst Nat Sci, Sakarya, Turkey
[2] Bogazici Univ, Dept Civil Engn, Istanbul, Turkey
[3] Sakarya Univ, Dept Civil Engn, Sakarya, Turkey
来源
TEKNIK DERGI | 2020年 / 31卷 / 06期
关键词
Steel plate shear wall; infill steel frame; sandwich panel; composite panel shear wall; cyclic loading; energy dissipation; LIGHT-GAUGE;
D O I
10.18400/tekderg.559036
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
A total of five steel frame specimens, one bare and four infilled, were designed with thin-walled steel sheets and corrugated sandwich infill panels in order to increase their load and energy dissipation capacity. For this experimental study, single-story, single-bay steel frames of nominally-pinned beam-to-column connections were prepared with a scale ratio of 1:3. A quasi-static cyclic loading pattern was applied to the control bare and infilled steel frames, and their behavior was investigated both experimentally and analytically using SAP2000 and ABAQUS finite element software. First, five identical bare steel frame specimens were prepared and one of them was tested as a control specimen, and its rigidity and cyclic behavior was determined experimentally. Then, two sandwich panel specimens were prepared by connecting sandwich panels in the second and third bare steel frames using appropriate connections. The fourth specimen had only a single steel plate infill. Finally, the fifth specimen was prepared by removing the polyurethane material from inside the sandwich panel and only steel plates were attached to both faces of the frame. This way, it was possible to compare the effect of the polyurethane material inside the sandwich panel and the corrugated steel plate on the overall system behavior. In all specimens, the infill plates were fastened to the frame connection profiles using self-drilling screws and the responses of the specimens were compared in terms of their maximum load capacity, initial stiffness, ductility and energy dissipation capacity values under cyclic loading. The experimental and analytical investigations showed that, similarly to steel plate infills, the specimens with sandwich panels also behaved in a ductile manner with relatively lower load and energy dissipation capacities. Results of the strip model and the finite element model analyses were then compared with the experimental results and they were both found to be in good agreement.
引用
收藏
页码:10413 / 10439
页数:27
相关论文
共 50 条
  • [41] Effect of Outrigger Panels on Seismic Performance of Steel Plate Shear Wall Structural System
    Vasseghi, Akbar
    Khoshkalam, Vahid
    INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 2020, 20 (04) : 1180 - 1192
  • [42] Effect of Outrigger Panels on Seismic Performance of Steel Plate Shear Wall Structural System
    Akbar Vasseghi
    Vahid Khoshkalam
    International Journal of Steel Structures, 2020, 20 : 1180 - 1192
  • [43] Experimental investigation and finite element analysis of flexural behavior of insulated concrete sandwich panels with FRP plate shear connectors
    Chen, An
    Norris, Thomas G.
    Hopkins, Paul M.
    Yossef, Mostafa
    ENGINEERING STRUCTURES, 2015, 98 : 95 - 108
  • [44] Experimental and numerical study of unstiffened steel plate shear wall structures
    Wang, Meng
    Shi, Yongjiu
    Xu, Jian
    Yang, Weiguo
    Li, Yixin
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2015, 112 : 373 - 386
  • [45] Shear Resistance of Steel Plate Girder End Panels
    Durgesh R. Hingnekar
    Arvind Y. Vyavahare
    Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2023, 47 : 2311 - 2332
  • [46] Shear Resistance of Steel Plate Girder End Panels
    Hingnekar, Durgesh. R. R.
    Vyavahare, Arvind. Y. Y.
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, 2023, 47 (04) : 2311 - 2332
  • [47] Shear Strength of End Panels in Steel Plate Girders
    Kim, Dong-Won
    Uang, Chia-Ming
    JOURNAL OF STRUCTURAL ENGINEERING, 2021, 147 (06)
  • [48] Hysteresis Model of Thin Infill Plate for Cyclic Nonlinear Analysis of Steel Plate Shear Walls
    Choi, In-Rak
    Park, Hong-Gun
    JOURNAL OF STRUCTURAL ENGINEERING, 2010, 136 (11) : 1423 - 1434
  • [49] Cyclic tests and performance of weak-axis connected uncoupled and coupled steel plate shear wall with novel infill plate configuration
    Wu, Xinghuang
    Hao, Jiping
    Tian, Weifeng
    Li, Shenghui
    Wang, Rong
    THIN-WALLED STRUCTURES, 2022, 178
  • [50] Experimental determination of torsion and shear properties of sandwich panels and laminated composites by the plate twist test
    Aviles, F.
    Couoh-Solis, F.
    Carlsson, L. A.
    Hernandez-Perez, A.
    May-Pat, A.
    COMPOSITE STRUCTURES, 2011, 93 (07) : 1923 - 1928