Experimental Investigation of Using Sandwich Panels as Infill Plate in a Steel Plate Shear Wall

被引:2
|
作者
Dusak, Said [1 ]
Yalcin, Cem [2 ]
Yelgin, Ahmet Necati [3 ]
机构
[1] Sakarya Univ, Inst Nat Sci, Sakarya, Turkey
[2] Bogazici Univ, Dept Civil Engn, Istanbul, Turkey
[3] Sakarya Univ, Dept Civil Engn, Sakarya, Turkey
来源
TEKNIK DERGI | 2020年 / 31卷 / 06期
关键词
Steel plate shear wall; infill steel frame; sandwich panel; composite panel shear wall; cyclic loading; energy dissipation; LIGHT-GAUGE;
D O I
10.18400/tekderg.559036
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
A total of five steel frame specimens, one bare and four infilled, were designed with thin-walled steel sheets and corrugated sandwich infill panels in order to increase their load and energy dissipation capacity. For this experimental study, single-story, single-bay steel frames of nominally-pinned beam-to-column connections were prepared with a scale ratio of 1:3. A quasi-static cyclic loading pattern was applied to the control bare and infilled steel frames, and their behavior was investigated both experimentally and analytically using SAP2000 and ABAQUS finite element software. First, five identical bare steel frame specimens were prepared and one of them was tested as a control specimen, and its rigidity and cyclic behavior was determined experimentally. Then, two sandwich panel specimens were prepared by connecting sandwich panels in the second and third bare steel frames using appropriate connections. The fourth specimen had only a single steel plate infill. Finally, the fifth specimen was prepared by removing the polyurethane material from inside the sandwich panel and only steel plates were attached to both faces of the frame. This way, it was possible to compare the effect of the polyurethane material inside the sandwich panel and the corrugated steel plate on the overall system behavior. In all specimens, the infill plates were fastened to the frame connection profiles using self-drilling screws and the responses of the specimens were compared in terms of their maximum load capacity, initial stiffness, ductility and energy dissipation capacity values under cyclic loading. The experimental and analytical investigations showed that, similarly to steel plate infills, the specimens with sandwich panels also behaved in a ductile manner with relatively lower load and energy dissipation capacities. Results of the strip model and the finite element model analyses were then compared with the experimental results and they were both found to be in good agreement.
引用
收藏
页码:10413 / 10439
页数:27
相关论文
共 50 条
  • [31] Experimental Study of Composite Steel Plate Shear Wall with Flush End-Plate Connection
    Yu, JinGuang
    Feng, Xiao-Tian
    Hao, Ji-Ping
    Gao, Xi
    INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 2020, 20 (01) : 136 - 155
  • [32] Experimental and numerical investigation into hysteretic performance of orthogonal double corrugated steel plate shear wall
    Zhu, Bo-Li
    Bai, Wen-Hua
    Wen, Chen-Bao
    Zuo, Jia-Qi
    Sun, Hao-Jun
    Wang, Xiong
    Guo, Yan-Lin
    THIN-WALLED STRUCTURES, 2024, 195
  • [33] Experimental Study of Composite Steel Plate Shear Wall with Flush End-Plate Connection
    Jin-Guang Yu
    Xiao-Tian Feng
    Ji-Ping Hao
    Xi Gao
    International Journal of Steel Structures, 2020, 20 : 136 - 155
  • [34] Experimental Investigation and Numerical Simulation of Corrugated Steel Plate Shear Wall Considering the Gravity Load
    Li, Fangfang
    Gao, Junjie
    Zhang, Yu
    Chen, Yu
    Lv, Yang
    BUILDINGS, 2023, 13 (02)
  • [35] Experimental investigation on the behavior of corrugated steel shear wall subjected to the different angle of trapezoidal plate
    Hosseinzadeh, Leila
    Emami, Fereshteh
    Mofid, Masood
    STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, 2017, 26 (17):
  • [36] Seismic behavior of resilient composite steel plate shear wall using experimental investigations
    Katrangi, Mahmoud
    Khanmohammadi, Mohammad
    Zare, Hamid
    ENGINEERING STRUCTURES, 2024, 305
  • [37] Experimental investigation on four types of steel plate shear walls
    Li, Feng
    Li, Shen
    Wu, Guannan
    Wang, Dong
    PROGRESS IN STRUCTURE, PTS 1-4, 2012, 166-169 : 657 - 663
  • [38] Experimental investigation of double corrugated steel plate shear walls
    Ghodratian-Kashan, S. M.
    Maleki, S.
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2022, 190
  • [39] Investigation of the link beam length of a coupled steel plate shear wall
    Gholhaki, M.
    Ghadaksaz, M. B.
    STEEL AND COMPOSITE STRUCTURES, 2016, 20 (01): : 107 - 125
  • [40] Shear behavior of stainless-steel plate connectors for insulated precast concrete sandwich panels
    Lou, Xiaohang
    Xue, Weichen
    Bai, Haoyang
    Li, Ya
    Huang, Qian
    STRUCTURES, 2022, 44 : 1046 - 1056