Influence of Structure and Wettability of Porous Silver Surfaces on Enhancing Phase Change Heat Transfer

被引：0
|
作者：
Gouws, G. J. [1 ]
Sherson, B. [1 ]
Sinnathambi, A. [1 ]
Babu, R. [1 ]
Moore, C. P. [1 ]
机构：
[1] Victoria Univ Wellington, Sch Engn & Comp Sci, POB 600, Wellington, New Zealand
来源：
PROCEEDINGS OF THE 17TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM 2018) | 2018年
关键词：
freeze casting; pool boiling; evaporation; droplet; wettability; contact angle;
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The influence of the surface wettability and microstructure of porous silver surface layers on heat transfer during pool boiling and the evaporation of sessile drops from these surfaces was studied. These porous films were prepared by a modified freeze casting process and the wettability was found to be strongly influenced by the mass loading of silver nanoparticles in the starting colloidal suspension. As- prepared films typically show superhydrophylic behavior, most likely due to polyvinyl alcohol (PVA) binder remaining in the structure. The removal of this PVA by a hot wash in DI water revealed the intrinsic wettability of the surfaces. Heat transfer during the nucleate stage of pool boiling was found to be most efficient on hydrophilic surfaces with high Ag loading. The evaporation of sessile droplets from hot surfaces was also favored by more hydrophilic surfaces. The long term stability of these surfaces still remain an issue.
引用
收藏
页码：134 / 140
页数：7
相关论文
共 50 条
  • [31] SIMULTANEOUS HEAT AND MASS TRANSFER ACCOMPANIED BY PHASE CHANGE IN POROUS INSULATION.
    Vafai, K.
    Whitaker, S.
    Journal of Heat Transfer, 1986, 108 (01): : 132 - 140
  • [32] SIMULTANEOUS HEAT AND MASS-TRANSFER WITH PHASE-CHANGE IN A POROUS SLAB
    MOTAKEF, S
    ELMASRI, MA
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1986, 29 (10) : 1503 - 1512
  • [33] Modeling for heat and mass transfer with phase change in porous wick of CPL evaporator
    Huang, XM
    Liu, W
    Nakayama, A
    Peng, SW
    Nakayama, A
    HEAT AND MASS TRANSFER, 2005, 41 (07) : 667 - 673
  • [34] Modeling for heat and mass transfer with phase change in porous wick of CPL evaporator
    X. M. Huang
    W. Liu
    A. Nakayama
    S. W. Peng
    Heat and Mass Transfer, 2005, 41 : 667 - 673
  • [35] The change in wettability and structure of silica powder surfaces modified with hexamethyldisilazane
    Fuji, M
    Iwata, H
    Takei, T
    Watanabe, T
    Chikazawa, M
    ADVANCED POWDER TECHNOLOGY, 1999, 10 (02) : 187 - 198
  • [36] Visualization study on the condensation heat transfer on vertical surfaces with a wettability gradient
    Deng, Zilong
    Gao, Shangwen
    Wang, He
    Liu, Xiangdong
    Zhang, Chengbin
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 184
  • [37] Experiments and modeling of boiling heat transfer on hybrid-wettability surfaces
    Liang, Gangtao
    Chen, Yang
    Wang, Jiajun
    Wang, Zhao
    Shen, Shengqiang
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2021, 144
  • [38] Effects of thermal conductivity and wettability of porous materials on the boiling heat transfer
    An, Yi
    Huang, Congliang
    Wang, Xiaodong
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2021, 170
  • [39] POOL BOILING HEAT TRANSFER OF WATER ON HYDROPHILIC SURFACES WITH DIFFERENT WETTABILITY
    Girard, Adam R.
    Kim, Jinsub
    You, Seung M.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 8, 2017,
  • [40] Klanoparticle Coated Surfaces for Potential Heat Transfer Applications - the Morphology and Wettability
    Gao, N.
    Yan, Y. Y.
    PROCEEDINGS OF ISHTEC2012, 4TH INTERNATIONAL SYMPOSIUM ON HEAT TRANSFER AND ENERGY CONSERVATION, 2011, : 207 - 211
12345