Influence of Structure and Wettability of Porous Silver Surfaces on Enhancing Phase Change Heat Transfer

被引：0

作者：

Gouws, G. J. ^{[1
]}

Sherson, B. ^{[1
]}

Sinnathambi, A. ^{[1
]}

Babu, R. ^{[1
]}

Moore, C. P. ^{[1
]}

机构：

[1] Victoria Univ Wellington, Sch Engn & Comp Sci, POB 600, Wellington, New Zealand

来源：

PROCEEDINGS OF THE 17TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM 2018) | 2018年

关键词：

freeze casting; pool boiling; evaporation; droplet; wettability; contact angle;

D O I：

暂无

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The influence of the surface wettability and microstructure of porous silver surface layers on heat transfer during pool boiling and the evaporation of sessile drops from these surfaces was studied. These porous films were prepared by a modified freeze casting process and the wettability was found to be strongly influenced by the mass loading of silver nanoparticles in the starting colloidal suspension. As- prepared films typically show superhydrophylic behavior, most likely due to polyvinyl alcohol (PVA) binder remaining in the structure. The removal of this PVA by a hot wash in DI water revealed the intrinsic wettability of the surfaces. Heat transfer during the nucleate stage of pool boiling was found to be most efficient on hydrophilic surfaces with high Ag loading. The evaporation of sessile droplets from hot surfaces was also favored by more hydrophilic surfaces. The long term stability of these surfaces still remain an issue.

引用

页码：134 / 140

页数：7

共 50 条

[21] Simulation of phase change heat transfer in porous foam building walls
Yang Xiu
Chen Zhen-qian
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2007, 14 : 278 - 281
[22] FLOODED TWO-PHASE FLOW DYNAMICS AND HEAT TRANSFER WITH ENGINEERED WETTABILITY ON MICROSTRUCTURED SURFACES
Zhou, Zhou
Chen, Chung-Lung
PROCEEDINGS OF THE ASME 4TH INTERNATIONAL CONFERENCE ON MICRO/NANOSCALE HEAT AND MASS TRANSFER - 2013, 2014,
[23] Flooded Two-Phase Flow Dynamics and Heat Transfer With Engineered Wettability on Microstructured Surfaces
Chen, Bo
Zhou, Zhou
Shi, Junxiang
Schafer, Steven R.
Chen, Chung-Lung
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2015, 137 (09):
[24] Heat transfer in porous medium composite phase change materials with battery heat generation
Liu Z.
Lin J.
Li H.
Huang T.
Xu W.
Zhuang Y.
Qinghua Daxue Xuebao/Journal of Tsinghua University, 2022, 62 (06): : 1037 - 1043
[25] Formation of high efficient heat-transfer surfaces with brazed porous structure
Hisamori, Youichi
Machida, Kazumichi
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 1998, 16 (04): : 479 - 486
[26] INFLUENCE OF SURFACE WETTABILITY ON POOL BOILING HEAT TRANSFER
Phan, Hai Trieu
Caney, Nadia
Marty, Philippe
Colasson, Stephane
Gavillet, Jerome
Marechal, Alain
ICNMM 2009, PTS A-B, 2009, : 17 - 23
[27] Influence of Surface Wettability on Dropwise Condensation Heat Transfer
Chen, Yunfu
MACHINERY, MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1 AND 2, 2011, 228-229 : 869 - 873
[28] Heat and mass transfer with phase change in a porous structure partially heated: continuum model and pore network simulations
Figus, C
Le Bray, Y
Bories, S
Prat, M
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1999, 42 (14) : 2557 - 2569
[29] Heat Transfer Performance of Phase Change Heat Storage with Helical Coil Structure
Li, Ying
Qiao, Haitao
Dong, Hua
Hu, Jun
2009 ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), VOLS 1-7, 2009, : 2367 - +
[30] Direct synthesis of porous aluminum nitride foams for enhancing heat transfer and anti-leakage performance of phase change materials
Chen, Rui
Li, Deheng
Sheng, Nan
Zhu, Chunyu
THERMOCHIMICA ACTA, 2024, 734

← 1 2 3 4 5 →