An investigation of tool wear and surface quality in hard turning

被引：0
|
作者：
Dawson, TG [1 ]
Kurfess, TR [1 ]
机构：
[1] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA
来源：
TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTE OF SME, VOL XXVIII, 2000 | 2000年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper discusses experimental results of turning experiments on 52100 steel hardened to 58-62 HRC. A set of five different cutting conditions was selected to machine with five polycrystalline cubic boron nitride (PCBN) cutting tools for the life of each tool. The objective was to determine the effect of the cutting parameters on tool wear, changes in tool geometry, and resultant workpiece surface quality.
引用
收藏
页码：215 / 220
页数：4
相关论文
共 50 条
  • [41] Modelling of CBN tool crater wear in finish hard turning
    Huang, Y
    Liang, SY
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2004, 24 (9-10): : 632 - 639
  • [42] Modelling of CBN tool crater wear in finish hard turning
    Yong Huang
    Steven Y. Liang
    The International Journal of Advanced Manufacturing Technology, 2004, 24 : 632 - 639
  • [43] An investigation of heat partition and tool wear in hard turning of H13 tool steel with CBN cutting tools
    Mohammad Usman Ghani
    Nuri A. Abukhshim
    M. A. Sheikh
    The International Journal of Advanced Manufacturing Technology, 2008, 39 : 874 - 888
  • [44] An investigation of heat partition and tool wear in hard turning of H13 tool steel with CBN cutting tools
    Ghani, Mohammad Usman
    Abukhshim, Nuri A.
    Sheikh, M. A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 39 (9-10): : 874 - 888
  • [45] Systematic investigation of tool wear monitoring in turning operations
    Xu, Nuo
    Huang, Samuel
    Snyder, John
    Manufacturing Engineering and Materials Handling, 2005 Pts A and B, 2005, 16 : 359 - 367
  • [46] Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
    Zhao, T.
    Agmell, M.
    Persson, J.
    Bushlya, V.
    Stahl, J. E.
    Zhou, J. M.
    JOURNAL OF SUPERHARD MATERIALS, 2017, 39 (04) : 251 - 258
  • [47] Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
    T. Zhao
    M. Agmell
    J. Persson
    V. Bushlya
    J. E. Ståhl
    J. M. Zhou
    Journal of Superhard Materials, 2017, 39 : 251 - 258
  • [48] Effect of cutting edge radius on surface roughness and tool wear in hard turning of AISI 52100 steel
    T. Zhao
    J. M. Zhou
    V. Bushlya
    J. E. Ståhl
    The International Journal of Advanced Manufacturing Technology, 2017, 91 : 3611 - 3618
  • [49] Reduction of wear induced surface zone effects during hard turning by means of new tool geometries
    Denkena B.
    Boehnke D.
    Meyer R.
    Production Engineering, 2008, 2 (2) : 123 - 132
  • [50] The effects of CryoMQL conditions on tool wear and surface integrity in hard turning of AISI 52100 bearing steel
    Cetindag, Huseyin Alp
    Cicek, Adem
    Ucak, Necati
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 56 : 463 - 473
12345