An investigation of tool wear and surface quality in hard turning

被引：0
|
作者：
Dawson, TG [1 ]
Kurfess, TR [1 ]
机构：
[1] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA
来源：
TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTE OF SME, VOL XXVIII, 2000 | 2000年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper discusses experimental results of turning experiments on 52100 steel hardened to 58-62 HRC. A set of five different cutting conditions was selected to machine with five polycrystalline cubic boron nitride (PCBN) cutting tools for the life of each tool. The objective was to determine the effect of the cutting parameters on tool wear, changes in tool geometry, and resultant workpiece surface quality.
引用
收藏
页码：215 / 220
页数：4
相关论文
共 50 条
  • [31] Development of a tool wear-monitoring system for hard turning
    Scheffer, C
    Kratz, H
    Heyns, PS
    Klocke, F
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (10): : 973 - 985
  • [32] Application of CBN cutting tools in hard turning and tool wear
    Zhao, Haidong
    An, Libao
    Yang, Peiqing
    Geng, Ye
    MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 2022 - 2025
  • [33] The monitoring of flank wear on the CBN tool in the hard turning process
    J. M. Zhou
    M. Andersson
    J. E. Stahl
    The International Journal of Advanced Manufacturing Technology, 2003, 22 : 697 - 702
  • [34] CBN tool wear in hard turning: a survey on research progresses
    Yong Huang
    Y. Kevin Chou
    Steven Y. Liang
    The International Journal of Advanced Manufacturing Technology, 2007, 35 : 443 - 453
  • [35] The monitoring of flank wear on the CBN tool in the hard turning process
    Zhou, JM
    Andersson, M
    Stahl, JE
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 22 (9-10): : 697 - 702
  • [36] CBN tool wear in hard turning: A survey on research progresses
    Huang, Yong
    Chou, Y. Kevin
    Liang, Steven Y.
    International Journal of Advanced Manufacturing Technology, 2007, 35 (5-6): : 443 - 453
  • [37] Tool crater wear depth modeling in CBN hard turning
    Huang, Y
    Dawson, TG
    WEAR, 2005, 258 (09) : 1455 - 1461
  • [38] Effect of Si in Workpiece Material on Tool Wear in Hard Turning
    Iwasaki, Tatsuya
    Aiso, Toshiharu
    Watari, Koji
    ISIJ INTERNATIONAL, 2019, 59 (11) : 2062 - 2072
  • [39] Effect of Si in Workpiece Material on Tool Wear in Hard Turning
    Iwasaki, Tatsuya
    Also, Toshiharu
    Watari, Koji
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2018, 104 (04): : 208 - 217
  • [40] CBN tool wear in hard turning: a survey on research progresses
    Huang, Yong
    Chou, Y. Kevin
    Liang, Steven Y.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 35 (5-6): : 443 - 453
12345