Properties of Soldering Cu/Fe Alloy Produced by Powder Metallurgy

被引：2
|
作者：
Sueyoshi, Hidekazu [1 ]
Ishii, Ryosuke [1 ]
Fukudome, Hisayoshi [1 ]
Mizokuchi, Shinji [2 ]
Wakabayashi, Toshio [2 ]
Saikusa, Kazuya [2 ]
机构：
[1] Kagoshima Univ, Grad Sch Sci & Engn, Kagoshima 8900065, Japan
[2] JAPAN UNIX Co Ltd, Techno Ctr, Kumamoto 8612202, Japan
来源：
MATERIALS TRANSACTIONS | 2008年 / 49卷 / 12期
关键词：
lead-free solder; copper/iron alloy; powder metallurgy; wettability; thermal conductivity;
D O I：
10.2320/matertrans.MRA2008112
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to develop an advanced soldering material, the Cu/Fe alloys were produced by using powder metallurgy and the soldering properties were examined. Thermal conductivity of Cu/Fe alloy decreased with the increase in the volume fraction of pores, while it increased with the increase in the volume fraction of Cu particles. Wettability of Cu/Fe alloy was better than that of conventional Fe plating. Comparing the consumption amounts under the same wettability, the amount of Cu/Fe alloy consumed was smaller than that of Fe plating consumed. [doi: 10.2320/matertrans.MRA2008112]
引用
收藏
页码：2881 / 2886
页数：6
相关论文
共 50 条
  • [31] Effect of Mn on microstructure and properties of Cu-12Al powder metallurgy alloy
    Zhang, Guofei
    Yin, Haiqing
    Zhang, Cong
    Deng, Zhenghua
    Zhang, Ruijie
    Jiang, Xue
    Qu, Xuanhui
    [J]. MATERIALS RESEARCH EXPRESS, 2020, 7 (01)
  • [32] Effect of Fe addition in W-Ni-Cu heavy alloy processed through powder metallurgy on microstructure and mechanical properties
    Shakunt, Navindra Shekhar
    Upadhyaya, Anish
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 970
  • [33] Microstructure and properties of Cu-Fe alloys fabricated via powder metallurgy and rolling
    Zhang, Chenzeng
    Chen, Cunguang
    Huang, Lina
    Lu, Tianxing
    Li, Pei
    Wang, Wenwen
    Yang, Fang
    Volinsky, Alex A.
    Guo, Zhimeng
    [J]. POWDER METALLURGY, 2021, 64 (04) : 308 - 320
  • [34] INFLUENCE OF ALLOYING ELEMENTS ON THE MECHANICAL PROPERTIES OF A COBALT-BASED ALLOY PRODUCED WITH POWDER METALLURGY
    Nova, Katerina
    Novak, Pavel
    Dvorsky, Drahomir
    [J]. MATERIALI IN TEHNOLOGIJE, 2017, 51 (03): : 443 - 447
  • [35] Microstructure and properties of titanium alloy produced in the newly developed blended elemental powder metallurgy process
    Fujita, T
    Ogawa, A
    Ouchi, C
    Tajima, H
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 213 (1-2): : 148 - 153
  • [36] Microstructure and mechanical properties of a Mg-Zn-Y alloy produced by a powder metallurgy route
    Asgharzadeh, H.
    Yoon, E.Y.
    Chae, H.J.
    Kim, T.S.
    Lee, J.W.
    Kim, H.S.
    [J]. Journal of Alloys and Compounds, 2014, 586 (SUPPL. 1)
  • [37] Effect of ECAP on microstructure and mechanical properties of a commercial 6061 Al alloy produced by powder metallurgy
    Chang, SY
    Lee, KS
    Choi, SH
    Shin, DH
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 354 (1-2) : 216 - 220
  • [38] Microstructure and mechanical properties of a Mg-Zn-Y alloy produced by a powder metallurgy route
    Asgharzadeh, H.
    Yoon, E. Y.
    Chae, H. J.
    Kim, T. S.
    Lee, J. W.
    Kim, H. S.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 586 : S95 - S100
  • [39] Microstructure and mechanical properties of ultrafine grained Cu-0.8 wt%C alloy with a bimodal microstructure produced by powder metallurgy techniques
    Wang, Wenjing
    Zeng, Wei
    Li, Chenguang
    Liang, Jiamiao
    Zhang, Deliang
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 712 : 214 - 222
  • [40] Structure and mechanical properties of an AlCr6Fe2Ti1 alloy produced by rapid solidification powder metallurgy method
    Michalcova, Alena
    Vojtech, Dalibor
    Novak, Pavel
    Sittner, Petr
    Pilch, Jan
    Drahokoupil, Jan
    Kolarik, Kamil
    [J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2010, 101 (02) : 307 - 309
12345