Flux distribution and loss in a 100 kV A 3-phase wound amorphous transformer core

被引：7

作者：

Basak, A

Moses, AJ

Yasin, MR

机构：

[1] Cardiff School of Engineering, Univ. of Wales College of Cardiff, Cardiff CF2 1XH, Wales

来源：

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 1996年 / 160卷

关键词：

transformer core materials; electrical steel; amorphous material application;

D O I：

10.1016/0304-8853(96)00172-2

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A 3-phase, 5-limb transformer core was built using four wound and cut amorphous cores to demonstrate a substantial energy saving. Fundamental and third harmonic components of flux were measured in selected regions of the core. Total core loss of the transformer was measured fora range of core flux densities.

引用

页码：210 / 212

页数：3

共 50 条

[31] FLUX PATHS AND FLUX TRANSFER MECHANISM IN T-JOINTS OF 3-PHASE TRANSFORMER CORES
THOMAS, B
IEEE TRANSACTIONS ON MAGNETICS, 1975, MA11 (01) : 65 - 71
[32] DISTRIBUTIONS OF ROTATING FLUX AND IRON LOSS IN T-JOINTS OF 3-PHASE, 3-LIMBED MODEL TRANSFORMER CORES
NARITA, K
YAMAGUCHI, T
CHIDA, I
ELECTRICAL ENGINEERING IN JAPAN, 1975, 95 (05) : 431 - 438
[33] FLUX AND LOSS DISTRIBUTION IN A SPLIT-CORE 5-LIMB TRANSFORMER
BONYAR, AAA
BASAK, A
IEEE TRANSACTIONS ON MAGNETICS, 1989, 25 (05) : 3961 - 3963
[34] Analysis and calculation of magnetic flux density distribution and core loss of nanocrystalline transformer
Cai, Zhenyu
Zha, Chuanyang
Zhan, Ruopu
Huang, Gang
ENERGY REPORTS, 2022, 8 : 218 - 225
[35] Ferroresonance Characteristics in Unsymmetrical Flux Distribution of 150 KV Three Phase Transformer
Negara, I. Made Yulistya
Hernanda, I. Gusti Ngurah Satriyadi
Asfani, Dimas Anton
Fahmi, Daniar
Afif, Yusrizal
Wahyudi, Mochammad
TENCON 2017 - 2017 IEEE REGION 10 CONFERENCE, 2017, : 78 - 81
[36] Flux distribution in single phase, Si-Fe, wound transformer cores
Loizos, George
Kefalas, Themistoklis
Kladas, Antonios
Souflaris, Thanassis
Paparigas, Dimitris
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2008, 320 (20) : E874 - E877
[37] LOW CORE LOSS ROTATING FLUX TRANSFORMER
KRAUSE, RF
DELVECCHIO, RM
JOURNAL OF APPLIED PHYSICS, 1988, 64 (10) : 5376 - 5378
[38] The Combined Model for Design Single-Phase Transformer with Amorphous Steel Wound Core
Stulov, Alexey
Tikbonov, Andrey
Dryazgov, Dmitriy
2020 INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING, APPLICATIONS AND MANUFACTURING (ICIEAM), 2020,
[39] Comparison on losses and flux distribution between two 3-phase distribution transformers 1000KVA assembled with air gap and without air gap of transformer core lamination
Daut, I.
Ahmad, Dina M. M.
Zakaria, S.
Taib, S.
2007 ASIA-PACIFIC CONFERENCE ON APPLIED ELECTROMAGNETICS, PROCEEDINGS, 2007, : 346 - 349
[40] EXCITING INRUSH CURRENT OF A 3-PHASE, CORE-TYPE TRANSFORMER WITH 3 LEGS
OKUYAMA, K
INAGAKI, K
ELECTRICAL ENGINEERING IN JAPAN, 1971, 91 (01) : 165 - &

← 1 2 3 4 5 →