Mechanical properties and phase transformations of an aluminium alloyed TRIP-steel

被引：0
|
作者：
Traint, S [1 ]
Pichler, A [1 ]
Stiaszny, P [1 ]
Spiradek-Hahn, K [1 ]
Werner, EA [1 ]
机构：
[1] Tech Univ Munich, Christian Doppler Lab Moderne Mehrphasenstahle, Lehrstuhl Mech Materialprufamt, D-85747 Garching, Germany
来源：
43RD MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS | 2001年 / 39卷
关键词：
low-alloyed TRIP-steel; retained austenite; mechanical behavior; transformation behavior;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The influence of the intercritical annealing temperature, the cooling rate after the intercritical annealing and the overaging parameters on the mechanical properties, the microstructure and the transformation behavior of an aluminium alloyed TRIP-steel is investigated in detail. The austenite formation kinetics during intercritical annealing is studied by means of quantitative analyses of the microstructure and thermodynamical calculations. Microstructure investigations (light microscopy and TEN), dilatometric measurements and the mechanical properties are used to clarify the transformation behavior of the austenite during cooling and isothermal holding.
引用
收藏
页码：449 / 467
页数：19
相关论文
共 50 条
  • [31] Unraveling the Effect of Homogenization Treatment on Decomposition of Austenite and Mechanical Properties of Low-Alloyed TRIP Steel
    Azizi, Ghavam
    Mirzadeh, Hamed
    Parsa, Mohammad Habibi
    STEEL RESEARCH INTERNATIONAL, 2016, 87 (07) : 820 - 823
  • [32] Mechanical Behavior of Deformation-Induced α′-Martensite and Flow Curve Modeling of a Cast CrMnNi TRIP-Steel
    Wolf, Steffen
    Martin, Stefan
    Krueger, Lutz
    Martin, Ulrich
    Lorenz, Ulrike
    STEEL RESEARCH INTERNATIONAL, 2012, 83 (06) : 529 - 537
  • [33] Interfacial Reactions in TRIP-Steel/ZrO2 Composites
    Franke, P.
    Ksyta, M.
    Seiferty, H. J.
    STEEL RESEARCH INTERNATIONAL, 2011, 82 (09) : 1149 - 1157
  • [34] Identification of a low energy phase boundary in a low alloyed TRIP steel
    Prantl, W
    Papst, I
    Werner, EA
    ELECTRON MICROSCOPY 1998, VOL 2: MATERIALS SCIENCE 1, 1998, : 647 - 648
  • [35] Optimization of mechanical properties of a micro alloyed steel
    Rasouli, D.
    Asl, Sh. Khameneh
    Akbarzadeh, A.
    Daneshi, G. H.
    MATERIALS & DESIGN, 2009, 30 (06) : 2167 - 2172
  • [36] Investigation of Stress Induced Phase Transformation in TRIP-Steel/Mg-PSZ Composites Using EBSD
    Berek, Harry
    Aneziris, Christos Georgios
    Hasterok, Manuel
    Biermann, Horst
    Wolf, Steffen
    Krueger, Lutz
    ADVANCED ENGINEERING MATERIALS, 2011, 13 (11) : 1037 - 1041
  • [37] Microstructure evolution and mechanical properties influenced by austenitizing temperature in aluminum-alloyed TRIP-aided steel
    Ju-hua Liang
    Zheng-zhi Zhao
    Cai-hua Zhang
    Di Tang
    Shu-feng Yang
    Wei-ning Liu
    JournalofIronandSteelResearch(International), 2017, 24 (11) : 1115 - 1124
  • [38] Microstructure evolution and mechanical properties influenced by austenitizing temperature in aluminum-alloyed TRIP-aided steel
    Ju-hua Liang
    Zheng-zhi Zhao
    Cai-hua Zhang
    Di Tang
    Shu-feng Yang
    Wei-ning Liu
    Journal of Iron and Steel Research International, 2017, 24 : 1115 - 1124
  • [39] Mechanical Properties of TRIP Steel Microalloyed with Ti
    Krizan, Daniel
    De Cooman, Bruno C.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (08): : 3481 - 3492
  • [40] STUDY OF MECHANICAL-PROPERTIES OF A TRIP STEEL
    CHAKRABARTI, I
    SEAL, AK
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1980, 33 (05): : 418 - 422
12345