Mechanical properties and phase transformations of an aluminium alloyed TRIP-steel

被引：0
|
作者：
Traint, S [1 ]
Pichler, A [1 ]
Stiaszny, P [1 ]
Spiradek-Hahn, K [1 ]
Werner, EA [1 ]
机构：
[1] Tech Univ Munich, Christian Doppler Lab Moderne Mehrphasenstahle, Lehrstuhl Mech Materialprufamt, D-85747 Garching, Germany
来源：
43RD MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS | 2001年 / 39卷
关键词：
low-alloyed TRIP-steel; retained austenite; mechanical behavior; transformation behavior;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The influence of the intercritical annealing temperature, the cooling rate after the intercritical annealing and the overaging parameters on the mechanical properties, the microstructure and the transformation behavior of an aluminium alloyed TRIP-steel is investigated in detail. The austenite formation kinetics during intercritical annealing is studied by means of quantitative analyses of the microstructure and thermodynamical calculations. Microstructure investigations (light microscopy and TEN), dilatometric measurements and the mechanical properties are used to clarify the transformation behavior of the austenite during cooling and isothermal holding.
引用
收藏
页码：449 / 467
页数：19
相关论文
共 50 条
  • [11] Martensitic Phase Transformation in TRIP-Steel/Mg-PSZ Honeycomb Composite Materials on Mechanical Load
    Weigelt, Christian
    Aneziris, Christos G.
    Berek, Harry
    Ehinger, David
    Martin, Ulrich
    ADVANCED ENGINEERING MATERIALS, 2012, 14 (1-2) : 53 - 60
  • [12] Simulation of martensitic transformations in TRIP-steel and Fe-based shape memory alloy
    Nishimura, F
    Liedl, U
    Werner, EA
    COMPUTATIONAL MATERIALS SCIENCE, 2003, 26 : 189 - 196
  • [13] Deformation Mechanisms and Martensitic Phase Transformation in TRIP-Steel/Zirconia Honeycombs
    Ehinger, David
    Krueger, Lutz
    Martin, Ulrich
    Weigelt, Christian
    Aneziris, Christos G.
    STEEL RESEARCH INTERNATIONAL, 2012, 83 (06) : 565 - 575
  • [14] Challenges in Pressureless Sintering of Interstitially Alloyed TRIP Steel and Resulting Mechanical Properties
    Baumgart, Christine
    Weigelt, Christian
    Wendler, Marco
    Saenko, Ivan
    Aneziris, Christos G.
    Volkova, Olena
    Krueger, Lutz
    ADVANCED ENGINEERING MATERIALS, 2019, 21 (05)
  • [15] Thermal stability of retained austenite in low alloyed TRIP-steel determined by high energy synchrotron radiation
    Brauser, Stephan
    Kromm, Arne
    Dabah, Eitan
    Kannengiesser, Thomas
    Rethmeier, Michael
    MECHANICAL STRESS EVALUATION BY NEUTRONS AND SYNCHROTRON RADIATION VI, 2014, 772 : 129 - 133
  • [16] A thermomechanically coupled material model for TRIP-steel
    Prueger, S.
    Seupel, A.
    Kuna, M.
    INTERNATIONAL JOURNAL OF PLASTICITY, 2014, 55 : 182 - 197
  • [17] Development of the heat treatment mode for TRIP steel additionally alloyed with aluminium
    Gorlenko, D. A.
    Kupriyanova, O. A.
    Pivovarova, K. G.
    Polyakova, M. A.
    CIS IRON AND STEEL REVIEW, 2023, 26 : 70 - 75
  • [18] Stress Induced Phase Transformation in TRIP-Steel/Mg-PSZ Composites
    Berek, Harry
    Aneziris, Christos G.
    Hasterok, Manuel
    Biermann, Horst
    Wolf, Steffen
    Krueger, Lutz
    SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2, 2011, 172-174 : 709 - +
  • [19] IMPLEMENTATION OF A MATERIAL MODEL FOR A CAST TRIP-STEEL
    Prueger, Stefan
    Kuna, Meinhard
    Nagel, Kai
    Biermann, Horst
    COMPUTATIONAL PLASTICITY XI: FUNDAMENTALS AND APPLICATIONS, 2011, : 869 - 880
  • [20] Ceramic Processing for TRIP-Steel/Mg-PSZ Composite Materials for Mechanical Applications
    Weigelt, C.
    Aneziris, C. G.
    Yanina, A.
    Guk, S.
    STEEL RESEARCH INTERNATIONAL, 2011, 82 (09) : 1080 - 1086
12345