Tribocorrosion behavior of Spark Plasma Sintering TiC reinforced Ti-based composites

被引：5
|
作者：
Farias, I [1 ]
Jimenez, O. [1 ]
Flores, M. [1 ]
Rivera-Tello, Cesar D. [3 ]
Gonzalez, M. A. [1 ]
Olmos, L. [2 ]
机构：
[1] Univ Guadalajara, Dept Ingn Proyectos, Zapopan 45150, Jalisco, Mexico
[2] Univ Michoacana, Inst Invest Ciencias Tierra INICIT, Morelia 58060, Michoacan, Mexico
[3] Univ Guadalajara, Dept Ingn Mecan Elect, CUCEI, Blvd Marcelino Garcia Barragan 1421, Guadalajara 44430, Jalisco, Mexico
来源：
MATERIALS LETTERS | 2020年 / 277卷
关键词：
Spark Plasma Sintering; Tribocorrosion; Ti-based composites; MECHANISMS;
D O I：
10.1016/j.matlet.2020.128298
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A mixture of Ti and TiH2 powders with 0, 3, 10 and 30% Vol. TiC was used to process Ti-based composite materials by Spark Plasma Sintering (SPS) at 850 degrees C. Tribocorrosion tests in Simulated Body Fluid (SBF) were performed by coupling a potentiostat to a microtribometer in a ball-on-plate reciprocating configuration at 2 N load. The results showed that the addition of 3% Vol. TiC resulted in an improvement in wear resistance and corrosion tendency by approximately 3 times in comparison to unreinforced composites. Wear mechanisms showed a transition from severe adhesion, to a less severe damage within abrasion regime with TiC content. (C) 2020 Elsevier B.V. All rights reserved.
引用
收藏
页数：4
相关论文
共 50 条
  • [1] Ti-based Bulk Metallic Glass Composites Produced by Spark Plasma Sintering
    Xie, Guoqiang
    Zhu, Shengli
    Qin, Fengxiang
    ADVANCED MATERIALS SCIENCE AND TECHNOLOGY, (IFAMST-8), 2013, 750 : 52 - 55
  • [2] Mechanical behaviors of diamond reinforced Ti-based bulk metallic glassy composites prepared by spark plasma sintering
    Wang, D. J.
    Huang, Y. J.
    Wu, L. Z.
    Shen, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 560 : 841 - 846
  • [3] Fabrication of Ti-based Biodegradable Material Composites Prepared by Spark Plasma Sintering Method
    Miura-Fujiwara, Eri
    Teramoto, Takeshi
    Sato, Hisashi
    Kobayashi, Equo
    Watanabe, Yoshimi
    PRICM 7, PTS 1-3, 2010, 654-656 : 2158 - +
  • [4] Spark plasma sintering of TiC particle-reinforced molybdenum composites
    Ohser-Wiedemann, R.
    Weck, Ch.
    Martin, U.
    Mueller, A.
    Seifert, H. J.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 32 : 1 - 6
  • [5] In-situ synthesis TiC + TiB/Ti composites by spark plasma sintering
    Northwest Institute for Nonferrous Metal Research, Xi'an 710016, China
    不详
    Xiyou Jinshu Cailiao Yu Gongcheng, 2007, 3 (484-488):
  • [6] Sintering behavior of TiC reinforced SiC composites doped with Ti and C
    Tong, XH
    Yano, T
    Iseki, T
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1996, 104 (07) : 594 - 598
  • [7] Sintering behavior of TiC reinforced SiC composites doped with Ti and C
    Tong, Xiaohua
    Yano, Toyohiko
    Iseki, Takayoshi
    Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, 1996, 104 (1211): : 594 - 598
  • [8] Biocompatibility Study of Ti-based Alloys Fabricated by Spark Plasma Sintering
    Mahundla, M. R.
    Matizamhuka, W. R.
    Machaka, R.
    Yamamoto, A.
    Shongwe, M. B.
    CONFERENCE OF THE SOUTH AFRICAN ADVANCED MATERIALS INITIATIVE (COSAAMI 2019), 2019, 655
  • [9] Production and characterization of TZM based TiC or ZrC reinforced composites prepared by spark plasma sintering (SPS)
    Tuzemen, Cansinem
    Yavas, Baris
    Akin, Ipek
    Yucel, Onuralp
    Sahin, Filiz
    Goller, Gultekin
    Journal of Alloys and Compounds, 2020, 781 : 433 - 439
  • [10] Production and characterization of TZM based TiC or ZrC reinforced composites prepared by spark plasma sintering (SPS)
    Tuzemen, Cansinem
    Yavas, Baris
    Akin, Ipek
    Yucel, Onuralp
    Sahin, Filiz
    Goller, Gultekin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 781 : 433 - 439
12345