Effect of Si Content on the Size of Fe-rich Intermetallic Particles in Al-xSi-0.8Fe Alloys

被引:2
|
作者
Sivarupan, T. [1 ]
Caceres, C. H. [1 ,2 ]
Taylor, J. A. [1 ]
机构
[1] Univ Queensland, CAST Cooperat Res Ctr, Sch Mech & Min Engn, Brisbane, Qld 4072, Australia
[2] Univ Queensland, Ctr Excellence Design Light Metals, ARC, Brisbane, Qld, Australia
来源
关键词
Secondary dendrite arm; Sandcasting; Intermetallics; Aluminium silicon alloy; FOUNDRY ALLOYS; BETA-AL5FESI; NUCLEATION;
D O I
10.4028/www.scientific.net/MSF.765.107
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Al-Si-Fe plates with Si contents of 4.5, 9 and 11 mass %, unmodified and Sr-modified, were quasi-directionally solidified in sand moulds with chills at one end. The size and nature of the Fe-rich intermetallics were determined along the plates. Two forms of the intermetallic were observed, alpha-Al8FeSi and beta-Al5FeSi, in proportions and scale dependent on the cooling rate and the Si concentration. The size of the beta-phase increased with the concentration of Si at low cooling rates. At high cooling rates the tendency to form alpha-Al8FeSi phase increased with increasing Si content reducing the size of the beta-plates. Modification generally increased the size of the pre-eutectically formed plates while reducing the post eutectically formed ones.
引用
收藏
页码:107 / +
页数:2
相关论文
共 50 条
  • [31] Influence of Fe-rich intermetallics on solidification defects in Al-Si-Cu alloys
    Puncreobutr, C.
    Lee, P. D.
    Kareh, K. M.
    Connolley, T.
    Fife, J. L.
    Phillion, A. B.
    ACTA MATERIALIA, 2014, 68 : 42 - 51
  • [32] Thermal Stability of Intermetallic Phases in Fe-rich Fe-Cr-Ni-Mo Alloys
    Yang, Ying
    Tan, Lizhen
    Busby, Jeremy T.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (09): : 3900 - 3908
  • [33] Oxidation and abrasive wear of Fe–Si and Fe–Al intermetallic alloys
    A. M. S. Malafaia
    M. T. Milan
    M. Omar
    R. M. Muñoz Riofano
    M. F. de Oliveira
    Journal of Materials Science, 2010, 45 : 5393 - 5397
  • [34] Formation of Fe-rich intermetallic compounds and their effect on the tensile properties of squeeze-cast Al-Cu alloys
    Zhang, Wei-wen
    Lin, Bo
    Luo, Zhi
    Zhao, Yu-liang
    Li, Yuan-yuan
    JOURNAL OF MATERIALS RESEARCH, 2015, 30 (16) : 2474 - 2484
  • [35] Influence of Fe-rich particles on microstructure evolution, texture and mechanical properties of Al-Mg-Si-Cu alloys
    Yu, Libo
    Chen, Lin
    Wang, Hebin
    Wang, Xiaofeng
    Peng, Wenfei
    Wang, Yonggang
    Zhuang, Linzhong
    METALLURGICAL RESEARCH & TECHNOLOGY, 2020, 117 (05)
  • [36] Coupling In-situ Observations and Microscale Modeling to Predict Pore and Fe-rich Intermetallic Formation during the Solidification of Al-Si-Cu-Fe Alloys
    Lee, P. D.
    Wang, J.
    Li, M.
    MODELING OF CASTING, WELDING, AND ADVANCED SOLIDIFICATION PROCESSES - XII, 2009, : 87 - +
  • [37] Effect of ultrasonic vibration on Fe-containing intermetallic compounds of hypereutectic Al-Si alloys with high Fe content
    Lin, Chong
    Wu, Shu-sen
    Zhong, Gu
    Wan, Li
    An, Ping
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (05) : 1245 - 1252
  • [38] Ferromagnetic resonance study of Fe rich Fe-Al intermetallic alloys
    Rodriguez, D. Martin
    Schmool, D. S.
    Garitaonandia, J. S.
    Plazaola, F.
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2007, 316 (02) : E484 - E487
  • [39] Electronic structure calculations of Fe-rich ordered and disordered Fe-Al alloys
    E. Api naniz
    F. Plazaola
    J.S. Garitaonandia
    The European Physical Journal B - Condensed Matter and Complex Systems, 2003, 31 : 167 - 177
  • [40] Preparation and properties of Fe-rich bulk Fe-Nd-Al amorphous alloys
    School of Materials Science, Hunan University, Changsha 410082, China
    不详
    Zhongguo Youse Jinshu Xuebao, 2007, 3 (406-409):