Effect of Si Content on the Size of Fe-rich Intermetallic Particles in Al-xSi-0.8Fe Alloys

被引:2
|
作者
Sivarupan, T. [1 ]
Caceres, C. H. [1 ,2 ]
Taylor, J. A. [1 ]
机构
[1] Univ Queensland, CAST Cooperat Res Ctr, Sch Mech & Min Engn, Brisbane, Qld 4072, Australia
[2] Univ Queensland, Ctr Excellence Design Light Metals, ARC, Brisbane, Qld, Australia
来源
关键词
Secondary dendrite arm; Sandcasting; Intermetallics; Aluminium silicon alloy; FOUNDRY ALLOYS; BETA-AL5FESI; NUCLEATION;
D O I
10.4028/www.scientific.net/MSF.765.107
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Al-Si-Fe plates with Si contents of 4.5, 9 and 11 mass %, unmodified and Sr-modified, were quasi-directionally solidified in sand moulds with chills at one end. The size and nature of the Fe-rich intermetallics were determined along the plates. Two forms of the intermetallic were observed, alpha-Al8FeSi and beta-Al5FeSi, in proportions and scale dependent on the cooling rate and the Si concentration. The size of the beta-phase increased with the concentration of Si at low cooling rates. At high cooling rates the tendency to form alpha-Al8FeSi phase increased with increasing Si content reducing the size of the beta-plates. Modification generally increased the size of the pre-eutectically formed plates while reducing the post eutectically formed ones.
引用
收藏
页码:107 / +
页数:2
相关论文
共 50 条
  • [21] Exploring the Effect of Ni as an Impurity on Fe-Rich Phases in Simulated Direct Chill Casting Al–Fe-Si Alloys
    E. A. Elsharkawi
    D. MacNeil
    B. Chouraqui
    X.-G. Chen
    Metallography, Microstructure, and Analysis, 2022, 11 : 724 - 735
  • [22] Precipitation of Fe-rich intermetallic phases in liquid Al-13.58Si-11.59Fe-1.19Mn alloy
    Orozco-Gonzalez, P.
    Castro-Roman, M.
    Martinez, Arturo I.
    Herrera-Trejo, M.
    Lopez, A. A.
    Quispe-Marcatoma, J.
    INTERMETALLICS, 2010, 18 (08) : 1617 - 1622
  • [23] Exploring the Effect of Ni as an Impurity on Fe-Rich Phases in Simulated Direct Chill Casting Al-Fe-Si Alloys
    Elsharkawi, E. A.
    MacNeil, D.
    Chouraqui, B.
    Chen, X-G
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2022, 11 (05) : 724 - 735
  • [24] Microstructural Optimization of Fe-Rich Intermetallic in Al-12 wt% Si-2 wt% Fe alloys by Adding Travelling Magnetic Fields
    Luo, Lei
    Xia, Hongying
    Luo, Liangshun
    Su, Yanqing
    Wang, Liang
    Guo, Jingjie
    Fu, Hengzhi
    ADVANCED ENGINEERING MATERIALS, 2020, 22 (11)
  • [25] Effect of Bifilm Oxides on the Dry Sliding Wear Behavior of Fe-Rich Al-Si Alloys
    Akaberi, N.
    Taghiabadi, R.
    Razaghian, A.
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2017, 139 (05):
  • [26] The kinetics of Fe-rich intermetallic formation in aluminium alloys: In situ observation
    Wang, Junsheng
    Lee, Peter D.
    Hamilton, Richard W.
    Li, Mei
    Allison, John
    SCRIPTA MATERIALIA, 2009, 60 (07) : 516 - 519
  • [27] Transformation of Fe-rich intermetallic phases and eutectic Si morphology in Al-Si-Cu-Fe cast alloy with solution treatment
    Jiang, Bo
    Ji, Ze-Sheng
    Xu, Hong-Yu
    Hu, Mao-Liang
    Zhang, Yong-Bing
    Wang, Shao-Zhu
    MATERIALS RESEARCH EXPRESS, 2019, 6 (06):
  • [28] Effects of Sr on Fe-rich intermetallics in recycled Al-Si-Cu alloys
    Li, Quan
    Wang, Junsheng
    Xue, Chengpeng
    Miao, Yisheng
    Hou, Qinghuai
    Yang, Xinghai
    Meng, Yanan
    Yang, Zhihao
    Tian, Guangyuan
    Su, Hui
    Li, Xingxing
    JOURNAL OF MATERIALS SCIENCE, 2024, 59 (25) : 11572 - 11595
  • [29] Uncovering the effects of neutralizing elements (Co, Mn and Cr) on the Fe-rich intermetallic formation in Al-Si-Cu alloys
    Wang, Bing
    Wang, Junsheng
    Liu, Xinxiu
    Li, Quan
    Liu, Xiaoguang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 858
  • [30] Thermal Stability of Intermetallic Phases in Fe-rich Fe-Cr-Ni-Mo Alloys
    Ying Yang
    Lizhen Tan
    Jeremy T. Busby
    Metallurgical and Materials Transactions A, 2015, 46 : 3900 - 3908