Formation of oxygen structures by air activation.: A study by FT-IR spectroscopy

被引:191
|
作者
Gómez-Serrano, V [1 ]
Piriz-Almeida, F [1 ]
Durán-Valle, CJ [1 ]
Pastor-Villegas, J [1 ]
机构
[1] Univ Extremadura, Dept Quim Inorgan, E-06071 Badajoz, Spain
关键词
activated carbon; infrared spectroscopy; chemical structure;
D O I
10.1016/S0008-6223(99)00025-1
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Using cherry stones (CS) as starting material and commonly air as activating agent, formation of oxygen structures in activated carbon is investigated. In the preparation of samples, CS was first heated at temperatures between 450 and 900 degrees C in N-2 atmosphere. Then, in a successive activation stage, the product carbonized at 600 degrees C was maintained in contact with an air stream at 25-325 degrees C for 24 h, 300-600 degrees C for 1 h, and 250 degrees C for 1-96 h. The rest of the carbonization products of CS were also heated at 250 degrees C in air for 24 h. Moreover. the product carbonized at 900 degrees C was activated at 750 or 900 degrees C in CO2 for 1 h. Furthermore, in a second activation stage, the products activated at such temperatures in CO2 and those at 300-600 degrees C in air were heated at 250 degrees C in air for 24 h. The starting material, carbonized products, and activated carbons were examined by FT-IR spectroscopy. A number of carbon-hydrogen atomic groupings and of oxygen groups and structures, i.e., OH, C=O, and C-O-C) have been identified in CS, The yield of the activation and carbonization processes and also the chemical structure of the resultant products are strongly dependent on the carbonization temperature. In the products carbonized at 600-900 degrees C, only ether type structures are detected. The activation at 250 degrees C in air results in activated carbons that contain different oxygen structures when CS is carbonized at 450 or 600 degrees C. At 750 or 900, by contrast, oxygen structures are not formed as a result of the activation treatment. This also applies when the carbonization product of CS at 900 degrees C is activated solely in CO2 or first in CO2 and then in air. The heating conditions in air greatly influence the formation of oxygen structures (specifically, of lactonic and ion-radical types) to a large extent. It only occurs when activating at relatively low temperatures for a long time; at 300-600 degrees C for 1 h, however, the oxygen structures are not formed. (C) 1999 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:1517 / 1528
页数:12
相关论文
共 50 条
  • [21] Analysis of gasolines by FT-IR spectroscopy
    Fodor, GE
    Kohl, KB
    Mason, RL
    ANALYTICAL CHEMISTRY, 1996, 68 (01) : 23 - 30
  • [22] FAST THERMOLYSIS FT-IR SPECTROSCOPY
    BRILL, TB
    ANALYTICAL CHEMISTRY, 1989, 61 (15) : A897 - &
  • [23] The use of FT-IR spectroscopy in microtechnologies
    Guber, AE
    MIKROCHIMICA ACTA, 1997, : 639 - 641
  • [24] FT-IR and FT Raman spectroscopy in medical microbiology
    Naumann, D
    SPECTROSCOPY OF BIOLOGICAL MOLECULES: MODERN TRENDS, 1997, : 433 - 434
  • [25] COMPUTERS AND COMPUTING IN FT-IR SPECTROSCOPY
    KUEHL, D
    DUCKWORTH, J
    7TH INTERNATIONAL CONFERENCE ON FOURIER TRANSFORM SPECTROSCOPY, 1989, 1145 : 48 - 56
  • [26] PRINCIPLES AND USE OF FT-IR SPECTROSCOPY
    LINDSTROM, M
    TROLLSAS, P
    SVENSK PAPPERSTIDNING-NORDISK CELLULOSA, 1990, 93 (06): : 66 - &
  • [27] The imaging advantage to FT-IR spectroscopy
    Leary, Pauline E.
    Giordano, Jennifer L.
    Reffner, John A.
    SPECTROSCOPY, 2008, : 12 - +
  • [28] Polarization modulation FT-IR spectroscopy
    Buffeteau, T
    Desbat, B
    ACTUALITE CHIMIQUE, 2003, (01): : 18 - 25
  • [29] Assessing molecular similarity/diversity of chemical structures by FT-IR spectroscopy
    Schoonjans, V
    Questier, F
    Guo, Q
    Van der Heyden, Y
    Massart, DL
    JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS, 2001, 24 (04) : 613 - 627
  • [30] In Situ Monitoring of Selective Catalysts on Urethane Formation by FT-IR Spectroscopy
    Wang, Shunping
    Yang, Xiaodeng
    Bai, Qingquan
    Li, Tianduo
    INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION, 2013, 18 (02) : 146 - 153