Underwater photogrammetry for 3D modeling of floating objects: The case study of a 19-foot motor boat

被引：0
|
作者：
Menna, F. [1 ,2 ]
Nocerino, E. [2 ]
Del Pizzo, S. [2 ]
Ackermann, S. [2 ]
Scamardella, A. [2 ]
机构：
[1] Bruno Kessler Fdn FBK, Opt Metrol Unit 3D, Trento, Italy
[2] Parthenope Univ Naples, LTF DSA, Naples, Italy
来源：
SUSTAINABLE MARITIME TRANSPORTATION AND EXPLOITATION OF SEA RESOURCES, VOL 1 | 2012年
关键词：
SYSTEM; CALIBRATION; STABILITY;
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
3D modeling of floating or semi-submerged objects is a challenging and attractive task for the marine industry especially if the manufacturing of components that have to be replaced or repaired after a damage is necessary or the ship itself has to be converted. Up to now the 3D reverse engineering of ships has required docking operations to carry out a geodetic or photogrammetric survey with high costs for shipowners. In this paper an innovative 3D acquisition method for digital recording of floating objects is presented. The method is based on digital photogrammetry both underwater and terrestrial. Preliminary tests are presented for the case study of a 19-foot motor boat. Two surveys of the boat in floating conditions are carried out and then joined by means of special rigid orientation devices built ad hoc.
引用
收藏
页码：537 / 544
页数：8
相关论文
共 50 条
  • [31] Development and calibration of a 3D numerical modeling of roof bolts - A case study
    Cheng, Jingyi
    Li, Wenfeng
    Zhijun, Wan
    Electronic Journal of Geotechnical Engineering, 2014, 19 (0Q): : 4257 - 4268
  • [32] 3D Numerical Modeling of Stratified Flows: Case Study of the Bosphorus Strait
    Ozturk, Mehmet
    Ayat, Berna
    Aydogan, Burak
    Yuksel, Yalcin
    JOURNAL OF WATERWAY PORT COASTAL AND OCEAN ENGINEERING, 2012, 138 (05) : 406 - 419
  • [33] INTEGRATING 3D MODELING AND PROCESS PLANNING BY FEATURES - A CASE-STUDY
    CRAWFORD, R
    INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 1993, 6 (1-2) : 113 - 118
  • [34] 3D VIRTUAL MODELLING OF EXISTING OBJECTS BY TERRESTRIAL PHOTOGRAMMETRIC METHODS - CASE STUDY OF BARUTANA
    Pejic, Petar
    Krasic, Sonja
    Krstic, Hristina
    Dragovic, Magdalena
    Akbiyik, Yagiz
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2017, 24 : 233 - 239
  • [35] 3D virtual modelling of existing objects by terrestrial photogrammetric methods - Case study of Barutana
    Kreiranje virtualnih 3D modela izgrađenih objekata metodama zemaljske fotogrametrije - Studija slučaja Barutana
    2017, Strojarski Facultet (24):
  • [36] Design and implementation of 3D strata objects registration based on LADM - A case study in Malaysia
    Zulkifli, Nur Amalina
    Rahman, Alias Abdul
    Bernad, Siew Chengxi
    LAND USE POLICY, 2021, 108
  • [37] Creating a 3D urban model by terrestrial laser scanners and photogrammetry techniques: A case study on the historical peninsula of Istanbul
    Ergun, Bahadir
    O3A: OPTICS FOR ARTS, ARCHITECTURE, AND ARCHAEOLOGY, 2007, 6618
  • [38] The Application of 3D Image-Based Photogrammetry in Thai Heritage Sites: A Case Study ofWat Chai Wattanaram
    Chaiyasarn, Krisada
    Mahat, Shekhar
    Prukpratin, Supawit
    PROTECTION OF HISTORICAL CONSTRUCTIONS, PROHITECH 2021, 2022, 209 : 477 - 488
  • [39] 3D Underwater Reconstruction of Archeology object with a mono camera camcorder: the case study at Gourneyras lake
    Onmek, Y.
    Triboulet, J.
    Druon, S.
    Meline, A.
    Louis, S.
    Jouvencel, B.
    OCEANS 2017 - ABERDEEN, 2017,
  • [40] PLANTAR FOOTPRINTS AND 3D FOOT SHAPE DIGITAL ANALYSIS FOR OVERWEIGHT TEENAGER – ONE CASE STUDY
    Costea, Mariana
    Seul, Arina
    Mihai, Aura
    Leather and Footwear Journal, 2022, 22 (01): : 25 - 32
12345