Underwater photogrammetry for 3D modeling of floating objects: The case study of a 19-foot motor boat

被引：0
|
作者：
Menna, F. [1 ,2 ]
Nocerino, E. [2 ]
Del Pizzo, S. [2 ]
Ackermann, S. [2 ]
Scamardella, A. [2 ]
机构：
[1] Bruno Kessler Fdn FBK, Opt Metrol Unit 3D, Trento, Italy
[2] Parthenope Univ Naples, LTF DSA, Naples, Italy
来源：
SUSTAINABLE MARITIME TRANSPORTATION AND EXPLOITATION OF SEA RESOURCES, VOL 1 | 2012年
关键词：
SYSTEM; CALIBRATION; STABILITY;
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
3D modeling of floating or semi-submerged objects is a challenging and attractive task for the marine industry especially if the manufacturing of components that have to be replaced or repaired after a damage is necessary or the ship itself has to be converted. Up to now the 3D reverse engineering of ships has required docking operations to carry out a geodetic or photogrammetric survey with high costs for shipowners. In this paper an innovative 3D acquisition method for digital recording of floating objects is presented. The method is based on digital photogrammetry both underwater and terrestrial. Preliminary tests are presented for the case study of a 19-foot motor boat. Two surveys of the boat in floating conditions are carried out and then joined by means of special rigid orientation devices built ad hoc.
引用
收藏
页码：537 / 544
页数：8
相关论文
共 50 条
  • [21] Efficiency Study of Combined UAS Photogrammetry and Terrestrial LiDAR in 3D Modeling for Maintenance and Management of Fill Dams
    Kang, Joonoh
    Kim, Daljoo
    Lee, Chulhee
    Kang, Jaemo
    Kim, Donggyou
    REMOTE SENSING, 2023, 15 (08)
  • [22] A Case Study of Augmented Physical Interface by Foot Access with 3D Printed Attachment
    Minagawa, Tatsuya
    Ochiai, Yoichi
    DESIGN, USER EXPERIENCE, AND USABILITY: DESIGN FOR DIVERSITY, WELL-BEING, AND SOCIAL DEVELOPMENT, DUXU 2021, PT II, 2021, 12780 : 315 - 332
  • [23] 3D Fine-scale Terrain Variables from Underwater Photogrammetry: A New Approach to Benthic Microhabitat Modeling in a Circalittoral Rocky Shelf
    Prado, Elena
    Rodriguez-Basalo, Augusto
    Cobo, Adolfo
    Rios, Pilar
    Sanchez, Francisco
    REMOTE SENSING, 2020, 12 (15)
  • [24] 3D Thermal and Spatial Modeling of a Subway Tunnel: A Case Study
    Al Lafi, Ghassan
    Zhu, Zhenhua
    Dawood, Thikra
    Zayed, Tarek
    COMPUTING IN CIVIL ENGINEERING 2017: INFORMATION MODELLING AND DATA ANALYTICS, 2017, : 386 - 394
  • [25] The Use of 3D Numerical Modeling in Conceptual Design: A Case Study
    Michalak, Hanna
    Przybysz, Pawel
    ENERGIES, 2021, 14 (16)
  • [26] Construction of knowledge constraints: a case study of 3D structural modeling
    Lu, Cai
    Xu, Xinran
    Zhang, Bingbin
    SCIENTIFIC REPORTS, 2024, 14 (01)
  • [27] 3D MODELLING OF CUSTOMIZED LASTS BASED ON ANTHROPOMETRIC DATA ACQUIRED FROM 3D FOOT SCANNING – ONE CASE STUDY
    Costea, Mariana
    Mihai, Aura
    Seul, Arina
    Leather and Footwear Journal, 2022, 22 (02): : 87 - 100
  • [28] HISTORICAL PHOTOGRAMMETRY AND TERRESTRIAL LASER SCANNING FOR THE 3D VIRTUAL RECONSTRUCTION OF DESTROYED STRUCTURES: A CASE STUDY IN ITALY
    Bitelli, G.
    Dellapasqua, M.
    Girelli, V. A.
    Sbaraglia, S.
    Tini, M. A.
    GEOMATICS & RESTORATION - CONSERVATION OF CULTURAL HERITAGE IN THE DIGITAL ERA, 2017, 42-5 (W1): : 113 - 119
  • [29] TLS and photogrammetry for 3D modelling of a low relief: case study of ancient archive, Palazzo Bo, Padua
    Masiero, Andrea
    Guarnieri, Alberto
    Fissore, Francesca
    Piragnolo, Marco
    Pirotti, Francesco
    Vettore, Antonio
    2018 IEEE INTERNATIONAL CONFERENCE ON METROLOGY FOR ARCHAEOLOGY AND CULTURAL HERITAGE (METROARCHAEO 2018), 2018, : 431 - 436
  • [30] Procedural modeling applied to the 3D city model of Bogota:A case study
    Gustavo ALOMíA
    Diego LOAIZA
    Claudia Zù?IGA
    Xun LUO
    Rafael ASOREY-CACHEDA
    虚拟现实与智能硬件(中英文), 2021, 3 (05) : 423 - 433
12345