The effect of cutting force and tool wear in milling INCONEL 718

被引：6
|
作者：
Kamdani, K. [1 ]
Ashaary, I [1 ]
Hassan, S. [1 ]
Lajis, M. A.
机构：
[1] Univ Tun Hussein Onn Malaysia, Precis Machining Res Ctr PREMACH, Fac Mech & Mfg Engn, Batu Pahat 86400, Johor, Malaysia
来源：
INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME2018) | 2019年 / 1150卷
关键词：
NICKEL-BASED SUPERALLOY; SURFACE INTEGRITY; LIFE;
D O I：
10.1088/1742-6596/1150/1/012046
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Inconel 718 is known for being a difficult to cut material, this is due to its high strength at high temperatures, low thermal conductivity and high work hardening. These excellent properties makes Inconel 718 suitable for high temperature applications. This paper presents a study on the effects of the radial depth of cut on the cutting force variations and tool wear propagation in the first cut using TiAlN coated inserts as the cutting tool. The machining operation conducted was side milling at cutting speeds of 80m/min, 100m/min and 120 m/min. The results obtained shows that the cutting forces and tool wear increase with increasing radial depth of cut.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] The Investigation of Tool Wear in High Speed Cutting INCONEL718
    Zhou, J.
    Han, R. D.
    [J]. ADVANCES IN FUNCTIONAL MANUFACTURING TECHNOLOGIES, 2010, 33 : 347 - 350
  • [32] Effect of tool wear on the surface integrity of Inconel 718 in face milling with cemented carbide tools
    Oliveira, A. R. F.
    da Silva, L. R. R.
    Baldin, V
    Fonseca, M. P. C.
    Silva, R. B.
    Machado, A. R.
    [J]. WEAR, 2021, 476 (476)
  • [33] Effect Tool Wear during End Milling on the Surface Integrity and Fatigue Life of Inconel 718
    Li, W.
    Guo, Y. B.
    Barkey, M. E.
    Jordon, J. B.
    [J]. 6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 2014, 14 : 546 - 551
  • [34] Inverse analysis of the cutting force in laser-assisted milling on Inconel 718
    Yixuan Feng
    Yu-Ting Lu
    Yu-Fu Lin
    Tsung-Pin Hung
    Fu-Chuan Hsu
    Chiu-Feng Lin
    Ying-Cheng Lu
    Steven Y. Liang
    [J]. The International Journal of Advanced Manufacturing Technology, 2018, 96 : 905 - 914
  • [35] Inverse analysis of the cutting force in laser-assisted milling on Inconel 718
    Feng, Yixuan
    Lu, Yu-Ting
    Lin, Yu-Fu
    Hung, Tsung-Pin
    Hsu, Fu-Chuan
    Lin, Chiu-Feng
    Lu, Ying-Cheng
    Liang, Steven Y.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (1-4): : 905 - 914
  • [36] Cutting forces in the end milling of Inconel 718
    Alauddin, M
    Mazid, MA
    El Baradi, MA
    Hashmi, MSJ
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 77 (1-3) : 153 - 159
  • [37] Cutting Performance of a Longitudinal and Torsional Ultrasonic Vibration Tool in Milling of Inconel 718
    Zhang, Hang
    Su, Guosheng
    Xia, Yan
    Zhang, Peirong
    Li, Binxun
    Sun, Yujing
    Du, Jin
    Fang, Bin
    [J]. COATINGS, 2024, 14 (06)
  • [38] Tool wear area estimation through in-process edge force coefficient in trochoidal milling of Inconel 718
    Shah, Aash M.
    Agarwal, Ankit
    Mears, Laine
    [J]. MANUFACTURING LETTERS, 2023, 35 : 391 - 398
  • [39] Temperature variation in the workpiece and in the cutting tool when dry milling Inconel 718
    G. Le Coz
    D. Dudzinski
    [J]. The International Journal of Advanced Manufacturing Technology, 2014, 74 : 1133 - 1139
  • [40] Temperature variation in the workpiece and in the cutting tool when dry milling Inconel 718
    Le Coz, G.
    Dudzinski, D.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 74 (5-8): : 1133 - 1139
12345