Cutting forces in the end milling of Inconel 718

被引：79
|
作者：
Alauddin, M
Mazid, MA
El Baradi, MA [1 ]
Hashmi, MSJ
机构：
[1] Dublin City Univ, Sch Mech & Mfg Engn, Dublin 9, Ireland
[2] BIT, Dept Mech Engn, Gazipur, Bangladesh
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 1998年 / 77卷 / 1-3期
关键词：
cutting forces; milling modes; nickel-base alloy;
D O I：
10.1016/S0924-0136(97)00412-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Inconel 718 is a nickel-base alloy that is difficult to machine, a high cutting force being generated in the machining of this advanced material. This paper presents a study of the influence of the machining conditions on the average cutting forces for half-immersion end milling in the up-and down-milling modes. The cutting tests were carried out under dry conditions using carbide inserts. (C) 1998 Elsevier Science S.A. All rights reserved.
引用
收藏
页码：153 / 159
页数：7
相关论文
共 50 条
  • [1] Cutting forces in the milling of Inconel 718
    Liu, G
    He, N
    Man, ZL
    Li, L
    [J]. ADVANCES IN GRINDING AND ABRASIVE PROCESSES, 2004, 259-2 : 824 - 828
  • [2] Modelling of cutting force in end milling Inconel 718
    Alauddin, M
    ElBaradie, MA
    Hashmi, MSJ
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 58 (01) : 100 - 108
  • [3] Residual stresses and cutting forces in cryogenic milling of Inconel 718
    Oliveira, Gleiton de Paula
    Fonseca, Maria Cindra
    Araujo, Anna Carla
    [J]. 8TH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC 2018), 2018, 77 : 211 - 214
  • [4] Cutting Forces during Inconel 718 Orthogonal Turn-Milling
    Felusiak-Czyryca, Agata
    Madajewski, Marek
    Twardowski, Pawel
    Wiciak-Pikula, Martyna
    [J]. MATERIALS, 2021, 14 (20)
  • [5] Analytical modeling of chip geometry and cutting forces in helical ball end milling of superalloy Inconel 718
    Sonawane, Harshad A.
    Joshi, Suhas S.
    [J]. CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2010, 3 (03) : 204 - 217
  • [6] A study of cutting forces in high-speed dry milling of Inconel 718
    Li, Huaizhong
    Wang, Jun
    [J]. ADVANCES IN MATERIALS PROCESSING X, 2012, 500 : 105 - 110
  • [7] Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
    Zhang, S.
    Li, J. F.
    Wang, Y. W.
    [J]. JOURNAL OF CLEANER PRODUCTION, 2012, 32 : 81 - 87
  • [8] An investigation on the cutting force of milling Inconel 718
    Tsai, Jhy-Cherng
    Kuo, Chung-Yu
    Liu, Zing-Ping
    Hsiao, Kelvin Hsi-Hung
    [J]. SIXTH INTERNATIONAL MULTI-CONFERENCE ON ENGINEERING AND TECHNOLOGY INNOVATION 2017 (IMETI 2017), 2018, 169
  • [9] Optimal cutting parameters for desired surface roughness in end milling Inconel 718
    Wang, Yuanwei
    Zhang, Song
    Li, Jianfeng
    Ding, Tongchao
    [J]. ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 911 - 916
  • [10] CUTTING FORCES, TOOL LIFE, AND SIZE EFFECT OF PASSIVATED CUTTERS IN MILLING OF INCONEL 718
    Ren, Junxue
    Xu, Yingying
    Liang, Yongshou
    Yao, Changfeng
    Shao, Guangpeng
    [J]. PROCEEDINGS OF THE 2014 INTERNATIONAL CONFERENCE ON INNOVATIVE DESIGN AND MANUFACTURING (ICIDM), 2014, : 149 - 154
12345