Comparative Analysis of Different Starter Driven Gear Materials Using Finite Element Method

被引：0
|
作者：
Andoko [1 ]
Rohmad, S. N. [1 ]
机构：
[1] Univ Negeri Malang, Dept Mech Engn, Malang 65145, Indonesia
来源：
INTERNATIONAL CONFERENCE ON CONDENSED MATTERS AND ADVANCED MATERIALS (IC2MAM 2018) | 2019年 / 515卷
关键词：
ANSYS; comparative study; FEM; gear; stress;
D O I：
10.1088/1757-899X/515/1/012101
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Gear is an essential element in motor vehicles. Bending stress and gear surface strength are two factors contributing to a gear failure. Therefore, calculating precisely the bending stress and total deformation of the gear tooth is profoundly important for the development of modern gear design industry. This study aimed to investigate the strength, deformation, and crack in gears. The Finite Element Method (FEM) was used in the ANSYS simulation. The simulation was performed on three gear materials, i.e. alloy steel, structural steel, and carbon steel. The results showed that among the three materials, the highest strength with the equivalent stress of 921.63 MPa was structural steel, with the maximum principal stress of 407.33 MPa and maximum shear stress of 407.33 MPa.
引用
收藏
页数：7
相关论文
共 50 条
  • [41] Stress reduction in a gear tooth using photoelasticity and finite element analysis
    A. Ahlqvist
    I. Ionescu
    F. A. Moslehy
    Experimental Techniques, 2001, 25 : 19 - 21
  • [42] Frictional Tooth Contact Analysis along Line of Action of a Spur Gear using Finite Element Method
    Patil, Santosh
    Karuppanan, Saravanan
    Atanasovska, Ivana
    Wahab, Azmi A.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 1801 - 1809
  • [43] Torque sensitivity analysis for triple-speed coaxial magnetic gear using finite element method
    Moghimi, Ali
    Hosseini Aliabadi, Mahmood
    Feshki Farahani, Hassan
    IET ELECTRIC POWER APPLICATIONS, 2021, 15 (04) : 405 - 414
  • [44] Design, Analysis and Modification of 3 Stage Helical Gearbox Casing Using Finite Element Method Considering Different Materials
    Gandhi, Ronak D.
    Patel, Nimeshchandra S.
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON INTELLIGENT MANUFACTURING AND AUTOMATION (ICIMA 2018), 2019, : 99 - 114
  • [45] Thermal Stress Analysis of Maxillary Dentures with Different Reinforcement Materials Under Occlusal Load Using Finite Element Method
    Benli, Semih
    Bas, Gokhan
    APPLIED SCIENCES-BASEL, 2024, 14 (22):
  • [46] Damping behaviour of different materials in fretting contact - Experiment and simulation using finite element method
    Kugler, Marion
    Rödiger, Silas
    Könke, Carsten
    Dienwiebel, Martin
    Tribologie und Schmierungstechnik, 2024, 71 (04): : 5 - 10
  • [47] Dynamic modeling of parallel shaft gear transmissions using finite element method
    Chang, Lehao
    He, Zhaoxia
    Liu, Geng
    Zhendong yu Chongji/Journal of Vibration and Shock, 2016, 35 (20): : 47 - 53
  • [48] EFFECT OF MACHINING ERRORS ON THE GEAR ENGAGEMENT USING CONTACT FINITE ELEMENT METHOD
    Zhang, Tao
    Wang, Jianjun
    Wu, Yongjun
    Zhang, Haiying
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 7B, 2015,
  • [49] Finite Element Analysis of a Certain Reducer Gear
    Qian, Wenxue
    Yin, Xiaowei
    Xie, Liyang
    PROGRESS IN MEASUREMENT AND TESTING, PTS 1 AND 2, 2010, 108-111 : 1066 - +
  • [50] The Spline Function Method and Finite Element Analysis of Double Circular Arc Gear
    Liu Jian-xiu
    Liu Yu-lin
    Lu Zhong-ning
    Li An-sheng
    Liu Yong-jun
    2007 SECOND INTERNATIONAL CONFERENCE ON BIO-INSPIRED COMPUTING: THEORIES AND APPLICATIONS, 2007, : 269 - 274
12345