Comparative Analysis of Different Starter Driven Gear Materials Using Finite Element Method

被引：0
|
作者：
Andoko [1 ]
Rohmad, S. N. [1 ]
机构：
[1] Univ Negeri Malang, Dept Mech Engn, Malang 65145, Indonesia
来源：
INTERNATIONAL CONFERENCE ON CONDENSED MATTERS AND ADVANCED MATERIALS (IC2MAM 2018) | 2019年 / 515卷
关键词：
ANSYS; comparative study; FEM; gear; stress;
D O I：
10.1088/1757-899X/515/1/012101
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Gear is an essential element in motor vehicles. Bending stress and gear surface strength are two factors contributing to a gear failure. Therefore, calculating precisely the bending stress and total deformation of the gear tooth is profoundly important for the development of modern gear design industry. This study aimed to investigate the strength, deformation, and crack in gears. The Finite Element Method (FEM) was used in the ANSYS simulation. The simulation was performed on three gear materials, i.e. alloy steel, structural steel, and carbon steel. The results showed that among the three materials, the highest strength with the equivalent stress of 921.63 MPa was structural steel, with the maximum principal stress of 407.33 MPa and maximum shear stress of 407.33 MPa.
引用
收藏
页数：7
相关论文
共 50 条
  • [21] MODAL AND HARMONIC ANALYSIS OF GIRTH GEAR WITH DUAL MESH PINIONS BY USING FINITE ELEMENT METHOD
    Venkataraman, Venkatesan
    Keppanan, Malar Mohan
    Dhanasekaran, Vinoth
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 4, 2020,
  • [22] Modeling, Design, and Sensitivity Analysis of a Continuous Magnetic Gear Using Finite-Element Method
    Majidi, Behrooz
    Milimonfared, Jafar
    ELECTRIC POWER COMPONENTS AND SYSTEMS, 2016, 44 (09) : 1029 - 1039
  • [23] Investigation of Structural and Modal Analysis of a Wind Turbine Planetary Gear Using Finite Element Method
    Mohsine, Abdellah
    El Mostapha, Boudi
    El Marjani, Abdellatif
    INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH, 2018, 8 (02): : 752 - 760
  • [24] Analysis of machining errors' effects on gear pair meshing using contact finite element method
    Zhang, Tao
    Wu, Yong-Jun
    Wu, Jing
    Wang, Jian-Jun
    Zhendong yu Chongji/Journal of Vibration and Shock, 2015, 34 (03): : 43 - 50
  • [25] Investigation of structural and modal analysis of a wind turbine planetary gear using finite element method
    Mohsine, Abdellah (mohsine.abdellah@gmail.com), 2018, International Journal of Renewable Energy Research (08):
  • [26] Analysis of the nominal load effects on gear load capacity using the finite-element method
    Atanasovska, I.
    Mitrovic, R.
    Momcilovic, D.
    Subic, A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2010, 224 (C11) : 2539 - 2548
  • [27] Analysis of the effects of different materials in a tooth implant-supported fixed prosthesis using finite element method
    Dargahi, J
    Najarian, S
    Talebi, M
    BIO-MEDICAL MATERIALS AND ENGINEERING, 2005, 15 (04) : 317 - 331
  • [28] Numerical simulation of gear surface hardening using the finite element method
    He, Bin
    Huang, Shan
    He, Xiaolin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 74 (5-8): : 665 - 672
  • [29] Numerical simulation of gear surface hardening using the finite element method
    Bin He
    Shan Huang
    Xiaolin He
    The International Journal of Advanced Manufacturing Technology, 2014, 74 : 665 - 672
  • [30] Evaluation of spur gear mesh compliance using the finite element method
    Arafa, MH
    Megahed, MM
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1999, 213 (06) : 569 - 579
12345