Effects of anodic oxidation treatment for three dimensional carbon fibre braided fabric on properties of its composite

被引：4
|
作者：
Huang, YD [1 ]
Cao, HL [1 ]
Zhang, ZQ [1 ]
机构：
[1] Harbin Inst Technol, Fac Sci, Dept Appl Chem, Harbin 150001, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2001年 / 17卷 / 11期
关键词：
D O I：
10.1179/026708301101509476
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An anodic oxidation treatment method is developed in this paper which is capable of modifying the surfaces of carbon fibres in three-dimensional (3D) braided fabrics conveniently and uniformly. The results on the utilisation of this method in the surface treatment of 3D carbon fibre braided fabrics are presented. The effects of anodic oxidation treatment of 3D fabrics on the properties of phenolic resin composites are analysed and discussed. By appropriate treatment, the interfacial shear strength and compressive strength may be improved by 20% and 59.3% respectively. As far as the impact properties of the composites are concerned, the crack initiation energy was increased and the crack propagation energy decreased. Concerning ablative properties of the composites, the linear ablative rate was decreased by 10.7% and the maximum temperature of the underside of the ablative section was reduced by 2.7%.
引用
收藏
页码：1459 / 1464
页数：6
相关论文
共 50 条
  • [21] Bending properties of three-dimensional braided composite T-beam at low temperature
    Liu J.
    Liu K.
    Ning B.
    Sun B.
    Zhang W.
    [J]. Fangzhi Xuebao/Journal of Textile Research, 2019, 40 (12): : 57 - 62
  • [22] Study on Manufacture Technology and Mechanical Properties of Three Dimensional Braided Composite Support with Irregular Shape
    Sun, Ying
    Yang, Jian
    He, Yehong
    Li, Jialu
    [J]. ADVANCED ENGINEERING MATERIALS, PTS 1-3, 2011, 194-196 : 1417 - +
  • [23] Mechanical and morphological properties of carbon fibre and its composite for biomaterials' application
    Abdullah, Abdul Manaf
    Mohamad, Dasmawati
    Akil, Hazizan Md
    Abdullah, Nurul Asma
    [J]. APPLIED NANOSCIENCE, 2022, 12 (11) : 3167 - 3176
  • [24] Mechanical and morphological properties of carbon fibre and its composite for biomaterials’ application
    Abdul Manaf Abdullah
    Dasmawati Mohamad
    Hazizan Md Akil
    Nurul Asma Abdullah
    [J]. Applied Nanoscience, 2022, 12 : 3167 - 3176
  • [25] Preparation and oxidation behavior of a double-layer coating for three-dimensional braided carbon fiber
    Wang, Jingjing
    Lin, Wensong
    Wu, Xiao
    Yang, Yayun
    Wu, Fen
    Yan, Xuezeng
    [J]. SURFACE & COATINGS TECHNOLOGY, 2016, 298 : 58 - 63
  • [26] Moisture absorption in a three-dimensional braided carbon/Kevlar/epoxy hybrid composite for orthopaedic usage and its influence on mechanical performance
    Wan, Y. Z.
    Wang, Y. L.
    Huang, Y.
    Luo, H. L.
    He, F.
    Chen, G. C.
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (09) : 1480 - 1484
  • [27] Effects of the air oxidation of carbon fibers on the properties of 3-D braided carbon/resin composites
    Wang, Yu-Guo
    Wu, Guang-Shun
    [J]. Xinxing Tan Cailiao/ New Carbon Materials, 2007, 22 (01): : 88 - 91
  • [28] Effects of the air oxidation of carbon fibers on the properties of 3-D braided carbon/resin composites
    Wang Yu-guo
    Wu Guang-shun
    [J]. NEW CARBON MATERIALS, 2007, 22 (01) : 88 - 91
  • [29] Influence of fibre surface oxidation treatment on mechanical interfacial properties of carbon fibre/polyarylacetylene composites
    Fu, HJ
    Huang, YD
    Liu, L
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (12) : 1655 - 1660
  • [30] Carbon nanofiber treatment effects on composite properties
    Burton, DJ
    Glasgow, DG
    Kwag, CY
    Lake, ML
    [J]. ADVANCED FIBERS, PLASTICS, LAMINATES AND COMPOSITES, 2002, 702 : 185 - 192
12345