Moisture absorption in a three-dimensional braided carbon/Kevlar/epoxy hybrid composite for orthopaedic usage and its influence on mechanical performance

被引：31
|
作者：
Wan, Y. Z.
Wang, Y. L.
Huang, Y.
Luo, H. L.
He, F.
Chen, G. C.
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin 300072, Peoples R China
[2] Aerosp Res Inst Mat & Proc Technol, Beijing 100076, Peoples R China
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2006年 / 37卷 / 09期
关键词：
three-dimensional reinforcement; carbon fibre; Kevlar fibre; environmental degradation;
D O I：
10.1016/j.compositesa.2005.09.009
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Investigation was carried out concerning moisture absorption behavior of a three-dimensional (3D) braided carbon/Kevlar/epoxy hybrid composite by immersing in Hank's solution at 37 degrees C for up to 1700 h. Sorption curves were obtained and characteristic parameters D (diffusion coefficient), k (sorption rate), and M-e (maximum moisture content) were determined. Similar to two non-hybrid composites, the moisture absorption of the 3D hybrid composite followed a Fickian behavior and no hybrid effect on D, k, or M-e was found. The influence of moisture uptake on the flexural and shear properties was examined and discussed in this work. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1480 / 1484
页数：5
相关论文
共 50 条
  • [1] Characterization of three-dimensional braided carbon/Kevlar hybrid composites for orthopedic usage
    Wan, YZ
    Chen, GC
    Huang, Y
    Li, QY
    Zhou, FG
    Xin, JY
    Wang, YL
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 398 (1-2): : 227 - 232
  • [2] Preparation and characterization of three-dimensional braided carbon/Kevlar/epoxy hybrid composites
    Wan, Y. Z.
    Lian, J. J.
    Huang, Y.
    He, F.
    Wang, Y. L.
    Jiang, H. J.
    Xin, J. Y.
    [J]. JOURNAL OF MATERIALS SCIENCE, 2007, 42 (04) : 1343 - 1350
  • [3] Preparation and characterization of three-dimensional braided carbon/Kevlar/epoxy hybrid composites
    Y. Z. Wan
    J. J. Lian
    Y. Huang
    F. He
    Y. L. Wang
    H. J. Jiang
    J. Y. Xin
    [J]. Journal of Materials Science, 2007, 42 : 1343 - 1350
  • [4] Mechanical performance of hybrid bismaleimide composites reinforced with three-dimensional braided carbon and Kevlar fabrics
    Wan, Y. Z.
    Wang, Y. L.
    He, F.
    Huang, Y.
    Jiang, H. J.
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (02) : 495 - 504
  • [5] Moisture sorption and mechanical degradation of VARTMed three-dimensional braided carbon-epoxy composites
    Wan, YZ
    Wang, YL
    Huang, Y
    Zhou, FG
    He, BM
    Chen, GC
    Han, KY
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (7-8) : 1237 - 1243
  • [6] Tribological properties of three-dimensional braided carbon/Kevlar/epoxy hybrid composites under dry and lubricated conditions
    Wan, Y. Z.
    Huang, Y.
    He, F.
    Li, Q. Y.
    Lian, J. J.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 452 : 202 - 209
  • [7] Moisture absorption in VARTMed three-dimensional braided carbon-epoxy composites with different interface conditions
    Luo, H. L.
    Lian, J. J.
    Wan, Y. Z.
    Huang, Y.
    Wang, Y. L.
    Jiang, H. J.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 425 (1-2): : 70 - 77
  • [8] Moisture sorption of a three-dimensional braided carbon fiber-epoxy composite under different media
    Wan, YZ
    Han, KY
    Wang, YL
    Huang, Y
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2005, 97 (02) : 507 - 512
  • [9] Influence of moisture absorption on fracture toughness of Kevlar fabric/epoxy composite
    Ravi, S.
    Iyengar, N.G.R.
    Agarwal, B.D.
    [J]. Journal of the Institution of Engineers (India): Aerospace Engineering Journal, 1995, 76 : 23 - 28
  • [10] Mechanical behavior of three dimension braided carbon/epoxy composite
    Lu, G.
    Guoquan, Z.
    Fan, C.
    Shanyuan, Z.
    Yang, J.
    [J]. DYMAT 2009: 9TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, VOL 2, 2009, : 1173 - +
12345