Moisture absorption in a three-dimensional braided carbon/Kevlar/epoxy hybrid composite for orthopaedic usage and its influence on mechanical performance

被引：31
|
作者：
Wan, Y. Z.
Wang, Y. L.
Huang, Y.
Luo, H. L.
He, F.
Chen, G. C.
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin 300072, Peoples R China
[2] Aerosp Res Inst Mat & Proc Technol, Beijing 100076, Peoples R China
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2006年 / 37卷 / 09期
关键词：
three-dimensional reinforcement; carbon fibre; Kevlar fibre; environmental degradation;
D O I：
10.1016/j.compositesa.2005.09.009
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Investigation was carried out concerning moisture absorption behavior of a three-dimensional (3D) braided carbon/Kevlar/epoxy hybrid composite by immersing in Hank's solution at 37 degrees C for up to 1700 h. Sorption curves were obtained and characteristic parameters D (diffusion coefficient), k (sorption rate), and M-e (maximum moisture content) were determined. Similar to two non-hybrid composites, the moisture absorption of the 3D hybrid composite followed a Fickian behavior and no hybrid effect on D, k, or M-e was found. The influence of moisture uptake on the flexural and shear properties was examined and discussed in this work. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1480 / 1484
页数：5
相关论文
共 50 条
  • [31] Characterization of dielectric properties of three-dimensional basalt-Kevlar epoxy hybrid composites using waveguide method
    Yao Lan
    Wang Xin
    Hu Bin
    Feng Yan
    Liang Fei
    Mo Jiaquan
    Qiu Yiping
    [J]. PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS VOLS 1 AND 2, 2007, : 426 - 427
  • [32] Moisture Absorption Behavior and Its Effect on the Mechanical Properties of Jute-Reinforced Epoxy Composite
    Raghavendra, Gujjala
    Kumar, Kankanala Anil
    Kumar, Merum Harsha
    RaghuKumar, Bhukya
    Ojha, Shakuntala
    [J]. POLYMER COMPOSITES, 2017, 38 (03) : 516 - 522
  • [33] Three-dimensional porosity characterization in carbon/glass fiber epoxy hybrid composites
    Maciel Monticeli, Francisco
    Ornaghi Jr, Heitor Luiz
    Cornelis Voorwald, Herman Jacobus
    Hilario Cioffi, Maria Odila
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, 125
  • [34] Influence of moisture absorption on mechanical properties of kenaf/glass reinforced polyester hybrid composite
    Mishra, Chandrakanta
    Deo, Chitta Ranjan
    Baskey, Smitismita
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 2596 - 2600
  • [35] Progressive damage analysis of three-dimensional hybrid braided composite under short beam shear loading
    Wu, Liwei
    Zhao, Feng
    Li, Yuanyuan
    Sun, Xiaojun
    Liu, Shengkai
    Jiang, Qian
    [J]. COMPOSITE STRUCTURES, 2023, 313
  • [36] Mechanical characterization of quasi-isotropic intra-ply woven carbon-Kevlar/epoxy hybrid composite
    Agarwal, Sovit
    Pai, Yogeesha
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 52 : 971 - 978
  • [37] Influence of natural fibers on mechanical, thermal, water absorption and morphological characteristics of Kevlar hybrid epoxy composites for shipbuilding application
    Dinesha, S.
    Elanchezhian, C.
    Vijayaramnath, B.
    Adinarayanan, A.
    [J]. INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2022, 29 (04) : 526 - 533
  • [38] Experimental study on the mechanical properties of three-dimensional braided composite circular tubes with preembedded licker-in
    Luo, Haibo
    Wang, Qian
    Yang, Yanchu
    He, Xiaohui
    Feng, Hui
    Nie, Ying
    Li, Tao
    [J]. POLYMER COMPOSITES, 2023, 44 (09) : 5433 - 5449
  • [39] Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under lubricated sliding conditions
    Wan, YZ
    Luo, HL
    Wang, YL
    Huang, Y
    Li, QY
    Zhou, FG
    [J]. JOURNAL OF MATERIALS SCIENCE, 2005, 40 (17) : 4475 - 4481
  • [40] Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under dry sliding conditions
    Wan, Y. Z.
    Chen, G. C.
    Raman, S.
    Xin, J. Y.
    Li, Q. Y.
    Huang, Y.
    Wang, Y. L.
    Luo, H. L.
    [J]. WEAR, 2006, 260 (9-10) : 933 - 941
12345