Wear of abrasive media and its effect on abrasive flow machining results

被引：54

作者：

Bremerstein, Tina ^{[1
]}

Potthoff, Annegret ^{[1
]}

Michaelis, Alexander ^{[1
]}

Schmiedel, Christian ^{[2
]}

Uhlmann, Eckart ^{[2
]}

Blug, Bernhard ^{[3
]}

Amann, Tobias ^{[3
]}

机构：

[1] Fraunhofer IKTS, D-01277 Dresden, Germany

[2] Fraunhofer IPK, D-10587 Berlin, Germany

[3] Fraunhofer IWM, D-79108 Freiburg, Germany

来源：

WEAR | 2015年 / 342卷

关键词：

Abrasive flow machining; Abrasion; Wear; Rheology; Particle shape; Steel; RHEOLOGICAL CHARACTERIZATION; PERFORMANCE;

D O I：

10.1016/j.wear.2015.08.013

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Abrasive media were examined before and after application in abrasive flow machining to evaluate the wear of media due to the machining process. Both media were tested on workpieces under the same working conditions to study the effect of abrasive media wear on the results of the machining process. With the help of rheological and granulometric characterisation methods, it has been shown that alterations of rheological behaviour and composition of the abrasive medium as well as particle shape and size are responsible for the degradation of the abrasive efficiency. The increasing viscosity of the abrasive medium and progressing rounding of the large abrasive particles as a result of the machining process are the main factors that cause a decreased material removal rate and reduced surface quality. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：44 / 51

页数：8

共 50 条

[41] A review of abrasive flow machining research
Yang, L. F.
Zhang, X. R.
Liu, W. N.
INFORMATION TECHNOLOGY AND COMPUTER APPLICATION ENGINEERING, 2014, : 181 - 184
[42] SOME STUDIES ON PERFORMANCE OF A NATURAL POLYMER MEDIA FOR ABRASIVE FLOW MACHINING
Rajesha, S.
Sharma, A. K.
Kumar, Pradeep
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2011, : 333 - 340
[43] Hardness Effects on Abrasive Flow Machining
Gov, Kursad
Eyercioglu, Omer
Cakir, Mehmed Veysel
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2013, 59 (10): : 626 - 631
[44] Fundamentals and technology of abrasive flow machining
Uhlmann, E
Szulczynski, H
MICROENGINEERING 99, PROCEEDINGS, 1999, : 274 - 274
[45] EFFECT OF LUBRICANT ON ABRASIVE WEAR
SASADA, T
OIKE, M
JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1982, 27 (09): : 703 - 708
[46] MAGNETIC EFFECT ON ABRASIVE WEAR
KUMAGAI, K
KAMIYA, O
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 1989, 34 (07) : 524 - 529
[47] Temperature Dependence and Effect on Surface Roughness in Abrasive Flow Machining
Song, G. Z.
Li, Y. Z.
Ya, G.
SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING, 2008, 53-54 : 375 - 380
[48] EQUIPMENT FOR WEAR TESTING IN AN ABRASIVE FLOW
AVERCHEN.PA
PLESKACH, VM
TOMILO, VV
INDUSTRIAL LABORATORY, 1969, 35 (10): : 1532 - &
[49] Abrasive Wear Resistance of Powder Composites at Abrasive Erosion and Abrasive Impact Wear
Kulu, Priit
Veinthal, Renno
Kaeerdi, Helmo
Tarbe, Riho
MATERIALS SCIENCE-MEDZIAGOTYRA, 2008, 14 (04): : 328 - 332
[50] ABRASIVE WEAR IN MACHINING - EXPERIMENTS WITH MATERIALS OF CONTROLLED MICROSTRUCTURE
RAMALINGAM, S
WRIGHT, PK
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1981, 103 (02): : 151 - 156

← 1 2 3 4 5 →