Wear of abrasive media and its effect on abrasive flow machining results

被引：54

作者：

Bremerstein, Tina ^{[1
]}

Potthoff, Annegret ^{[1
]}

Michaelis, Alexander ^{[1
]}

Schmiedel, Christian ^{[2
]}

Uhlmann, Eckart ^{[2
]}

Blug, Bernhard ^{[3
]}

Amann, Tobias ^{[3
]}

机构：

[1] Fraunhofer IKTS, D-01277 Dresden, Germany

[2] Fraunhofer IPK, D-10587 Berlin, Germany

[3] Fraunhofer IWM, D-79108 Freiburg, Germany

来源：

WEAR | 2015年 / 342卷

关键词：

Abrasive flow machining; Abrasion; Wear; Rheology; Particle shape; Steel; RHEOLOGICAL CHARACTERIZATION; PERFORMANCE;

D O I：

10.1016/j.wear.2015.08.013

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Abrasive media were examined before and after application in abrasive flow machining to evaluate the wear of media due to the machining process. Both media were tested on workpieces under the same working conditions to study the effect of abrasive media wear on the results of the machining process. With the help of rheological and granulometric characterisation methods, it has been shown that alterations of rheological behaviour and composition of the abrasive medium as well as particle shape and size are responsible for the degradation of the abrasive efficiency. The increasing viscosity of the abrasive medium and progressing rounding of the large abrasive particles as a result of the machining process are the main factors that cause a decreased material removal rate and reduced surface quality. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：44 / 51

页数：8

共 50 条

[31] A review on magnetically assisted abrasive flow machining and abrasive material type
Singh, Palwinder
Singh, Lakhvir
Singh, Sehijpal
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022, 236 (06) : 2765 - 2781
[32] Development and characterization of xanthan gum-based abrasive media and performance analysis using abrasive flow machining
Dixit, Nitin
Sharma, Varun
Kumar, Pradeep
JOURNAL OF MANUFACTURING PROCESSES, 2021, 67 : 101 - 115
[33] Determining dynamically active abrasive particles in the media used in centrifugal force assisted abrasive flow machining process
R. S. Walia
H. S. Shan
P. Kumar
The International Journal of Advanced Manufacturing Technology, 2008, 38 : 1157 - 1164
[34] New directions for abrasive flow machining
Rhoades, L
Gilmore, J
ABRASIVE TECHNOLOGY: CURRENT DEVELOPMENT AND APPLICATIONS I, 1999, : 307 - 317
[35] Simulation of the abrasive flow machining process
Schmitt, Joachim
Diebels, Stefan
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 2013, 93 (2-3): : 147 - 153
[36] Force behaviour in abrasive flow machining
Mahdy, MAM
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2002, 17 (07): : 618 - 642
[37] Performance study of a natural polymer based media for abrasive flow machining
Rajesha, S.
Venkatesh, G.
Sharma, A. K.
Kumar, Pradeep
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2010, 17 (06) : 407 - 413
[38] Fatigue performance in Abrasive Flow Machining
Cherian, Jose
Issac, Jeoju M.
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 354 - +
[39] Determining dynamically active abrasive particles in the media used in centrifugal force assisted abrasive flow machining process
Walia, R. S.
Shan, H. S.
Kumar, P.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 38 (11-12): : 1157 - 1164
[40] A Review on Abrasive Flow Machining (AFM)
Kumar, Santhosh S.
Hiremath, Somashekhar S.
1ST GLOBAL COLLOQUIUM ON RECENT ADVANCEMENTS AND EFFECTUAL RESEARCHES IN ENGINEERING, SCIENCE AND TECHNOLOGY - RAEREST 2016, 2016, 25 : 1297 - 1304

← 1 2 3 4 5 →