The preparation of NASICON-type solid electrolyte lithium-ion Li1+xALxGe0.2Ti1.8-x(PO4)3 by conventional solid-state method

被引：4
|
作者：
Shang, X. F. [1 ]
Zhang, J. H. [1 ]
Cheng, S. [1 ]
Wang, Y. W. [1 ]
机构：
[1] Jiangsu Univ, Fac Sci, Dept Phys, Zhenjiang 212013, Jiangsu, Peoples R China
来源：
2ND INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND MECHANICAL ENGINEERING (IWMSME2018) | 2019年 / 504卷
基金：
中国国家自然科学基金;
关键词：
ELECTRICAL-PROPERTIES; GLASS-CERAMICS; CONDUCTIVITY; NA; GE; SN;
D O I：
10.1088/1757-899X/504/1/012045
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
NASICON-type lithium-ion conducting solid electrolyte for Li1+xAlxGe0.2Ti1.8-x(PO4)(3) were prepared with solid-state method at 900 degrees C for 7 h. In this paper, we have studied the property of Li1+xAlxGe0.2Ti1.8-x(PO4)(3) solid electrolyte systems with various numbers of Al replaced Ti. The highest total electrical conductivity of the sintered pellets for Li1.45Al0.45Ge0.2Ti1.35(PO4)(3) at 25 degrees C was 1.0 x 10(-3) S/cm, which has NASICON-type crystalline structure without impurity phase. And the sintered pellet as x=0.45 in Li1+xAlxGe0.2Ti1.8-x(PO4)(3) systems also has highest relative density of 95.6% and highest three-point strength of 90 N mm(-2), respectively.
引用
收藏
页数：7
相关论文
共 50 条
  • [31] Electromechanical Failure of NASICON-Type Solid-State Electrolyte-Based All-Solid-State Li-Ion Batteries
    He, Linchun
    Oh, Jin An Sam
    Watarai, Kenta
    Morita, Masato
    Zhao, Yue
    Sun, Qiaomei
    Sakamoto, Tetsuo
    Lu, Li
    Adams, Stefan
    CHEMISTRY OF MATERIALS, 2021, 33 (17) : 6841 - 6852
  • [32] Water-stable lithium ion conducting solid electrolyte of the Li1.4Al0.4Ti1.6-xGex(PO4)3 system (x=0-1.0) with NASICON-type structure
    Zhang, Peng
    Matsui, Masaki
    Hirano, Atsushi
    Takeda, Yasuo
    Yamamoto, Osamu
    Imanishi, Nobuyuki
    SOLID STATE IONICS, 2013, 253 : 175 - 180
  • [33] Water-stable lithium ion conducting solid electrolyte of iron and aluminum doped NASICON-type LiTi2(PO4)3
    Zhang, P.
    Matsui, M.
    Takeda, Y.
    Yamamoto, B.
    Imanishi, N.
    SOLID STATE IONICS, 2014, 263 : 27 - 32
  • [34] Spray-Flame Synthesis of NASICON-Type Rhombohedral (α) Li1+xYxZr2-x(PO4)3 [x=0-0.2] Solid Electrolytes
    Ali, Md Yusuf
    Chen, Tianyu
    Orthner, Hans
    Wiggers, Hartmut
    NANOMATERIALS, 2024, 14 (15)
  • [35] Synthesis and optimization of NASICON-type Li3V2(PO4)3 by adipic acid-mediated solid-state approach
    J. N. Son
    S. H. Kim
    M. C. Kim
    K. J. Kim
    V. Aravindan
    W. I. Cho
    Y. S. Lee
    Journal of Applied Electrochemistry, 2013, 43 : 583 - 593
  • [36] Synthesis and optimization of NASICON-type Li3V 2(PO4)3 by adipic acid-mediated solid-state approach
    Lee, Y.S. (leeys@chonnam.ac.kr), 1600, Kluwer Academic Publishers (43):
  • [37] Synthesis and optimization of NASICON-type Li3V2(PO4)3 by adipic acid-mediated solid-state approach
    Son, J. N.
    Kim, S. H.
    Kim, M. C.
    Kim, K. J.
    Aravindan, V.
    Cho, W. I.
    Lee, Y. S.
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 2013, 43 (06) : 583 - 593
  • [38] High lithium ion conductivity solid electrolyte of chromium and aluminum co-doped NASICON-type LiTi2(PO4)3
    Zhang, P.
    Wang, H.
    Si, Q.
    Matsui, M.
    Takeda, Y.
    Yamamoto, O.
    Imanishi, N.
    SOLID STATE IONICS, 2015, 272 : 101 - 106
  • [39] Preparation of lithium ion conducting solid electrolyte of NASICON-type Li1+xAlxTi2-x(PO4)3 (x=0.3) obtained by using the mechanochemical method and its application as surface modification materials of LiCoO2 cathode for lithium cell
    Morimoto, Hideyuki
    Awano, Hiroyuki
    Terashima, Junpei
    Shindo, Yohei
    Nakanishi, Shinji
    Ito, Nobukiyo
    Ishikawa, Kiyotaka
    Tobishima, Shin-ichi
    JOURNAL OF POWER SOURCES, 2013, 240 : 636 - 643
  • [40] Recent advances in Li1+xAlxTi2-x(PO4)3 solid-state electrolyte for safe lithium batteries
    Xiao, Wei
    Wang, Jingyu
    Fan, Linlin
    Zhang, Jiujun
    Li, Xifei
    ENERGY STORAGE MATERIALS, 2019, 19 : 379 - 400
12345