Numerical investigation of turbulence characteristics and upstream disturbance of flow through standard and multi-hole orifice flowmeters

被引:30
|
作者
Moosa, Morteza [1 ]
Hekmat, Mohamad Hamed [1 ]
机构
[1] Tafresh Univ, Dept Mech Engn, Tafresh 3951879611, Iran
关键词
Standard orifice; Multi-hole orifice; Discharge coefficient; Upstream disturbance; Pressure drop; Turbulence characteristics; PERFORATED PLATE; PERFORMANCE;
D O I
10.1016/j.flowmeasinst.2019.01.002
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this research, the flow through the standard and improved multi-hole orifices of Shaaban, Singh and Huang is simulated numerically. The main objective is to study the turbulence characteristics of the downstream flow of the orifices, the discharge coefficient as the efficiency criterion of the orifices and the effect of disturbance of the upstream flow, due to putting an out of plane double elbow, on orifice performance and downstream flow characteristics. The three-dimensional steady, incompressible turbulent flow with a Reynolds number of 9200 is considered. The conservation equations are solved using finite volume method on hybrid meshes. The turbulence model employed in this research is the standard kappa-epsilon model. The simulation results indicate the gradual development of the turbulent kinetic energy and turbulent energy dissipation rate from the orifice plate to fully developed turbulent flow in the downstream of the standard orifice. However, for the multi-hole orifices, these characteristics are reduced at a higher rate with increasing the distance from orifice, and thus, unlike the standard orifice, it is possible to achieve a fully developed turbulent flow in a shorter downstream distance. In addition, all types of the improved orifices have the higher discharge coefficient with respect to the standard ones. Among them, Singh's model has the highest discharge coefficient. The numerical results indicate that for the ineffectiveness of the flow rate measurement from the upstream disturbance of the orifice, the straight pipe length between the source of disturbance and the orifice for the standard type should be at least 60 t greater than the pipe diameter. While this length is about 25 times greater than the diameter of the pipe for the multi-hole orifices. These three important advantages of the shorter length of the developing turbulent region, the higher discharge coefficient and the lower sensitivity to the upstream disturbances for the improved orifices compared to the standard type show an increase in the accuracy and efficiency of these new kinds of orifices while using them as the flowmeters.
引用
收藏
页码:203 / 218
页数:16
相关论文
共 50 条
  • [1] Numerical simulations for multi-hole orifice flow meter
    Singh, V. K.
    Tharakan, T. John
    FLOW MEASUREMENT AND INSTRUMENTATION, 2015, 45 : 375 - 383
  • [2] A numerical and experimental analysis of multi-hole orifice in turbulent flow
    Golijanek-Jedrzejczy, Anna
    Mrowiec, Andrzej
    Kleszcz, Slawosz
    Hanus, Robert
    Zych, Marcin
    Jaszczur, Marek
    MEASUREMENT, 2022, 193
  • [3] Experimental on metering characteristics of multi-hole orifice
    Ma, Tai-Yi
    Wang, Dong
    Zhang, Bing-Dong
    Lin, Zong-Hu
    Hedongli Gongcheng/Nuclear Power Engineering, 2010, 31 (02): : 126 - 130
  • [4] Influence of the Hole Chamfer on the Characteristics of a Multi-hole Orifice Flowmeter
    Hao, Caizhe
    Song, Xiaoming
    Jia, Zhining
    FDMP-FLUID DYNAMICS & MATERIALS PROCESSING, 2019, 15 (04): : 391 - 401
  • [5] Simulation of the flow field of multi-hole orifice flow meter
    Yu, Hongshi
    Zhang, Tao
    Zhao, Shanshan
    Jiang, Wei
    Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology, 2014, 47 (01): : 61 - 66
  • [6] Experimental and Numerical Analysis of Multi-Hole Orifice Flow Meter: Investigation of the Relationship between Pressure Drop and Mass Flow Rate
    Tomaszewski, Adam
    Przybylinski, Tomasz
    Lackowski, Marcin
    SENSORS, 2020, 20 (24) : 1 - 23
  • [7] Visualization and numerical simulation of hydrodynamic cavitation in multi-hole orifice plate
    He Z.
    Chen Y.
    Ji C.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2016, 47 (02): : 396 - 401
  • [8] Influence of the entrainment of vortex on the accuracy of multi-hole orifice flow meter
    Yu H.
    Zhang T.
    Zhang, Tao (zt50@tju.edu.cn), 1600, Tianjin University (49): : 465 - 471
  • [9] Experimental research of single-hole and multi-hole orifice gas flow meters
    Durdevic, Marko
    Bukurov, Masa
    Tasin, Slobodan
    Bikic, Sinisa
    FLOW MEASUREMENT AND INSTRUMENTATION, 2019, 70
  • [10] Experimental investigation of key parameters pertinent to multi-hole orifice throttling characteristic
    赵天怡
    张吉礼
    Journal of Harbin Institute of Technology, 2008, (01) : 9 - 12