Influences of grinding parameters on the surface of Inconel 718

被引：0
|
作者：
Yaakob, Nurul Afizan [1 ]
Harun, Nurul Hatiqah [1 ]
Ganesan, Hema Nanthii [1 ]
Abdullah, Raja Izamshah Raja [1 ]
Ghani, Jaharah A. [2 ]
Haron, Che Hassan Che [2 ]
Kasim, Mohd Shahir [1 ]
机构：
[1] Univ Tekn Malaysia Melaka, Fac Mfg Engn, Dept Mfg Proc, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Mech & Mat Engn, Bangi 43600, Selangor, Malaysia
来源：
PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ADVANCED PROCESSES AND SYSTEMS IN MANUFACTURING (APSIM 2016) | 2016年
关键词：
Surface grinding; Historical data; Surface roughness; Response surface methodology;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
High-strength Inconel 718 are used as materials for critical parts of turbine blade because of good mechanical properties. Unfortunately, there is a drawback during material removing process. In this paper, grinding performance of surface finish was investigated under several cutting conditions. The variable parameter studied were traverse speed, depth of cut and number of passes. Historical data of Response Surface Methodology (RSM) were used to analyze the correlation between variable input and output. ANOVA shows traverse speed and depth of cut were found to be significant factors instead of number of passes where P-value is less than 0.05. Appropriate parameter settings for grinding of the Inconel 718 are suggested.
引用
收藏
页码：95 / 96
页数：2
相关论文
共 50 条
  • [31] Influence of abrasive water jet parameters on the surface integrity of Inconel 718
    Salinas, Lorena Cano
    Moussaoui, Kamel
    Hejjaji, Akshay
    Salem, Mehdi
    Hor, Anis
    Zitoune, Redouane
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 114 (3-4): : 997 - 1009
  • [32] Ultrasonic assisted creep feed grinding of Inconel 718
    Bhaduri, D.
    Soo, S. L.
    Novovic, D.
    Aspinwall, D. K.
    Harden, P.
    Waterhouse, C.
    Bohr, S.
    Mathieson, A. C.
    Lucas, M.
    PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 2013, 6 : 615 - 620
  • [33] Improving the Working Surface Condition of Electroplated Cubic Boron Nitride Grinding Quill in Surface Grinding of Inconel 718 by the Assistance of Ultrasonic Vibration
    Li, Sisi
    Wu, Yongbo
    Fujimoto, Masakazu
    Nomura, Mitsuyoshi
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (07):
  • [34] AN INVESTIGATION INTO THE INFLUENCES OF GRINDING WHEEL HARDNESS AND GRINDING PARAMETERS ON SURFACE ROUGHNESS AND GRINDING FORCES
    Demir, Halil
    Gullu, Abdulkadir
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2008, 23 (03): : 577 - 584
  • [35] Multi-dimensional ultrasonic-assisted belt grinding on the surface integrity of Inconel 718
    Li, Shaochuan
    Xiao, Guijian
    Wang, Yingxin
    Zhao, Zeyong
    Zhuo, Xiaoqin
    Chen, Benqiang
    Huang, Yun
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 102 : 700 - 717
  • [36] Mechanism of gradient strengthening layer formation based on microstructure and microhardness of Inconel 718 grinding surface
    Dong, Zhigang
    Xu, Nianwei
    Zhang, Yuan
    Han, Lu
    Kang, Renke
    Wu, Xiaofeng
    Wang, Yan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (3-4): : 2363 - 2372
  • [37] Mechanism of gradient strengthening layer formation based on microstructure and microhardness of Inconel 718 grinding surface
    Zhigang Dong
    Nianwei Xu
    Yuan Zhang
    Lu Han
    Renke Kang
    Xiaofeng Wu
    Yan Wang
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 2363 - 2372
  • [38] Relationship of the roller burnishing process parameters with the surface and subsurface properties of Inconel 718
    Eduardo Luiz de Godoi
    Samuel José Casarin
    Gilberto de Magalhães Bento Gonçalves
    Luiz Eduardo de Angelo Sanchez
    The International Journal of Advanced Manufacturing Technology, 2023, 129 : 5359 - 5370
  • [39] Optimization of Machining Parameters of Inconel 718 by WEDM Using Response Surface Methodology
    Senkathir, S.
    Aravind, R.
    Samson, R. Manoj
    Raj, A. C. Arun
    ADVANCES IN MANUFACTURING PROCESSES, ICEMMM 2018, 2019, : 383 - 392
  • [40] Effect of High Speed Cutting Parameters on the Surface Characteristics of Superalloy Inconel 718
    Thakur, D. G.
    Ramamoorthy, B.
    Vijayaraghavan, L.
    WORLD CONGRESS ON ENGINEERING, WCE 2010, VOL III, 2010, : 2108 - 2111
12345