Cold and warm V-bending test for carbon-fiber-reinforced plastic sheet

被引：12

作者：

Uriya, Yu ^{[1
]}

Ikeuch, Katsuyoshi ^{[1
]}

Yanagimoto, Jun ^{[2
]}

机构：

[1] Univ Tokyo, Grad Sch Engn, Meguro Ku, Tokyo 1538505, Japan

[2] Univ Tokyo, Inst Ind Sci, Meguro Ku, Tokyo 1538505, Japan

来源：

11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014 | 2014年 / 81卷

关键词：

Bending; Die bending; Plastic; Composite material; Springback; Fiber-reinforced plastic; HIGH-STRENGTH STEEL; TEMPERATURE; SPRINGBACK; HOT;

D O I：

10.1016/j.proeng.2014.10.203

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Although carbon-fiber-reinforced plastics (CFRPs) are the lightest and stiffest material, the use of CFRP is limited because of their higher price and lower formability than the other materials. We propose a method of stamping consolidated CFRP sheets. CFRP sheets are sandwiched by dummy metallic sheets in the stamping process. The dummy metallic sheets act as heating media, as well as protective materials for the CFRP sheets. In this paper, the springback angle of the specimens after the V-bending test under cold and warm condition was investigated and the fractures in formed CFRP sheets were observed. (C) 2014 Published by Elsevier Ltd.

引用

页码：1633 / 1638

页数：6

共 50 条

[11] Development of Laser Processing Carbon-Fiber-Reinforced Plastic
Wang, Zhonghe
Ma, Yao
Yuan, Boshi
Wu, Chunting
Li, Changqing
Sun, Shuwei
SENSORS, 2023, 23 (07)
[12] Bending fatigue of carbon-fiber-reinforced epoxy composite strands
Couillard, RAA
Schwartz, P
COMPOSITES SCIENCE AND TECHNOLOGY, 1997, 57 (02) : 229 - 235
[13] Delamination behaviour of high strength vibration damping sheet in V-bending test
Park, Hyeonil
Lee, Jinwoo
Kim, Se-Jong
Kim, Daeyong
INTERNATIONAL DEEP DRAWING RESEARCH GROUP 37TH ANNUAL CONFERENCE, 2018, 418
[14] Metal Coating of Carbon Fabric and Properties of the Carbon-Fiber-Reinforced Plastic
Bocharov, Artem
Vigovskiy, Valeriy
Nelyub, Vladimir
MATERIALS TODAY-PROCEEDINGS, 2019, 11 : 107 - 111
[15] TOWARDS OPTIMUM CARBON-FIBER-REINFORCED PLASTIC END CLOSURES
BLACHUT, J
GALLETLY, GD
LEVYNETO, F
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1991, 205 (05) : 329 - 342
[16] Moisture transfer in carbon-fiber-reinforced plastic with degraded surface
Kablov, E. N.
Startsev, O. V.
Panin, S. V.
DOKLADY PHYSICAL CHEMISTRY, 2015, 461 : 80 - 83
[17] Integrated Carbon-Fiber-Reinforced Plastic Microstrip Patch Antennas
Preddy, Christopher M.
Singh, Rajinder
Aaen, Peter H.
Silva, S. Ravi P.
IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, 2020, 19 (04): : 606 - 610
[18] Moisture transfer in carbon-fiber-reinforced plastic with degraded surface
E. N. Kablov
O. V. Startsev
S. V. Panin
Doklady Physical Chemistry, 2015, 461 : 80 - 83
[19] Analysis of Longitudinal Cambering in V-bending of Sheet Metal
Jin, Yingjun
Shibata, Takahiro
Omata, Hitoshi
Koyama, Junichi
STEEL RESEARCH INTERNATIONAL, 2010, 81 (09) : 765 - 768
[20] Springback reduction of aluminum sheet in V-bending dies
Choudhury, Imtiaz A.
Ghomi, Vahid
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2014, 228 (08) : 917 - 926

← 1 2 3 4 5 →