Metal Coating of Carbon Fabric and Properties of the Carbon-Fiber-Reinforced Plastic

被引：3
|
作者：
Bocharov, Artem [1 ]
Vigovskiy, Valeriy [1 ]
Nelyub, Vladimir [1 ]
机构：
[1] Bauman Moscow State Tech Univ, 5,2nd Baumanskaya St, Moscow 105005, Russia
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 11卷
关键词：
carbon tape; carbon fiber; metallization; titanium and stainless steel coatings;
D O I：
10.1016/j.matpr.2018.12.115
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The results of experimental and theoretical studies of the mechanical characteristics of filaments from which a carbon tape of the LUP brand are made when applied to it with metallic coatings of titanium and stainless steel and carbon plastics produced using vacuum infusion technology using an epoxy binder are presented. It has been established that the application of metal coatings to the carbon tape will slightly increase the strength of the yarns during stretching and lead to a significant increase in the strength of carbon plastics in the interlayer shear. Sputtering of metal coatings was carried out in two units: Bulat-6 and MIR-2. Metallization of the carbon tape with the use of the vacuum-arc device "Bulat-6" allows obtaining low values of the interlayer layers of the transverse layer than the metallization of the metallic magnetron in MIR-2. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：107 / 111
页数：5
相关论文
共 50 条
  • [1] The Effect of Copper Coating on the Properties of Carbon-Fiber-Reinforced Plastics
    Tarabrina T.D.
    Nelyub V.A.
    Malysheva G.V.
    [J]. Polymer Science - Series D, 2022, 15 (04) : 648 - 651
  • [2] Effect of the Technology of Sewing Carbon Fabric on the Properties of Carbon Fiber Reinforced Plastic
    Buyanov I.A.
    [J]. Buyanov, I.A. (malyin@mail.ru), 2018, Pleiades journals (2018) : 1255 - 1258
  • [3] FATIGUE FAILURE OF LAMINATED CARBON-FIBER-REINFORCED PLASTIC
    ANDERSON, Y
    MIKELSONS, MY
    TAMUZH, VP
    TARASHCH, IV
    [J]. MECHANICS OF COMPOSITE MATERIALS, 1991, 27 (01) : 58 - 62
  • [4] Development of Laser Processing Carbon-Fiber-Reinforced Plastic
    Wang, Zhonghe
    Ma, Yao
    Yuan, Boshi
    Wu, Chunting
    Li, Changqing
    Sun, Shuwei
    [J]. SENSORS, 2023, 23 (07)
  • [5] COMPRESSIVE PROPERTIES OF CARBON-FIBER-REINFORCED PLASTICS
    CARR, DJ
    BARKER, AJ
    [J]. CHEMICAL ENGINEERING RESEARCH & DESIGN, 1993, 71 (A3): : 316 - 318
  • [6] Mechanical Properties of Carbon-Fiber-Reinforced Concrete
    Ghanem, Sahar Y.
    Bowling, Jonathan
    [J]. ADVANCES IN CIVIL ENGINEERING MATERIALS, 2019, 8 (03): : 224 - 234
  • [7] Tensile Properties of Unsaturated Polyester and Epoxy Resin Reinforced with Recycled Carbon-Fiber-Reinforced Plastic
    Okayasu, Mitsuhiro
    Kondo, Yuta
    [J]. APPLIED COMPOSITE MATERIALS, 2018, 25 (03) : 561 - 568
  • [8] TOWARDS OPTIMUM CARBON-FIBER-REINFORCED PLASTIC END CLOSURES
    BLACHUT, J
    GALLETLY, GD
    LEVYNETO, F
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1991, 205 (05) : 329 - 342
  • [9] Tensile Properties of Unsaturated Polyester and Epoxy Resin Reinforced with Recycled Carbon-Fiber-Reinforced Plastic
    Mitsuhiro Okayasu
    Yuta Kondo
    [J]. Applied Composite Materials, 2018, 25 : 561 - 568
  • [10] Moisture transfer in carbon-fiber-reinforced plastic with degraded surface
    Kablov, E. N.
    Startsev, O. V.
    Panin, S. V.
    [J]. DOKLADY PHYSICAL CHEMISTRY, 2015, 461 : 80 - 83
12345