Influence of sinter-cooling rate on the mechanical properties of powder metallurgy austenitic, ferritic, and duplex stainless steels sintered in vacuum

被引：36
|
作者：
Martin, F. [1 ]
Garcia, C. [1 ]
Blanco, Y. [1 ]
Rodriguez-Mendez, M. L. [2 ]
机构：
[1] Univ Valladolid, Mat Engn, EII, E-47011 Valladolid, Spain
[2] Univ Valladolid, Dept Inorgan Chem, EII, E-47011 Valladolid, Spain
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2015年 / 642卷
关键词：
Mechanical characterization; Hardness measurement; Steel; Powder metallurgy; Hardening; NITROGEN-HYDROGEN ATMOSPHERE; CORROSION BEHAVIOR; TEMPERATURE; RESISTANCE; DENSITY;
D O I：
10.1016/j.msea.2015.06.097
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Austenitic, ferritic and duplex stainless steels obtained through powder metallurgy technology were sintered in vacuum. Powders were compacted at 650 or 750 MPa and sintered in vacuum with two sinter-cooling rates (furnace- and water-cooling). Mechanical properties, using tensile testing and hardness measurements were evaluated. A full microstructural study of the three types of stainless steels was performed. The mechanical behavior was a function of the sinter-cooling rate and the chemical composition. Duplex stainless steel showed the best mechanical behavior. The use of high compaction pressure and water-cooling process promoted the best mechanical results for all compositions. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：360 / 365
页数：6
相关论文
共 50 条
  • [41] Characterization of phase properties and deformation in ferritic-austenitic duplex stainless steels by nanoindentation and finite element method
    Schwarm, Samuel C.
    Kolli, R. Prakash
    Aydogan, Eda
    Mburu, Sarah
    Ankem, Sreeramamurthy
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 680 : 359 - 367
  • [42] Microstructure and mechanical properties of dissimilar friction stir welds in austenitic-duplex stainless steels
    Wang, Wenyang
    Hu, Ye
    Zhang, Meng
    Zhao, Hongwei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 787
  • [43] Studies on Mechanical Properties of Hot-Forged Duplex Stainless Steels Sintered in Hydrogen Atmosphere
    Chinnaraj R.
    Ramajayam M.
    Journal of The Institution of Engineers (India): Series D, 2019, 100 (02) : 283 - 290
  • [44] MECHANICAL-PROPERTIES AND SIGMA-PHASE PRECIPITATION OF SINTERED DUPLEX STAINLESS-STEELS
    WANG, WF
    SU, YL
    HO, DCC
    POWDER METALLURGY INTERNATIONAL, 1987, 19 (04): : 15 - 17
  • [45] The influence of preceding cryoforming and testing temperature on the mechanical properties of austenitic stainless steels
    Bleck, W
    Frehn, A
    Kranz, S
    Franke, A
    Weiss, A
    STEEL RESEARCH, 2000, 71 (08): : 303 - 309
  • [46] INFLUENCE OF TEMPERATURE, TRANSFORMATION, AND STRAIN RATE ON DUCTILITY PROPERTIES OF AUSTENITIC STAINLESS STEELS
    NEFF, DV
    MITCHELL, TE
    TROIANO, AR
    ASM TRANSACTIONS QUARTERLY, 1969, 62 (04): : 858 - &
  • [47] THE INFLUENCE OF ALUMINUM CONTENT ON THE POROSITY, MICROSTRUCTURE, AND MECHANICAL PROPERTIES OF POWDER METALLURGY STEELS
    Sazegaran, Hamid
    Bahari, Hasan
    Naserian-Nik, Ali Mohammad
    Khorramshahi, Farhad
    ARCHIVES OF METALLURGY AND MATERIALS, 2022, 67 (01) : 105 - 111
  • [48] LOCALIZED CORROSION PROPERTIES OF LOW INTERSTITIAL FERRITIC, HIGH PURITY AUSTENITIC AND HIGH CHROMIUM DUPLEX STAINLESS STEELS.
    Sinigaglia, D.
    Rondelli, G.
    Taccani, G.
    Vicentini, B.
    Dallaspezia, G.
    Galelli, L.
    Bazzoni, B.
    Werkstoffe und Korrosion, 1980, 31 (11): : 851 - 860
  • [49] Influence of cryogenic cooling rate on mechanical properties of tool steels
    Mazor, G.
    Ladizhensky, I.
    Shapiro, A.
    2017 INTERNATIONAL CONFERENCE ON MATERIALS AND INTELLIGENT MANUFACTURING (ICMIM 2017), 2017, 244
  • [50] Effects of long-term thermal aging on bulk and local mechanical behavior of ferritic-austenitic duplex stainless steels
    Schwarm, Samuel C.
    Mburu, Sarah
    Kolli, R. Prakash
    Perea, Daniel E.
    Ankem, Sreeramamurthy
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 720 : 130 - 139
12345