Influence of sinter-cooling rate on the mechanical properties of powder metallurgy austenitic, ferritic, and duplex stainless steels sintered in vacuum

被引：36
|
作者：
Martin, F. [1 ]
Garcia, C. [1 ]
Blanco, Y. [1 ]
Rodriguez-Mendez, M. L. [2 ]
机构：
[1] Univ Valladolid, Mat Engn, EII, E-47011 Valladolid, Spain
[2] Univ Valladolid, Dept Inorgan Chem, EII, E-47011 Valladolid, Spain
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2015年 / 642卷
关键词：
Mechanical characterization; Hardness measurement; Steel; Powder metallurgy; Hardening; NITROGEN-HYDROGEN ATMOSPHERE; CORROSION BEHAVIOR; TEMPERATURE; RESISTANCE; DENSITY;
D O I：
10.1016/j.msea.2015.06.097
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Austenitic, ferritic and duplex stainless steels obtained through powder metallurgy technology were sintered in vacuum. Powders were compacted at 650 or 750 MPa and sintered in vacuum with two sinter-cooling rates (furnace- and water-cooling). Mechanical properties, using tensile testing and hardness measurements were evaluated. A full microstructural study of the three types of stainless steels was performed. The mechanical behavior was a function of the sinter-cooling rate and the chemical composition. Duplex stainless steel showed the best mechanical behavior. The use of high compaction pressure and water-cooling process promoted the best mechanical results for all compositions. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：360 / 365
页数：6
相关论文
共 50 条
  • [31] INFLUENCE OF GEOMETRY AND COOLING RATE ON PROPERTIES OF SINTER-HARDENED STEELS
    Forno, Ilaria
    Grande, Marco Actis
    ACTA METALLURGICA SLOVACA, 2013, 19 (04): : 271 - 281
  • [32] Insight into Structural Changes and Electrochemical Properties of Spark Plasma Sintered Nanostructured Ferritic and Austenitic Stainless Steels
    Ahmed, Junaid
    Toor, Ihsan-ul-Haq
    Hussein, Mohamed A.
    Al-Aqeeli, Nasser
    Baig, Mirza M. A.
    NANOMATERIALS, 2022, 12 (07)
  • [33] IMPROVEMENTS IN CORROSION-RESISTANCE, MECHANICAL-PROPERTIES, AND WELDABILITY OF DUPLEX AUSTENITIC FERRITIC STEELS
    CLARK, CA
    GUHA, P
    WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, 1983, 34 (01): : 27 - 31
  • [34] Effect of chemical composition and sintering conditions on the mechanical properties of sintered duplex stainless steels
    Martin, F.
    Garcia, C.
    Blanco, Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (29-30): : 8500 - 8511
  • [35] Analysis of the interface and mechanical properties of field-assisted sintered duplex stainless steels
    Garcia-Junceda, Andrea
    Diaz-Rivera, Coral
    Gomez-Torralba, Victor
    Rincon, Maria
    Campos, Monica
    Manuel Torralba, Jose
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 740 : 410 - 419
  • [36] Influence of hydrogen on mechanical properties of nitrogen supersaturated austenitic stainless steels
    Shehata, MF
    Schwarz, S
    Engelmann, HJ
    Uhlemann, M
    MATERIALS SCIENCE AND TECHNOLOGY, 1997, 13 (12) : 1016 - 1022
  • [37] Tailoring the microstructure and the mechanical properties of ultrafine grained high strength ferritic steels by powder metallurgy
    Mouawad, B.
    Boulnat, X.
    Fabregue, D.
    Perez, M.
    de Carlan, Y.
    JOURNAL OF NUCLEAR MATERIALS, 2015, 465 : 54 - 62
  • [38] Influence of σ-phase on mechanical properties and corrosion resistance of duplex stainless steels
    Lopez, N
    Cid, M
    Puiggali, M
    CORROSION SCIENCE, 1999, 41 (08) : 1615 - 1631
  • [39] Influence of Texture on the Mechanical Properties of Hot Rolled Duplex Stainless Steels
    Subramanian, K. Manikanda
    Chandramohan, P.
    Ravisankar, B.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2011, 64 (06) : 519 - 534
  • [40] Influence of Texture on the Mechanical Properties of Hot Rolled Duplex Stainless Steels
    K. Manikanda Subramanian
    P. Chandramohan
    B. Ravisankar
    Transactions of the Indian Institute of Metals, 2011, 64 : 519 - 534
12345