A critical review of stress intensity factor solutions for surface cracks in round bars subjected to tension loading

被引：61
|
作者：
Toribio, J. [1 ]
Alvarez, N. [1 ]
Gonzalez, B. [1 ]
Matos, J. C. [2 ]
机构：
[1] Univ Salamanca, Dept Mat Engn, EPS, Zamora 49022, Spain
[2] Univ Salamanca, Dept Comp Engn, EPS, Zamora 49022, Spain
来源：
ENGINEERING FAILURE ANALYSIS | 2009年 / 16卷 / 03期
关键词：
Stress intensity factors; Round bars; Crack aspect ratio; Fatigue crack propagation; Damage tolerance assessment; ENERGY RELEASE RATE; CORROSION CRACKING; GROWTH SIMULATION; FAILURE ANALYSIS; EUTECTOID STEEL; EDGE-CRACK; FRACTURE; SHAFT; BOLT; ELEMENT;
D O I：
10.1016/j.engfailanal.2008.06.023
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this paper different stress intensity factor (SIF) solutions numerically obtained by previous researchers on transversely cracked cylinders subjected to tension loading are analyzed. Solutions are compared in the matter of stress intensity values at the centre of the crack front and at the external surface of the cylinder, and a wide range of crack aspect ratios and relative crack depths are studied, in order to provide the engineer with solutions applicable to different real situations in fracture mechanics or damage tolerance analyses such as static or cyclic (fatigue) loading, environmentally assisted cracking or corrosion-fatigue. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：794 / 809
页数：16
相关论文
共 50 条
  • [41] STRESS INTENSITY FACTOR SOLUTIONS FOR A CRACKED BOLT UNDER TENSION, BENDING AND RESIDUAL-STRESS LOADING
    TORIBIO, J
    SANCHEZGALVEZ, V
    ASTIZ, MA
    CAMPOS, JM
    ENGINEERING FRACTURE MECHANICS, 1991, 39 (02) : 359 - 371
  • [42] Mode III Stress Intensity Factors of Surface Crack in Round Bars
    Ismail, A. E.
    Ariffin, A. K.
    Abdullah, S.
    Ghazali, M. J.
    Daud, R.
    ADVANCES IN KEY ENGINEERING MATERIALS, 2011, 214 : 192 - +
  • [43] Stress intensity factor estimation of cracks originating from square, circular or elliptical hole in a plate subjected to tension
    Vasamsetty, Ritiesh
    Arunkumar, S.
    MATERIALS TODAY-PROCEEDINGS, 2022, 66 : 1955 - 1960
  • [44] ANALYSIS OF STRESS INTENSITY FACTORS FOR SURFACE CRACKS SUBJECTED TO ARBITRARILY DISTRIBUTED SURFACE STRESSES (3RD REPORT, ANALYSIS AND APPLICATION OF INFLUENCE COEFFICIENTS FOR ROUND BARS WITH A SEMIELLIPTICAL SURFACE CRACK).
    Shiratori, Masaki
    Miyoshi, Toshiro
    Sakai, Yoshiaki
    Zhang, Guang rong
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1987, 53 (488): : 779 - 785
  • [45] Effect of loading rate on the bond behaviour of plain round bars in concrete subjected to uniaxial lateral tension
    Li, Xinru
    Wu, Zhimin
    Zheng, Jianjun
    Yu, Rena C.
    Zhou, Xiangming
    MAGAZINE OF CONCRETE RESEARCH, 2021, 73 (20) : 1033 - 1047
  • [46] Stress intensity factor solutions for surface cracks with large aspect ratios in cylinders and plates
    Zhang, Tairui
    Lu, Kai
    Katsuyama, Jinya
    Li, Yinsheng
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2021, 189
  • [47] CLOSED-FORM STRESS INTENSITY FACTOR SOLUTIONS FOR DEEP SURFACE CRACKS IN PLATES
    Azuma, Kisaburo
    Li, Yinsheng
    Hasegawa, Kunio
    Xu, Steven
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2017, VOL 1B, 2017,
  • [48] STRESS INTENSITY FACTORS FOR CRACKS IN NOTCHED FINITE PLATES SUBJECTED TO BIAXIAL LOADING
    XIAO, ST
    BROWN, MW
    MILLER, KJ
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1985, 8 (04) : 349 - 372
  • [49] SUMMARY AND CRITICAL EVALUATION OF STRESS INTENSITY FACTOR SOLUTIONS OF CORNER CRACKS AT THE EDGE OF A HOLE.
    Cloud, R.L.
    Palusamy, S.S.
    Welding Research Council Bulletin, 1982,
  • [50] Stress Intensity Factors for Embedded, Surface, and Corner Cracks in Finite-Thickness Plates Subjected to Tensile Loading
    Toribio, Jesus
    Gonzalez, Beatriz
    Matos, Juan-Carlos
    Mulas, Oscar
    MATERIALS, 2021, 14 (11)
12345