A critical review of stress intensity factor solutions for surface cracks in round bars subjected to tension loading

被引：61
|
作者：
Toribio, J. [1 ]
Alvarez, N. [1 ]
Gonzalez, B. [1 ]
Matos, J. C. [2 ]
机构：
[1] Univ Salamanca, Dept Mat Engn, EPS, Zamora 49022, Spain
[2] Univ Salamanca, Dept Comp Engn, EPS, Zamora 49022, Spain
来源：
ENGINEERING FAILURE ANALYSIS | 2009年 / 16卷 / 03期
关键词：
Stress intensity factors; Round bars; Crack aspect ratio; Fatigue crack propagation; Damage tolerance assessment; ENERGY RELEASE RATE; CORROSION CRACKING; GROWTH SIMULATION; FAILURE ANALYSIS; EUTECTOID STEEL; EDGE-CRACK; FRACTURE; SHAFT; BOLT; ELEMENT;
D O I：
10.1016/j.engfailanal.2008.06.023
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this paper different stress intensity factor (SIF) solutions numerically obtained by previous researchers on transversely cracked cylinders subjected to tension loading are analyzed. Solutions are compared in the matter of stress intensity values at the centre of the crack front and at the external surface of the cylinder, and a wide range of crack aspect ratios and relative crack depths are studied, in order to provide the engineer with solutions applicable to different real situations in fracture mechanics or damage tolerance analyses such as static or cyclic (fatigue) loading, environmentally assisted cracking or corrosion-fatigue. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：794 / 809
页数：16
相关论文
共 50 条
  • [31] PART-CIRCULAR SURFACE CRACKS IN ROUND BARS UNDER TENSION, BENDING AND TWISTING
    LEVAN, A
    ROYER, J
    INTERNATIONAL JOURNAL OF FRACTURE, 1993, 61 (01) : 71 - 99
  • [32] J-Integral Analysis of Surface Cracks in Round Bars under Tension Loadings
    Ismail, A. E.
    Ariffin, A. K.
    Abdullah, S.
    Ghazali, M. J.
    Daud, R.
    AbdulRazzaq, M.
    Zulkifli, A.
    ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 37 - +
  • [33] Development of stress intensity factor solutions for surface and embedded cracks in API 579
    Anderson, Ted L.
    Thorwald, Gregory
    Revelle, Daniel J.
    Osage, David A.
    Janelle, Jeremy L.
    Fuhry, Matthew E.
    Welding Research Council Bulletin, 2002, (471): : 1 - 79
  • [34] Stress intensity factor equations for mixed-mode surface and corner cracks in finite-thickness plates subjected to tension loads
    Ayhan, Ali O.
    Yucel, Ugur
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2011, 88 (5-7) : 181 - 188
  • [35] Three-dimensional mixed-mode stress intensity factor solutions for inclined surface cracks in plate structures subjected to uniaxial and biaxial uniform tensile loading
    Ahin, Hakan S.
    Ayhan, Ali O.
    Yaren, M. Faruk
    MARINE STRUCTURES, 2024, 96
  • [36] Stress intensity factor solutions for cracks in threaded fasteners
    Oster, DM
    Mills, WJ
    STRUCTURAL INTEGRITY OF FASTENERS, VOL 2, 2000, 1391 : 85 - 101
  • [37] Stress intensity factor solutions for cracks in railway axles
    Madia, M.
    Beretta, S.
    Schoedel, M.
    Zerbst, U.
    Luke, M.
    Varfolomeev, I.
    ENGINEERING FRACTURE MECHANICS, 2011, 78 (05) : 764 - 792
  • [38] Stress intensity factors for a pipe with two symmetric cracks subjected to tension and torsion
    Ivanyts'kyi, YL
    Andreikiv, AO
    Korol', VR
    MATERIALS SCIENCE, 2000, 36 (06) : 932 - 934
  • [39] Stress intensity factors and fatigue growth of surface cracks in notched shells and round bars: two decades of research work
    Carpinteri, Andrea
    Ronchei, Camilla
    Vantadori, Sabrina
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2013, 36 (11) : 1164 - 1177
  • [40] Stress Intensity Factors for a Pipe with Two Symmetric Cracks Subjected to Tension and Torsion
    Ya. L. Ivanyts'kyi
    A. O. Andreikiv
    V. R. Korol'
    Materials Science, 2000, 36 : 932 - 934
12345