High Power LED Thermal and Stress Simulation on Copper Slug

被引：3

作者：

Vairavan, Rajendaran ^{[1
]}

Sauli, Zaliman ^{[1
]}

Retnasamy, Vithyacharan ^{[1
]}

Ismail, Rizalafande Che ^{[1
]}

Nor, Nurul Izza Mohd ^{[1
]}

Nadzri, Nor Shakirina ^{[1
]}

Kamarudin, Hussin ^{[1
]}

机构：

[1] Univ Malaysia Perlis, Sch Microelect Engn, Arau 02600, Perlis, Malaysia

来源：

UKSIM-AMSS 15TH INTERNATIONAL CONFERENCE ON COMPUTER MODELLING AND SIMULATION (UKSIM 2013) | 2013年

关键词：

single GaN chip LED; copper heat slug; junction temperature; ansys; MANAGEMENT; SYSTEM;

D O I：

10.1109/UKSim.2013.150

中图分类号：

TP301 [理论、方法];

学科分类号：

081202 ;

摘要：

High power LED are captivating attention due to its cogent impacts on lighting industry in terms of efficacy, low power consumption, long lifetime and miniature physical size. Nonetheless, the efficiency and reliability of the LED is signified by the junction temperature. This work demonstrates the thermal and stress simulation of single chip LED package with 1mm x1mm x 1mm copper heat slug. The simulation was performed using Ansys version 11. The GaN LED chip was powered with input power of 0.1 W and 1 W. The simulation outcome exhibited that at the maximum junction temperature and stress of the LED chip were 115.81 degrees C and 221.56MPa correspondingly for input power of 1W.

引用

页码：294 / 298

页数：5

共 50 条

[1] Thermal Modeling and Simulation of High Power LED Module
Baran, Krzysztof
Lesko, Marcin
Wachta, Henryk
Rozowicz, Antoni
COMPUTATIONAL TECHNOLOGIES IN ENGINEERING (TKI'2018), 2019, 2078
[2] The Thermal Simulation of High Power Density LED Light Source
Zheng Huaiwen
Yang Hua
Yi Xiaoyan
Wang Junxi
Li Jinmin
2017 14TH CHINA INTERNATIONAL FORUM ON SOLID STATE LIGHTING (SSLCHINA) : INTERNATIONAL FORUM ON WIDE BANDGAP SEMICONDUCTORS (IFWS), 2017, : 175 - 178
[3] Transient Thermal Simulation of High Power LED and its Challenges
Tandon, Sanchit
Liu, E.
Zahner, Thomas
Besold, Sebastian
Kalb, Wolfgang
Elger, Gordon
2017 18TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2017,
[4] Thermal simulation and optimization of high-power white LED lamps
Bai, Kun
Wu, Li-gang
Nie, Qiu-hua
Dai, Shi-xun
Zhou, Bo-you
Ma, Xiang-jun
Zheng, Zhao-yong
Zhang, Fa-wei
2011 INTERNATIONAL CONFERENCE ON ELECTRONICS, COMMUNICATIONS AND CONTROL (ICECC), 2011, : 573 - 576
[5] Thermal Simulation for High Power LED Systems with Remote Phosphor Layer
Zhang, Minshu
Xie, An
Lo, Jeffery C. C.
Lee, S. W. Ricky
Ahmatjan, Madina
Hong, Feichi
Yin, Haotian
2018 20TH INTERNATIONAL CONFERENCE ON ELECTRONIC MATERIALS AND PACKAGING (EMAP), 2018,
[6] Stress and Temperature Simulation Using Copper-Diamond Composite Slug
Sauli, Zaliman
Retnasamy, Vithyacharan
Vairavan, Rajendaran
Ismail, Rizalafande Che
Khalid, Nazuhusna
Husin, Mohd Fikri Che
Kamarudin, Hussin
UKSIM-AMSS 15TH INTERNATIONAL CONFERENCE ON COMPUTER MODELLING AND SIMULATION (UKSIM 2013), 2013, : 299 - 303
[7] Formation of large scale via slug for high power LED package
Park, Jung Kyu
Hong, Ki Pyo
Park, Sung Yeol
Chang, Byeung Gyu
Jeong, Seung Gyo
Shin, Hyun Dong
JOURNAL OF CERAMIC PROCESSING RESEARCH, 2008, 9 (03): : 262 - 266
[8] Thermal simulation and optimization design on a high-power LED spot lamp
余桂英
朱旭平
胡书红
郝雯雯
郭天太
OptoelectronicsLetters, 2011, 7 (02) : 117 - 121
[9] Thermal Simulation and Validation of 5W High Power LED Luminaire
Barbosa, Jose Luiz F.
Calixto, Wesley P.
Lima, Rodrigo A.
Alves, Aylton J.
Domingues, Elder G.
2015 IEEE 15TH INTERNATIONAL CONFERENCE ON ENVIRONMENT AND ELECTRICAL ENGINEERING (IEEE EEEIC 2015), 2015, : 2216 - 2220
[10] Thermal simulation and optimization design on a high-power LED spot lamp
Yu G.
Zhu X.
Hu S.
Hao W.
Guo T.
Optoelectronics Letters, 2011, 7 (02) : 117 - 121

← 1 2 3 4 5 →