user

Measurements of time-resolved transmittances through cylindrical solid phantoms. Comparison with 2D and 3D FEM simulations

被引：4
|
作者：
Proskurin, SG
Takahashi, S
Kwee, I
Tanikawa, Y
Yamada, Y
机构：
来源：
OPTICAL TOMOGRAPHY AND SPECTROSCOPY OF TISSUE: THEORY, INSTRUMENTATION, MODEL, AND HUMAN STUDIES II, PROCEEDINGS OF | 1997年 / 2979卷
关键词：
optical tomography; inhomogeneity detection; time-resolved transmittance; highly scattering media; optical properties; tissue-like phantom;
D O I：
10.1117/12.280253
中图分类号：
R318 [生物医学工程];
学科分类号：
0831 ;
摘要：
Experimentally acquired time-resolved sind continuous-wave diffuse transmittances of near-infrared light through cylindrical solid phantoms are presented. Homogeneous and inhomogeneous tissue-like phantoms (68 mm diameter, epoxy resin) were used. The transmittances were acquired at 18 degrees intervals around the phantoms. Experimental results are compared with results of two dimensional and three dimensional finite-element simulations. The influence of absorbing boundaries on the shape of time-resolved and continuous-wave transmittances has been investigated for slab and cylindrical geometry. Analytical solutions of the photon diffusion equation with reflecting and absorbing boundary conditions were applied to estimate the optical properties of the material. A new index, time-resolved homogeneity index, is introduced for quick and simple inhomogeneity detection prior to image reconstruction.
引用
收藏
页码：261 / 271
页数：11
相关论文
共 50 条
  • [21] Slope Stability Comparatively Analyzed with 2D and 3D FEM
    Liu Jie-qun
    Liu Jin-long
    ADVANCES IN MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 220-223 : 2908 - +
  • [22] On the validation of DEM and FEM/DEM models in 2D and 3D
    Xiang, Jiansheng
    Munjiza, Antonio
    Latham, John-Paul
    Guises, Romain
    ENGINEERING COMPUTATIONS, 2009, 26 (06) : 673 - 687
  • [23] On the turning modeling and simulation: 2D and 3D FEM approaches
    Asad, M.
    Mabrouki, T.
    Ijaz, H.
    Khan, M. Aurangzeb
    Saleem, W.
    MECHANICS & INDUSTRY, 2014, 15 (05) : 427 - 434
  • [24] Simulations of 3D silicon radiation detector structures in 2D and 3D
    Kalliopuska, Juha
    Eranen, Simo
    Orava, Risto
    2005 IEEE NUCLEAR SCIENCE SYMPOSIUM CONFERENCE RECORD, VOLS 1-5, 2005, : 803 - 807
  • [25] Detectors for 2D or 3D dosimetry measurements
    Ibbott, GS
    GENERAL PRACTICE OF RADIATION ONCOLOGY PHYSICS IN THE 21ST CENTURY, 2000, (26): : 329 - 356
  • [26] 3D Time-Resolved MR Angiography (MRA) of the Carotid Arteries with Time-Resolved Imaging with Stochastic Trajectories: Comparison with 3D Contrast-Enhanced Bolus-Chase MRA and 3D Time-Of-Flight MRA
    Lim, R. P.
    Shapiro, M.
    Wang, E. Y.
    Law, M.
    Babb, J. S.
    Rueff, L. E.
    Jacob, J. S.
    Kim, S.
    Carson, R. H.
    Mulholland, T. P.
    Laub, G.
    Hecht, E. M.
    AMERICAN JOURNAL OF NEURORADIOLOGY, 2008, 29 (10) : 1847 - 1854
  • [27] SHEET METAL FORMING BY NUMERICAL SIMULATIONS: 2D AND 3D AXISYMMETRIC DEFORMATION OF A CYLINDRICAL PIECE
    Mouta, Kevin A.
    Azevedo, Lucas D.
    Fernandes, Maria G.
    Fonseca, Elza M. M.
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017), 2017, : 157 - 166
  • [28] Reproducing 2D Breast Mammography Images with 3D Printed Phantoms
    Clark, Matthew
    Ghammraoui, Bahaa
    Badal, Andreu
    MEDICAL IMAGING 2016: PHYSICS OF MEDICAL IMAGING, 2016, 9783
  • [29] Preform and forging process designs based on geometrical features using 2D and 3D FEM simulations
    Sheu, Jinn-Jong
    Yu, Cheng-Hsien
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 44 (3-4): : 244 - 254
  • [30] Preform and forging process designs based on geometrical features using 2D and 3D FEM simulations
    Jinn-Jong Sheu
    Cheng-Hsien Yu
    The International Journal of Advanced Manufacturing Technology, 2009, 44 : 244 - 254
12345