Preparation of amorphous CNx thin films by pulsed laser deposition using a radio frequency radical beam source

被引:74
|
作者
Aoi, Y [1 ]
Ono, K
Kamijo, E
机构
[1] Ryukoku Univ, Fac Sci & Technol, Dept Chem Mat, Otsu, Shiga 5202194, Japan
[2] Ryukoku Univ, Fac Sci & Technol, High Tech Res Ctr, Otsu, Shiga 5202194, Japan
关键词
D O I
10.1063/1.371048
中图分类号
O59 [应用物理学];
学科分类号
摘要
Amorphous CNx thin films were deposited by pulsed laser deposition (PLD) combined with a nitrogen rf radical beam source which supplies active nitrogen species to the growing film surface. The dominant active nitrogen species are excited N-2 molecules and nitrogen atoms. The deposited films were characterized by scanning electron microscope, x-ray photoelectron spectroscopy (XPS), Raman scattering, and Fourier transform infrared (FTIR) spectroscopy. Nitrogen content of the deposited films increased with increasing rf input power and N-2 pressure in the PLD chamber. The N/C ratio 0.23 was obtained at 400 W of rf input power and 1.3 Pa. XPS N 1s spectra shows the existence of N-sp(2)C and N-sp(3)C bonds in the deposited films. The fraction of the N-sp(3)C increased with increasing of N-2 pressure in the PLD chamber during the operation of radical beam source. FTIR and Raman spectra of the deposited films indicated that N equivalent to C bonds in the films were few as compared to the other carbon and nitrogen bonds. (C) 1999 American Institute of Physics. [S0021-8979(99)02216-1].
引用
收藏
页码:2318 / 2322
页数:5
相关论文
共 50 条
  • [31] Preparation of Cr(Nx,Oy) thin films by pulsed laser deposition
    Suzuki, T
    Saito, H
    Hirai, M
    Suematsu, H
    Jiang, WH
    Yatsui, K
    [J]. THIN SOLID FILMS, 2002, 407 (1-2) : 118 - 121
  • [32] Preparation and Characterization of Mordenite Thin Films via Pulsed Laser Deposition
    Thomas J. Pisklak
    Kenneth J. Balkus
    [J]. Journal of Porous Materials, 2004, 11 : 191 - 209
  • [33] Preparation of ZnO thin films on various substrates by pulsed laser deposition
    Ohshima, T
    Thareja, RK
    Ikegami, T
    Ebihara, K
    [J]. SURFACE & COATINGS TECHNOLOGY, 2003, 169 : 517 - 520
  • [34] Preparation and characterization of mordenite thin films via pulsed laser deposition
    Pisklak, TJ
    Balkus, KJ
    [J]. JOURNAL OF POROUS MATERIALS, 2004, 11 (04) : 191 - 209
  • [35] CNx thin films prepared by laser chemical vapor deposition
    Falk, F
    Meinschien, J
    Mollekopf, G
    Schuster, K
    Stafast, H
    [J]. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 1997, 46 (1-3): : 89 - 91
  • [36] Preparation of IrO2 thin films by pulsed laser deposition
    Xia Mingxiang
    Wang Chuanbin
    Gong Yansheng
    Shen Qiang
    Zhang Liamneng
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2006, 35 (05) : 820 - 823
  • [37] Effect of deposition temperature on chemical composition and electronic properties of amorphous carbon nitride (a-CNx) thin films grown by plasma assisted pulsed laser deposition
    Cappelli, E.
    Trucchi, D. M.
    Kaciulis, S.
    Orlando, S.
    Zanza, A.
    Mezzi, A.
    [J]. THIN SOLID FILMS, 2011, 519 (12) : 4059 - 4063
  • [38] Preparation and characterization of tin oxide thin films by pulsed laser deposition
    Ponce, L
    Jimenez, E
    Leon, R
    Garcia, T
    Pena, JL
    BartoloPerez, P
    Machorro, R
    Siqueiros, J
    CotaAraiza, L
    Farias, MH
    [J]. SURFACES, VACUUM, AND THEIR APPLICATIONS, 1996, (378): : 165 - 168
  • [39] Preparation of IrO2 thin films by pulsed laser deposition
    Xia, Mingxiang
    Wang, Chuanbin
    Gong, Yansheng
    Shen, Qiang
    Zhang, Lianmeng
    [J]. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2006, 35 (05): : 820 - 823
  • [40] YBa2Cu3O7-δ thin films deposited by pulsed laser deposition and radio-frequency assisted pulsed laser deposition
    Stanciu, G.
    Scarisoreanu, N. D.
    Ion, V.
    Moldovan, A.
    Andronescu, E.
    Dinescu, M.
    [J]. JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 2012, 14 (9-10): : 852 - 857