Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys

被引：22
|
作者：
Poddar, Palash [1 ]
Das, Arpan [2 ]
Sahoo, K. L. [1 ]
机构：
[1] CSIR, Met Extract & Forming Div, Natl Met Lab, Jamshedpur 831007, Bihar, India
[2] CSIR, Mat Sci & Technol Div, Natl Met Lab, Jamshedpur 831007, Bihar, India
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2014年 / 45A卷 / 04期
关键词：
TENSILE PROPERTIES; MATRIX COMPOSITES; CREEP-BEHAVIOR; MG ALLOYS; SN ALLOYS; MICROSTRUCTURE; PERFORMANCE; SUBSURFACE; MECHANISM;
D O I：
10.1007/s11661-013-2146-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper deals with the wear behavior of conventional cast Mg-Sn-based alloys. The alloys were studied through pin-on-disk wear test under four different loading conditions; namely, 9.8, 19.6, 29.4, and 39.2 N. The study highlights the cumulative wear loss, volumetric wear loss, dry sliding wear rate, and coefficient of friction of the alloys. The volumetric wear increased with increasing applied load. The wear mechanism was studied with scanning electron microscope. The wear occurs mainly by plowing mechanism and also by delamination. During wear, extensive plastic deformation and work hardening occurred. Microstructural analysis has been carried out for all the alloys at different loading conditions. (C) The Minerals, Metals & Materials Society and ASM International 2013
引用
收藏
页码：2270 / 2283
页数：14
相关论文
共 50 条
  • [31] Die-cast magnesium digital camera
    Ashley, S
    [J]. MECHANICAL ENGINEERING, 1997, 119 (01) : 28 - 28
  • [32] Microstructural evolution of die-cast and homogenized AZ91 Mg-alloys during dry sliding condition
    Chelliah, Nagaraj M.
    Kumar, Ram
    Singh, Harpreet
    Surappa, M. K.
    [J]. JOURNAL OF MAGNESIUM AND ALLOYS, 2017, 5 (01) : 35 - 40
  • [33] Primary Creep of Die-Cast Magnesium-Rare Earth Based Alloys
    Zhu, S. M.
    Gibson, M. A.
    Nie, J. F.
    Easton, M. A.
    Dunlop, G. L.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (09): : 2036 - 2041
  • [34] Effect of cold rolling on hydrogen sorption properties of die-cast and as-cast magnesium alloys
    Amira, S.
    Huot, J.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 520 : 287 - 294
  • [35] Creep and bolt-load retention behavior of die-cast magnesium alloys
    Sohn, KY
    Yurko, JA
    Chen, FC
    Jones, JW
    Allison, JE
    [J]. AUTOMOTIVE ALLOYS II, 1998, : 81 - 90
  • [36] The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys
    Dargusch, MS
    Bowles, AL
    Pettersen, K
    Bakke, P
    Dunlop, GL
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (06): : 1905 - 1909
  • [37] The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys
    M. S. Dargusch
    G. L. Dunlop
    A. L. Bowles
    K. Pettersen
    P. Bakke
    [J]. Metallurgical and Materials Transactions A, 2004, 35 : 1905 - 1909
  • [38] Fatigue strength of die-cast magnesium components
    Renner, F
    Zenner, H
    [J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2002, 25 (12) : 1157 - 1168
  • [39] PRODUCTION OF DIE-CAST METAL MAGNESIUM PARTS
    MEZGER, H
    [J]. WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1978, 68 (07): : 377 - 380
  • [40] Fatigue crack growth mechanisms in high-pressure die-cast magnesium alloys
    El Kadiri, Haitham
    Horstemeyer, M. F.
    Jordon, J. B.
    Xue, Yibin
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (01): : 190 - 205
12345