MECHANICAL AND FATIGUE PROPERTIES OF MARTENSITIC Fe-13Cr AND AUSTENITIC Fe-18Cr-10Ni STEELS IN CONTACT WITH LEAD AND LEAD-BISMUTH MELTS

被引：0
|
作者：
Yaskiv, O. I. [1 ]
Fedirko, V. M. [1 ]
机构：
[1] Natl Acad Sci Ukraine, Physicomech Inst, Lvov, Ukraine
来源：
PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY | 2013年 / 05期
关键词：
D O I：
暂无
中图分类号：
O57 [原子核物理学、高能物理学];
学科分类号：
070202 ;
摘要：
The influence of liquid-metal medium on the mechanical and fatigue properties of Fe-13Cr and Fe-18Cr-10Ni steels in the temperature range 250...750 degrees C. have been investigated. It is shown that liquid metal medium facilitate a decrease in the ultimate strength of Fe-13Cr steel by 10-20% against that in vacuum, and with increase in temperature this effect is enhanced. It has been established that Fe-13Cr steel is susceptible to liquid-metal embrittlement in the temperature range 350...450 degrees C, which manifests itself more substantially in lead-bismuth eutectic. The mechanical properties of Fe-18Cr-10Ni are not considerably affected by heavy metals melts. Liquid metal medium assists in significant decreasing of fatigue life of steels. The Pb-Bi eutectic has more negative impact.
引用
收藏
页码：109 / 118
页数：10
相关论文
共 50 条
  • [31] Inhibition of the Acid Corrosion of 10Cr18Ni10Ti and 10Cr18Ni13Mo2Ti Austenitic Steels by Aqueous Extracts of Wood Bark
    Shkolnikov, E. V.
    RUSSIAN JOURNAL OF APPLIED CHEMISTRY, 2023, 96 (07) : 747 - 756
  • [32] Relationship between the Microstructure of Fe-23%Ni, Fe-33%Ni, Fe-23%Ni-0. 4%C, Fe-18%Cr-10%Ni Steels in Austenitic or Martensitic State and their Behavior after Cathodic Charging with Tritium - 1.
    Ovejero Garcia, Jose
    Metaux corrosion-industries, 1981, 56 (671-672): : 241 - 261
  • [33] Effect of γ to ε martensitic transformation on low-cycle fatigue behaviour and fatigue microstructure of Fe-15Mn-10Cr-8Ni-xSi austenitic alloys
    Nikulin, Ilya
    Sawaguchi, Takahiro
    Ogawa, Kazuyuki
    Tsuzaki, Kaneaki
    ACTA MATERIALIA, 2016, 105 : 207 - 218
  • [34] Performance of 9% Cr steels in flowing lead-bismuth eutectic at 450 and 550°C, and 10-6 mass% dissolved oxygen
    Schroer, Carsten
    Wedemeyer, Olaf
    Novotny, Josef
    Skrypnik, Aleksandr
    Konys, Juergen
    NUCLEAR ENGINEERING AND DESIGN, 2014, 280 : 661 - 672
  • [35] Effect of Arc Plasma Sintering on the Structural and Microstructural Properties of Fe-Cr-Ni Austenitic Stainless Steels
    Parikin
    Dani, M.
    Dimyati, A.
    Purnamasari, N. D.
    Sugeng, B.
    Panitra, M.
    Insani, A.
    Priyanto, T. H.
    Mustofa, S.
    Syahbuddin
    Huang, C. A.
    MAKARA JOURNAL OF TECHNOLOGY, 2021, 25 (02): : 71 - 78
  • [36] Influence of nitrogen alloying on properties of Fe-18Cr-12Mn-XN austenitic stainless steels
    Behjati, P.
    Kermanpur, A.
    Najafizadeh, A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 588 : 43 - 48
  • [37] Effect of Ti addition on corrosion behaviors of Fe-Ni-Cr-Al high entropy alloys exposed to static lead-bismuth eutectic at 550 °C
    Zhu, Guangjian
    Tan, Jibo
    Xing, Zhenqiang
    Pang, Jingyu
    Wu, Xinqiang
    Zhang, Hongwei
    Zhang, Ziyu
    Wang, Xiang
    CORROSION SCIENCE, 2024, 236
  • [38] Comparative study of stress corrosion cracking susceptibility of Fe18Cr10Mn-and Fe18Cr10Mn1Ni-based high nitrogen stainless steels
    Yoon, Young-Sub
    Ha, Heon-Young
    Lee, Tae-Ho
    Kim, Sangshik
    CORROSION SCIENCE, 2014, 88 : 337 - 348
  • [39] Mechanical and Corrosion Properties of Fe-Cr-Mn-C-N Austenitic Stainless Steels for Drill Collars
    Lee, Eunkyung
    Ryu, Jiseung
    Jeon, Seol
    Mishra, Brajendra
    Palmer, Bruce R.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (06): : 2550 - 2554
  • [40] Mechanical and Corrosion Properties of Fe-Cr-Mn-C-N Austenitic Stainless Steels for Drill Collars
    Eunkyung Lee
    Jiseung Ryu
    Seol Jeon
    Brajendra Mishra
    Bruce R. Palmer
    Metallurgical and Materials Transactions A, 2016, 47 : 2550 - 2554
12345